|
|
Heating of multifunkcional building
Kořenková, Veronika ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The goal of this bachelor thesis is to introduce a heating system solution for multifunctional building. Thesis is divided into theroretical, calculation and project parts. Theoretical part is focused on the definition of fittings in heating systems. Second part depict the proposal of heating system and heat preparation of the multifunctional building, which contains veterinary clinic and housing units. Gas condensing boiler is chosen as a source of heat. The building is heated by steel panel radiators and towel rail radiators. Preparation of hot water is done by two indirect heating water storage tanks. Preheating of water is supported by solar collectors. Project part of the thesis contains technical report and drawing, based on the calculation part.
|
|
|
Fittings of heating systems
Klus, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The theme of this diploma thesis is fittings of heating systems and it is divided into three parts. The first part deals with this topic on theoretical level. In the second part, there is a calculations and drawings that deals with heating and water heating of the apartment building in Uherské Hradiště. This part is solved in two variants concerning hydraulic balancing and regulation of the heating system. The last part of the thesis is an experimental solution and processing of pressure loss results of selected valves. These results are compared with the values reported by the manufactures of the valve.
|
|
|
Water supply of scout camp by hydraulic ram
Růžička, Jakub ; Duchan, David (referee) ; Špano, Miroslav (advisor)
This work is dealing with water supply of a scout camp from Trusovický potok. The water is pumped with a ram pump to the water tank. The construction of the ram pump is simplified and it is collected from commonly available fittings and fixtures. The water from the tank is distributed by pipe network gravitationaly. Operating charakteristics of the hydraulic ram pump were measured in the laboratory.
|
|
|
Pressure loss valves in heating systems
Náglová, Michaela ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The theoretical part of the thesis deals with the hydraulics of heating systems. The aim of the project is a design of the heating and hot water preparation system for an apartment building. The building has 6 above-ground floors and 2 underground floors. Two different options of heating systems were designed, comparison and results are presented in the thesis. In the first case the heat source during the winter season and for water heating, where chosen two gas condensing boilers, situated in separated room on the second underground floor. In the second case, each apartment has its own gas condensing boiler. The experimental part of the project deals with measurements of pressure losses in water armatures used in heating systems. The aim of this part is the determination of coefficients of added resistance for uncontrolled elements, which are normally presented as tabular value. In thesis are presented results for a ball valve, backflow preventer, filter, for slide valve and thermostatic valve. Measurements for thermostatic valve where done with different settings and results are compared with parameters listed in the datasheet.
|
|
|
Safety of automated industrial valves in operating conditions
Kryštof, Ondřej ; Trávníček, Petr (referee) ; Kotek, Luboš (advisor)
Choosing suitable and safe valve with accessories depends on general specifications for plant. Using valve for on/off, throttling, back-flow prevention, etc., pressure drop is related with Kv value or leakages from piping systems are main factors for properly valve selection. Valve have to resist chemicals and substances that may change the state, temperature and its fluctuation, pressure, corrosion and erosion. This properties determine pressure class, temperature resistance, connection into pipe and sealing material as gland packing, seats, seal between flange etc. This and other specification, listed in this thesis, can help determine suitable type of valve. This thesis deals construction design of valve and accessories as well. The last chapters are focused on calculation of safety valve and selection safe and appropriate control valve with accessories.
|
|
|
Design and lay-out of high pressure pumping station.
Václavík, Tomáš ; Franc, Zdeněk (referee) ; Habán, Vladimír (advisor)
The aim of diploma thesis is design and lay-out of high pressure pumping station with plunger pumps for splash of scales from slabs of hot-rolled. Theoretic (introduction) part of this thesis contain description of formation of scales and description of ways how it is possible remove these scales. And this part contains also explication of effect of water jet on solid material. The practical part of diploma thesis is focused on design of pumping station including of dimensioning of machinery. Part of this work is also technical documentation for proposed pumping station and specification of main machines and devices.
|
|
|
Energy storage in Building services systems
Bílek, Martin ; Počinková, Marcela (referee) ; Horák, Petr (advisor)
The subject of this thesis is energy storage systems in building services. In the first part the theoretical acquaintance with the nature of energy storage. In the second part has two variants preparation hot water in an apartment building. In the third part of the test solution storage tank of hot water. Development of computational algorithms, comparison of calculation used and the final summary.
|
|
|
Fluid power heating system
Paták, Jiří ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The theoretical part deal with problematic of fluid power heating system. The experimental part deal with measurement of the characteristic of circulation pump and measurement of valves - ball valve. The project solves the heating and hot water preparing for the new administrative building in Žďár nad Sázavou. The building has 3 floors. As a source of heat for the winter season is designed gas boiler, for hot water preparing is also used the same gas boiler. The heat source is placed in a separately accessible room.
|
|
|
Foundation Design of the Athletics Stadium in Pilsner
Drs, Jakub ; Boštík, Jiří (referee) ; Glisníková, Věra (advisor)
The task of thisbachelor dissertation is to describe the concept of safe and economic foundation of the athletic stadium in Plzeň, the Czech Republic. The concept and assessment are developer on the basis of obtained geotechnical conditions and the load of the construction. The calculations are based upon valid forms and the concept approaches. Furthermore, the thesis focuses on technology and working proces of large diameter bored piles.
|
|
|
Condensing boiler and solar collectors in a residential building
Bukovjan, Jiří ; Vendlová, Lucie (referee) ; Horák, Petr (advisor)
The subject of this thesis is the heating and hot water preparation in the residential house in Rožnov pod Radhoštěm. Object has four floors and basement. In each floor there are two residential units. In thebasement there is a utility room with heating, gas boiler cascade. Used to heat-pipe heatingsystem. Heating surfaces are plate and tubular body. The primary source of hot water is gasboiler. As a secondary source of alternative preparation with solar system.
|
guest ::
