|
| |
|
|
Virtual prototype of mechatronic system
Dinga, Milan ; Březina, Lukáš (referee) ; Hadaš, Zdeněk (advisor)
This thesis deals with modeling of delta 3D printer virtual prototype and its co-simulation using software ADAMS and MATLAB/SIMULINK. The first part consists of virtual model creation and its kinematic analysis. Then a model of electric motors is created. The final part consists of co-simulation and control design.
|
|
|
Construction and production the extension of bicycle pedal
Jurka, Adam ; Zouhar, Jan (referee) ; Jaroš, Aleš (advisor)
Bachelor thesis is focused on the construction and production of extension of bicycle pedal which will be used while cycling withnout cycling spikes. Component will be constructed in 3D parametrical software Autodesk Inventor. Model will be manufactured using Fused Deposition Modeling technology with utilization of 3D printer uPrint. One part of thesis is about manufacturing of silicon mould which will be used for casting of plastic model. Thesis is finished with technical-economic evaluation.
|
|
|
Design and implementation of 3D printer with network printing support
Špringer, Radek ; Hošek, Jiří (referee) ; Krajsa, Ondřej (advisor)
The goal of this thesis is to design a 3D printer type delta. To describe 3D printing technologies used by this printer, basic printer features and commercially available material used at the print and its comparison. To define all hardware components, which are necessary for construction of the 3D printer type delta. To create a proposal and construct an expansion board to which all hardware components of the printer will be connected. To optimize the print space heating and cooling of the printout. To extend the 3D printer with a Web server, which will ensure the network printing possibility.
|
|
|
3D Printer
Ctibor, Jiří ; Knobloch, Jan (referee) ; Cipín, Radoslav (advisor)
Master thesis deals with topic about 3D printers, concretely making hardware of control and power electronic for FDM 3D printer. The work could offer an overview about basic 3D printing technologies after reading. More information could be read about FDM technology, which is used in our printer, also with description of all important components. The furthest is discussed about electronic drives. If reader is interested in this topic, part of this thesis is schematic design of control electronics, which can be used to build own boards. Design of printed circuit boards is not present in attachment and can be obtained by contacting the author. For own control is used one of the open source control software. Mechanical problems and also mechanical design is done in parallel thesis by other student of Faculty of mechanical engineering.
|
|
| |
|
|
3D Printing Machine Control
Kočár, Darius ; Kršek, Přemysl (referee) ; Španěl, Michal (advisor)
This thesis is about creating library for control of the 3D printing machine. Printer active axes are realized by stepper motors from Microcon Corporation connected with CD30x control unit. Communication between application and control units is via RS232 serial link. Part of this work is dedicated to application showing typical usage of this library.
|
|
|
Production and aplication of 3D FDM deltabot printer
Knapil, Josef ; Fiala, Zdeněk (referee) ; Zemčík, Oskar (advisor)
The thesis describes design and aplication of 3D FDM printer type of delta. The first part describes methods of rapid prototyping. The second part describes 3D printers type of delta. The third part deals with construction and calibration of delta printer. In the fourth part are made suitable modifications to the design of the printer, to improve the quality of printing, which is then applied on a sample product. The final section is devoted to technical and economic evaluation.
|
|
|
Design of 3D printer for high strength materials
Žlebek, Michal ; Dočkal, Aleš (referee) ; Koutný, Daniel (advisor)
Thesis deals with FDM 3D printing method and testing capabilities of optimum printing conditions for different materials. The aim of this work is to design and manufacture of experimental device that enables printing to investigate these conditions. A device designed in this work was named UK3DP and allows dual color object printing with maximum dimensions of the square base of 150 mm and a height of 150 mm. Before printing, the user can set almost all parameters affecting the printing process, including air temperature in heated chamber that is part of it. To verify the functionality several materials are tested, including ABS, PC and PEI. It also describes basic verification of the influence of selected parameters on the print result. Performs tensile tests confirming the influence of ambient temperature during printing on the quality of fiber connections, examines the final quality of the surface for each layer height and compares the resulting deformation of printed objects with other printers. The result of this work is a 3D printer capable of testing printing conditions for both existing and new types of materials with a range of user adjustable parameters.
|
|
|
Design and realisation of 3D printer with high resolution of print
Peml, Luboš ; Hadaš, Zdeněk (referee) ; Dušek, Daniel (advisor)
This thesis deals with the design and realisation of the stereolithographic 3D printer using DLP projector. The work describes the selection of suitable components for the printer´s mechanical construction and manufacturing of this construction, the solution of printer´s electronics and creation of the printer´s host software and firmware. Recommendations based on executed experiments for the parameters´ values settings have been given here.
|
guest ::
