|
|
Multi-Body Computational Modeling of Transmission Dynamics
Líčeník, Adam ; Řehák, Kamil (referee) ; Prokop, Aleš (advisor)
This diploma thesis is focused on compiling a computational model of the transmission of a Zetor Forterra HSX tractor in the Multibody software MSC ADAMS environment. It analyses the issue of creating gears in terms of vibration and noise. The thesis describes the creation of computational model which is used for simulation of the load conditions during tractor operation. The methodology is applied to a single-stage gearbox in which is verified. Then it is used on a model of a real tractor gearbox. The response of the input load conditions is projected during the forces in the engagement of the gears which are transmitted to the bearings.
|
|
|
Characteristic of vehicle’s differential
Málek, Tomáš ; Kupčák, Radim (referee) ; Ohnišťová, Petra (advisor)
This bachelor thesis deals with characteristic of various types of differentials in motor vehicles. It represents their functions, various designs and comparisons. It also includes all wheel drive chapter. The main part is the technology of gear production which involves 3D print. There is model of differential, which was created in Solid Works 2016 specifically for this thesis. It is also printed on 3D printer and the printout is compared with a real model of differential.
|
|
|
Gear failures
Paška, Josef ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This bachelor thesis is focused on gears. The first part of the thesis informs about the sorting of each type of gears. In the second part, there is a detailed overview of possible gears failures, including their causes, manifestation and their potential solutions for correction. The last part of the thesis handles technical experiment, which aims to performance of vibrodiagnostic of the gear system, tested on the test state. Measured data were subsequently processed by commercially accessible software, where the vibrations of transmission were recorded – firstly at the beginning of measuring when the gears were without damage and afterwards at the end of testing, when the state of damaged teeth was detected.
|
|
|
Screw conveyor
Kaňa, Vojtěch ; Pokorný, Přemysl (referee) ; Jonák, Martin (advisor)
This bachelor thesis deals with proposal tilted screw conveyor in term of calculation and construction solution of tilted screw conveyor for sludge transportation in waste water treatment plant. There is a calculation of the basic parameters, proposal of gearing, proposal of bearings and strength calculation of the main parts. In the attachment we can see drawing documentation.
|
|
|
Car Front Axle Driveline Gearbox
Černuško, Lukáš ; Černý, Jiří (referee) ; Kaplan, Zdeněk (advisor)
Goal of the Master Thesis was to design conception of electric vehicle driveline, which is able of torque vectoring between each wheel independently and to design front axle gearbox. The aim was to use up the car on race track and to test dynamic properties of electric vehicle for follow-up development. Due to determined requirements and possible solutions the conception of driveline was designed and basic parameters were defined. The main part of the thesis contains a design of gearbox including strength calculation of gearing, the control of shafts to fatigue and elasticity limiting states, life of selected bearings. Gearbox case was subjected to FEM analysis. The last chapter uses simulation to gain vehicle acceleration. Designed electric driveline is applicable to other sport vehicles after some modifications.
|
|
|
Design of pneumobil driven by pneumatic motor
Podhorský, Petr ; Robenek, Dětřich (referee) ; Nevrlý, Josef (advisor)
Master thesis deals with design of "student" pneumatic car equipped by pneumatic elements of a chosen firm. The introductory part is devoted to mapping the Hungarian competition. The idea of designing such vehicles comes from this competition. Next step is analysis of vehicles that are present in this competition. The main part describes the development of vehicle from the initial design, through analysis of main components, through to the production and presentation. The work contains a strain-stress analysis of the frame which is made by using the finite element method. The work ends with the conclusion which assesses the results.
|
|
|
Gearbox for portable power generator
Kolka, Roman ; Hubáček,, Tomáš (referee) ; Bradáč, František (advisor)
The submitted project deals with a complete design of a gearbox of a portable ground power generator designed for preflight preparation of helicopters. The gearbox has been designed to meet given specifications, which are based on required electrical parameters of the entire power unit and with regards to parameters of driving turbine engine. The introductory section deals with a kinematical design of transmission gears with regards to required parameters and design constraints. The kinematical design determines whole concept and resulting form of the gearbox. Next part deals with optimization of gearing, the design of wheel bearing, and design of oil system. The implementation part of the project consists in the engineering design of the gearbox, which was made in 3D environment Pro/Engineer. The design is reviewed and first operational results of manufactured and tested gearbox are discussed in the concluding section of this work.
|
|
|
Project of worm gear for lift mechanism
Otisk, Jan ; Malach, František (referee) ; Malášek, Jiří (advisor)
This graduation thesis dwells on a worm gear design for an elevator mechanism in an already existing wheel case with actuator unit S3 for elevator type BOV 320/0,63. The work includes dimensional and control calculation for the worm gear and as an attachment you will find spiral worm and worm gear drawing documentation, including its specific location.
|
|
|
NVH Analysis of Transmissions
Gazda, Silvester ; Zubík, Martin (referee) ; Prokop, Aleš (advisor)
This bachelor's thesis deals with the design of measuring noise and vibration of vehicle transmissions. First describes the main parts of the transmission. This is followed by a description of sources of vibration and noise, and their travel. Significant work is devoted to analysis of the frequency spectrum, of its creation and evaluation. It also includes a description of the measurement and the necessary equipment, along with a description of the basic principles of its functioning.
|
|
|
Analysis of chain gears production.
Březina, Stanislav ; Zemčík, Oskar (referee) ; Zemčík, Oskar (advisor)
Analysis of chain gears production including comparison and evaluation. Description of particular kinds of chain gears and wheels. Descripton of particular technologies and methods of production of chain gears and comparison of suitability of usage of particular methods, instruments and parameters.
|
guest ::
