|
Differences between men and women in the Czech labour market
Stroukal, Dominik ; Kadeřábková, Božena (advisor) ; Pavelka, Tomáš (referee) ; Němec, Otakar (referee)
This thesis consists of five articles that apply current world research on labor economics at the Czech Republic and confirms the significant differences between men and women in this market. It shows that gender has a significant influence on the preference on the labor market and, consequently, on employment and health. First, the thesis shows that preferences are relevant determinant of career and then we study the difference in preference of salary for men and women. Subsequently it shows that gender plays a significant role in explaining the relationship between homeownership, and unemployment, as well as unemployment and health. The first chapter was able to demonstrate that the preference for a career has a positive influence on the choice of career. The influence of higher education on prioritizing career proved to be positive and significant. Probability of a career choice is reduced by the presence of children, however, is not dependent on their number, which is contrary to the theory of preferences. The second chapter shows that Czech women prefer more non-monetary rewards than men. It has also been shown that people with university education are same in the preferences of non-monetary rewards regardless of the gender of the respondents, however, compared to the world's research, the Czech higher education increases this preference. It turned out that women prefer risk less than men. The third chapter demonstrates that although the housing market undermines labor mobility and employment in the Czech Republic at the regional level, therefore, that in regions with a higher rate of home ownership is higher unemployment, at the individual level, the owners of housing are unemployed are less likely. The estimates are significantly different for men and women. Men living in owner-occupied housing have a higher likelihood of employment than women. At regional level, however, this thesis shows that the high rate of home ownership increases unemployment for both men and women, in the long run only to women. The fourth chapter showed that men transition to homeownership reduces the likelihood of unemployment next year. For women, this relationship has proved to be insignificant. In addition, as insignificant showed the opposite relationship, the transition from unemployment to the newly acquired home ownership. The last chapter shows that the change in the working status to unemployment will increase in the future probability of worse health. Influence in less than two years, however, proved to be significant. An important conclusion is that men have a significantly stronger relationship between health and unemployment than women.
|
|
Possibilities of Big Data use for Competitive Intelligence
Verníček, Marek ; Molnár, Zdeněk (advisor) ; Šperková, Lucie (referee)
The main purpose of this thesis is to investigate the use of Big Data for the methods and procedures of Competitive Intelligence. Among the goals of the work is a toolkit for small and large businesses which is supposed to support their work with the whole process of Big Data work. Another goal is to design an effective solution of processing Big Data to gain a competitive advantage in business. The theoretical part of the work processes available scientific literature in the Czech Republic and abroad as well as describes the current state of Competitive Intelligence, and Big Data as one of its possible sources. Subsequently, the work deals with the characteristics of Big Data, the differences from working with common data, the need for a thorough preparation and Big Data applicability for the methods of Competitive Intelligence. The practical part is focused on analysis of Big Data tools available in the market with regard to the whole process from data collection to the analysis report preparation and integration of the entire solution into an automated state. The outcome of this part is the Big Data software toolkit for small and large businesses based on their budget. The final part of the work is devoted to the classification of the most promising business areas, which can benefit from the use of Big Data the most in order to gain competitive advantages and proposes the most effective solution of working with Big Data. Among other benefits of this work are expansion of the range of resources for Competitive Intelligence and in-depth analysis of possibilities of Big Data usage, designed to help professionals make use of this hitherto untapped potential to improve market position, gain new customers and strengthen the existing user base.
|
| |
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
HYDROGEN ABSORPTION IN A-Co30Fe55B15
Čermák, Jiří ; Král, Lubomír ; Roupcová, Pavla
Hydrogen solved in amorphous alloys (AAs) influences their magnetic characteristics. AAs are also perspective\nas additives that can improve hydrogen storage kinetic in certain types of ball-milled hydrogen storage\nmaterials (HSMs). Therefore, knowledge of hydrogen solubility and hydrogen sorption kinetics in AAs are of a\ngreat importance for aimed design both AAs with optimal magnetic parameters and HSMs with desired sorption\ncharacteristics. In the present paper, amorphous alloy Co30Fe55B15 (an example of the type a-TM1xTM2y Bz ;\nTM - transition metal) was investigated. Hydrogen concentration c H was measured by Sieverts method in\ntemperature interval from T = 150 °C to T = 350 °C under hydrogen pressure p up to 6 MPa. It was found that\nc H was an increasing function of p and its maximum value was typically 0.5 wt.% H2 at 350 °C and 6 MPa.\nHowever, when the alloy was preliminary hydrogen charged (PHC), the pressure dependence of total c Htot in\nthe first absorption cycle(s) is non-monotonous in dependence on PHC conditions. For the sake of comparison,\nthe same absorption characteristics were measured also in Mg2Ni intermetallic that is a common constituent\nin Mg-based HSMs. Comparing Co30Fe55B15 and Mg2Ni, it was concluded that Co30Fe55B15 shows lower\nhydrogen solubility, but much better absorption kinetics.
|
|
Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.
|
|
Cut Languages in Rational Bases
Šíma, Jiří ; Savický, Petr
We introduce a so-called cut language which contains the representations of numbers in a rational base that are less than a given threshold. The cut languages can be used to refine the analysis of neural net models between integer and rational weights. We prove a necessary and sufficient condition when a cut language is regular, which is based on the concept of a quasi-periodic power series. We show that any cut language with a rational threshold is context-sensitive while examples of non-context-free cut languages are presented.
Fulltext: content.csg -  PDF
Plný tet: v1236-16 - PDF
|
|
Neural Networks Between Integer and Rational Weights
Šíma, Jiří
The analysis of the computational power of neural networks with the weight parameters between integer and rational numbers is refined. We study an intermediate model of binary-state neural networks with integer weights, corresponding to finite automata, which is extended with an extra analog unit with rational weights, as already two additional analog units allow for Turing universality. We characterize the languages that are accepted by this model in terms of so-called cut languages which are combined in a certain way by usual string operations. We employ this characterization for proving that the languages accepted by neural networks with an analog unit are context-sensitive and we present an explicit example of such non-context-free languages. In addition, we formulate a sufficient condition when these networks accept only regular languages in terms of quasi-periodicity of parameters derived from their weights.
Fulltext: content.csg - PDF
Plný tet: v1237-16 - PDF
|
|
Determination of content substances for selected species and varieties of roses.
Slavíková, Eva ; Sus, Josef (advisor) ; Súkeníková, Tereza (referee)
This bachelor's work is focused on comparing the most significant content substance, vitamin C, in fruits of chosen rose kinds species and varieties. Herbal products are often seen by people as products of "second choice", when failure of allopathic treatment occurs, which is focused especially on suppressing symptoms of illness, but it ignores health of the human body as whole. That's why are herbal products often alternative for therapy of chronic diseases. The base of this work is extensive literary research and results of laboratory measurings. Literary part of this work includes description of botanical classification of rose plants. There is stated basic characteristic of individual rose species and their morphological features. In following chapters is composed overview of effective substances in rose fruits and their effect on human health. In practical part of this work are included results of laboratory tests for determining ascorbic acid content for chosen samples of rose species and it also includes results of weighing and measuring of fruit samples of chosen rose species. There are also stated chosen rose species and shortly their origin and description, in the beginning of practical part. For practical part were chosen samples of species. Results of practical part are compiled into statistic tables and graphs and it confirms high content of ascorbic acid in rose fruits. This content is in range of cca 300 - 900 mg.100 g-1. Due to growing interest in alternative treatment options and "clean" natural product, it can be assumed, that many plants of Rosaceae family will keep its place in treatment practice. Those plants will be used not only for treatment of acute and chronic diseases, but also for cosmetic products production, thanks to its large effects and process options.
|
|
Natural houses in gardens
Formánková, Kristýna ; Kunt, Miroslav (advisor)
Thesis discusses natural houses which are supposed to be part of our lives in the future. These houses may be for someone and they might prefer smarter building with non-recyclable materials when choosing a new housing. But it is necessary to think about our future and sustainable development. We also need to tell ourselves what is really a priority for our planet. There comes a time when they will prefer building materials which can be used somehow after some time or be recycled. This is related to the design of the garden. It is designed to fulfil an ornamental, economic and social function. The garden is an integral part of each house, therefore it is important for each element used to be creating the garden as a linked harmonious whole. The study deals with the concept of a natural houses home in accordance with the maximum use of the garden.
|
guest ::
