|
|
Industrial entrance gate
Vintr, Pavel ; Hloska, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis describes the design of industrial entrance gate. It is a telescopic sliding door with passage width of 6000 mm. The aim of this thesis is to create the concept, design and calculation of functional dimensions, selection of drive and then to set power and performance ratios in the drive for operational use.
|
|
| |
|
|
The Alchemy like the Gate to Luck
Erös, Roman ; Čechura, Jaroslav (advisor) ; Zdichynec, Jan (referee)
Synopsis The aim of this Bachelor thesis is not rendered and reveal the alchymist procedures, but rather to know the thinking of the alchemists and their destinies, because not all of them were con artists who would like to share the fraudulent ways and so enrich at the expense of its surroundings. A few of them not only made money, but even borrowed, and eventually ended up in prison. Most of them really believe in their dreams of actinide transmutation and extending the life and the other on the contrary, have ceased to believe in the miracle of riches by using the transmutation and rather started to think about whether something like that is possible and then go back to the top. And it was actually the beginning of the inquiry and that of the beginning of a new scientific discipline and chemistry. Of course, that together with the effort of the alchemists of actinide transmutation of metals, and search for the stone is associated and the destinies of famous players of this science and it, from the founder of the Herma Trismegistose to the present, because the dream of the alchemists is not foreign or today's man.
|
|
|
Autonomous Management of Intelligent Home
Punčochářová, Pavlína ; Viktorin, Jan (referee) ; Korček, Pavol (advisor)
Currently, the topic of smart home is not new and there are many solutions for this problem on a market. Emphasis is placed on miniaturization of the individual elements of an intelligent system and control logic of the system as a whole. This is associated with requirement for ensuring management capabilities of the system in case of failure of the connection between some of the functional elements and the control member. This work deals with design and implementation of modifications in intelligent home gateway in an existing BeeeOn project to ensure its autonomy even in case of loss of internet connection. The problem of loss of ability to manage the household is solved by adding the possibility to establish direct communication with the gateway and the introduce automation ability into gates to control household without the participation of the controlling member. This extension brings autonomy into the system and allows user to have the household under control even in case of loss of internet connection. It leads to increase system security and quality of service in general.
|
|
|
Analysis of Trench Insulated Gate Bipolar Transistors
Karlovský, Juraj ; Polčák, Josef (referee) ; Bábor, Petr (advisor)
This thesis is focused on the selection and optimalization of suitable analytical methods for study of TIGBT (Trench Insulated Gate Bipolar Transistor) structures with a use of methods, that depict material composition of the studied sample. The theoretical part contain explana-tions of the analytical methods used for measurements and basic principle of operation of an TIGBT transistor. The practical part contain the methodic of measurements and the evaluation of the obtained data and design of optimal procedures in done experiments.
|
|
|
Control system for cantilever gates
Koždoň, Ondřej ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
In this bachelor's thesis is designed and in detail described a battery powered control system for wireless controlling swing gate. This system is designed as a small electronical system with necessary Inputs/Outputs (I/O) an Input for powering from solar cells and it is equipped with requisite software.
|
|
|
Control system for cantilever gates
Koždoň, Ondřej ; Arm, Jakub (referee) ; Bradáč, Zdeněk (advisor)
The goal of this bachelor's thesis is to design a battery powered control system for wireless controlling swing gate (may be used for cantilever sliding gates or garage doors). This system is designed as a small electronic system with necessary Inputs/Outputs (I/O) and an Input for charging a battery from solar cells. The result of this bachelor's thesis are two main PCBs with dimensions of 5×5cm for controlling the gate and remote controller with dimensions of 2,3×4,4cm. Main PCB allows adding more remotes, deleting all remotes and modes for the way of controlling the gate (opposite direction, open only, close only, open wing, close wing, stop the gate) and selecting Master/Slave gate. Communication works on frequency of 434MHz.
|
|
|
GUI for Handling Genetic Programming Chromozome
Staurovská, Jana ; Žaloudek, Luděk (referee) ; Jaroš, Jiří (advisor)
The main goal of this thesis is to create a program for manipulation with genetic programming chromosomes, which should allow export to a vector graphics format, moving of gates, their colouring and other graphical operations, and will work on different operating systems (mainly Microsoft Windows and Linux). For better understanding, the basic principles of cartesian genetic programming are described in theoretical part.
|
|
|
A Tool for Visual Analysis of Circuit Evolution
Staurovská, Jana ; Minařík, Miloš (referee) ; Sekanina, Lukáš (advisor)
The main goal of the master's thesis is to compose a study on cartesian genetic programming with focus on evolution of circuits and to design a concept for visualisation of this evolution. Another goal is to create a program to visualise the circuit evolution in cartesian genetic programming, its generations and chromosomes. The program is capable of visualising the changes between generations and chromosomes and comparing more chromosomes at once. Several user cases had been prepared for the resulting program.
|
|
|
Arithmetic Circuit Generator
Bolješik, Michal ; Mrázek, Vojtěch (referee) ; Vašíček, Zdeněk (advisor)
The goal of this thesis is to design and implement a tool that would be able to generate a description of various types of arithmetic circuits, such as adders and multipliers, that are involved in more complex systems (filters, transformations, etc.). The first part of the thesis deals with analysis of different types of adders and multipliers on either theoretical or practical level. In the second part there is a description of the design and implementation of the tool created in Python language. On base of parameters, the tool is able to generate hierarchical or flattened description of various circuits in formats aimed for visualization, simulation and validation. In the end, the tool is used to compare different designs of adders and multipliers.
|
guest ::
