|
May the creation of a fund center help to increase a country's competitiveness?
Kubínová, Pavla ; Rybáček, Václav (advisor) ; Urban, Luděk (referee)
A high concentration of automotive industry in the Czech economy and its dependence on exports to Germany could be compared to a poorly diversified investment portfolio. At the time when the manual-labor-intensive industries move to countries with a lower labor costs and even stable German economy is losing pace of growth, it is necessary to consider how to support the competitiveness of the Czech economy and ensure sustainable economic growth. The work deals with the question whether a greater focus on the financial sector and with a strong collective investment market may be a possible solution. Author seeks to find the answer thru analysis of this industry and its impact on the domestic economy of the countries with the largest collective investment fund market. The analysis did not prove the initial assumption that the intensive development of the collective investment market in the country will significantly help to grow HPD. However, given the strong correlation between the volume of assets under management and HPD some kind of connection cannot be excluded. A multiplying effect on the other industries is only average, on the other hand the analysis of the competitiveness indicators showed the strength of the industry.
|
|
The Effectiveness of Conditioning Program in the Pre-season Time in Players of the KLH Chomutov Ice Hockey Team.
Jíra, Petr ; Velenský, Michael (advisor) ; Kaprálek, Tomáš (referee)
Title: The effectiveness of conditioning program in the pre-season time in players of the KLH Chomutov ice hockey team. Objectives: The main aim of this study is to determine the effectiveness of conditioning program before the season, using the Wingate Test. Another objective was to determine the load capacity in terms of the on-ice and off-ice training program. We also tried to compare the test results of younger and older players. Methods: During the actual implementation of the thesis, we used selected diagnostic instruments that characterize the level of velocity - power assumptions of ice hockey players in the men's cathegory. For testing we used the Wingate Test. The tests were applied before and at the end of the pre-season time. During the reporting period, we evaluated changes in the level of individual indicators of the Wingate Test. Results: The results show that the off-ice and on-ice conditioning programs do not have the same volume and content of the load. Increased volume and content of the load was observed in the on-ice conditioning program. The content of off-ice conditioning program in the pre-season time in ice hockey is a non-specific activity focused mainly on development of speed-strength abilities. The on-ice training program increases the proportion of the development of...
|
|
Working chamber of electron beam welder
Červinka, Petr ; Mrňa, Libor (referee) ; Daněk, Ladislav (advisor)
The submitted work deals with the design of the working chamber of the electron beam welders. This vacuum chamber of the cubic shape, with a volume of approx. 100 litres will be used in the ÚPT of the AV ČR v.v.i. during building an experimental welding with electron gun performance 2 kW with accelerating voltage 60 kV. The theoretical part is about the theory of electron welding, electron beam welders of basic sections of the facility, and about possibilities of the technology for welding working chambers. In the practical part of the thesis is being thought out the design of the working chamber (construction chamber in design software), the strength test of construction chamber in the software ANSYS and the design of appropriate methods of welding. The sample of the material which is the stainless steel 17240, from which the chamber will be made, have been used in methods of welding TIG and MAG that was verified by the suitability of the chosen methods of welding.
|
|
Large volume carrier body for swap bodies for agri truck 6 x 6
Tůma, Martin ; Pikula, Michal (referee) ; Kašpárek, Jaroslav (advisor)
This diploma thesis deals with proposal large volume carrier body for swap bodies with volume 60 m3. In beginning the thesis includes background research part. In the middle part describes the design of conception body. Work in the last part contains the strength calculations using the finite element method. Strength checks consider especially deformation and strain analysis in different load angle states. Part of the thesis is also design documentation. Work is created in co-operation with company ZDT Ltd.
|
|
Machinable bioceramics prepared by gelcasting method
Kolář, Martin ; Částková, Klára (referee) ; Trunec, Martin (advisor)
In the diploma thesis, overviews of the existing literature focused on the gelcasting method and based on the findings were prepared aqueous slurries of zirconium oxide for gelcasting method. These suspensions were examined for the influence of the content ceramics powder, type and content of dispersants and volume of initiator on viscosity of aqueous suspensions and process of polymerization. Optimum ceramic suspension had 45 vol.% of ceramic powder which was stabilized by 0,5 weight % of dispersant Dolapix CE 64. Polymerization running at room temperature was initiated by 0,175 weight % of ammonium persufate without accelerator. Microstructure of prepared ceramic blanks and sintered bodies was compared with body prepared by isostatic pressing. For the machining tests were prepared blanks in disc-shaped.
|
|
Energy law in the European Union
Flášar, Petr ; Damohorský, Milan (advisor) ; Sobotka, Michal (referee)
88 Summary Energy law in European Union This thesis focuses on the development and current situation in a sphere of Energy law. Energy is a key sector in the European Community which is becoming increasingly integrated both politically and economically and whose geopolitical responsibilities are widening. First Chapter concerns with the development of energy policy in European Union. Among first documents were important white and green papers, which laid down the foundation of European energy law legislation. For international energy situation was significant The Energy Charter Treaty as a unique instrument for the promotion of international cooperation in the energy sector. Second Chapter deals with renewable sources of energy. This area has a great importance nowadays and big volume of legislation which highly affects member states of European Union. Prominence of this chapter is climate action and renewable energy package. This package consists of several directions and one regulation and decision. Main aim is focused on reducing greenhouse gas emissions and increasing share of renewable energy sources. Legislative framework of strengthening and expansion of the Emissions Trading System is content of the third Chapter. There is an explained foundation of this system and progress during last year's. The...
|
|
Production of carrier by forming
Pluskal, Martin ; Štroner, Marek (referee) ; Kopřiva, Miloslav (advisor)
The project elaborated in frame of the engineering studies branch N2326 presenting the design of manufacturing technology of forging carrier of steel 14 220. Pursuant to the literary pursuit a problem of solid hot forming was proposed to product by drop forging with flash on 3 forging operations. All the operations are realized on the vertical crank forging press LZK 4000 B produced by ŠMERAL BRNO a.s. with nominal forming force 40 NM. Heating material on the forging temperature 1100 °C will proceed in the electric induction furnace produced by ROBOTERM s.r.o. type KSO 800kW, the flash trimming on the trimming press LDO 315 A/S with nominal forming force 3,15 MN. Dies are made from tool steel 19 552.9 and strapped in die holder QLZK 4000/UC. A part of the project is technical economic analysis evaluation and elaboration of production scheme. Expected annual volume is 100 000 pieces.
|
|
Plodnost dubu letního na území CHKO Litovelské Pomoraví - porostní variabilita a distribuce opadu
Sitta, Josef
This diploma thesis deals with fruitfulness and stand structure of Pedunculate oak mature stands (Quercus robur L.) in the Protected Landscape Area Litovelské Pomoraví. Aim of this thesis is to determine variability in stand structure and fruitfulness. A partial aim was to analyse a litter distribution under the single oak trees. In total 4 groups of stands and 3 single oak trees were analysed. Stand structure was detected by using Field Map technology on transects. This survey was representation of individual tree species, standing volume inventory, tree height, tree crown height, then positions of individual trees and their crown projection. Thereafter the indices of aggregation and competition were detected. Fruitfulness was studied in years 2013 and 2014 on plots about 1 m2 located in the center transect at intervals of 5 m. The seed containers were used as a control. Representation of oak according to the number spread over a 21 % to 38 %, according to breast-height circular base from 35% to 66 % and according to standing volume inventory from 40 % to 73 %. The fruitfull intensity in 2013 varied from 0 to 65 pcs and in 2014 from 0 to 31 pcs. The highest harvest was in stand with the largest number of oak trees. The abundance of acorns under the single oak trees from the bottom of the trunk to the edge of the crown was possible to describe by linear trend y=25,3926-0,0344×x in 2013 and y=2,2206-0,0047×x in 2014.
|
|
The manufacturing of electromotor covering
Stejskal, Luboš ; Špaček, Jindřich (referee) ; Podaný, Kamil (advisor)
This project has been presented for the bachalor branch of study, B2307, it shows the proposal of technological and production process for deep drawn parts. They are produced from the steel (11305). Due to the production volume of 100.000 pieces per year, it was proposed to implement the production process. It basis of the literature study which describes the potential pitfalls of deep drawn technology. After control a technological calculations it was decide to choose the stamping machine CTC 250 (manufactured by ŽĎAS, a.s.).The deep drawn tool has been designed in order to use the maximum capabilities of this stamping machine, specially the upper ejector and the lower holding device.
|
|
Analytical methods for hyaluronan
Černá, Lucie ; Mravec, Filip (referee) ; Pekař, Miloslav (advisor)
This thesis deals with of simple methods for determining the concentration of hyaluronan in aqueous solution and compares the performance of each selected methods such as UV -VIS spectroscopy, IR spectroscopy and the method of determination by alcian blue. These methods were chosen for their simplicity and low cost of the assay. As the most reliable of these three methods, seems to be the method of IR spectroscopy. Determination of the concentration of HA by this method is relatively accurate at concentrations above 0.4 % in deionized water. The method of UV-VIS spectroscopy is based on a linear calibration curve determination, but no characteristic peak was detected, which means that this determination could be influenced by other components of the aqueous solution. Weak ionic strength and molecular weight of HA does not affect the determination. In the method with alcian blue, the results were quite unsatisfactory and does not correspond with the literature. Therefore, this method is not applicable in this form for determining the concentration of HA. Another option for determining the concentration of the HA is ELISA method. These are commercially produced kits suitable for determining low concentrations in low volumes. Its price is higher than the above- mentioned methods.
|
guest ::
