|
Renewable energy legislation
Kučerová, Veronika ; Štěpánek, Petr (advisor) ; Černý, Pavel (referee)
This master thesis discusses current legislation in the field of supported and renewable energy sources. At the beginning of the thesis are defined renewable energy sources from the perspective of Czech legislation and of professional view. The second part is focused on legislation regarding renewable energy sources in the European Union and the Czech Republic. Follows an overview of the support tools and legislation regarding renewable energy sources in other member states of the European Union and the current status of the set objectives related to the share of energy from renewable sources in gross final energy consumption, which have been established by Directive 2009/28/EC. At the end is summary, along with an overview of the most successful and least successful countries in terms of achieving the objective.
|
|
Possibilities of Big Data use for Competitive Intelligence
Verníček, Marek ; Molnár, Zdeněk (advisor) ; Šperková, Lucie (referee)
The main purpose of this thesis is to investigate the use of Big Data for the methods and procedures of Competitive Intelligence. Among the goals of the work is a toolkit for small and large businesses which is supposed to support their work with the whole process of Big Data work. Another goal is to design an effective solution of processing Big Data to gain a competitive advantage in business. The theoretical part of the work processes available scientific literature in the Czech Republic and abroad as well as describes the current state of Competitive Intelligence, and Big Data as one of its possible sources. Subsequently, the work deals with the characteristics of Big Data, the differences from working with common data, the need for a thorough preparation and Big Data applicability for the methods of Competitive Intelligence. The practical part is focused on analysis of Big Data tools available in the market with regard to the whole process from data collection to the analysis report preparation and integration of the entire solution into an automated state. The outcome of this part is the Big Data software toolkit for small and large businesses based on their budget. The final part of the work is devoted to the classification of the most promising business areas, which can benefit from the use of Big Data the most in order to gain competitive advantages and proposes the most effective solution of working with Big Data. Among other benefits of this work are expansion of the range of resources for Competitive Intelligence and in-depth analysis of possibilities of Big Data usage, designed to help professionals make use of this hitherto untapped potential to improve market position, gain new customers and strengthen the existing user base.
|
|
Výběr a implementace open source nástroje pro řízení portfolia projektů
Marek, Jan ; Chlapek, Dušan (advisor) ; Kučera, Jan (referee)
Methods and ways of implementation of changes and innovations in companies through project management are in today's society very well established. There exists methodologies, techniques and tools for the management of individual projects. However in a role of project manager, I very often faced the fact that companies are performing the project portfolio management in very intuitive way. This in itself leads to failed and prematurely terminated projects, initiation of the wrong projects or realisation of correct projects, but at the wrong time. Very often I have also recognized, that there is lack of awareness of fact, that there are also Open Source applications that can help with the organization's portfolio. This thesis deals with the definition of requirements, search and selection of proper OSS application and subsequent implementation. In the first part of this thesis I prepare a theoretical framework about PPM, and on that basis then identify and verify a set of requirements for selection of right OSS PPM application. The next section of thesis describes searching for suitable applications from a variety of sources, assessment against the requirements and the final selection. In the last part the implementation project is drafted, which aims to serve other colleagues in project management as one of the possible implementation paths. The outputs are then continuously confronted with experts in matter of projects and project management in the field of IT in order to maximize symbiosis between theory and real life experiences. Virtually every project management methodology defines the collection of already-proven techniques, best practices or lessons learned from the previous similar implementations. The main contribution of this thesis I see in fact that it contains not only the design of the project implementation, but also describes a logical path, what leads to the result. Therefore this thesis could be used as a base or discussed best practice, when a project of implementation of PPM application in place.
|
|
Awareness of Volunteering in the Czech Republic and Abroad among Students of the Faculty of Health and Social Studies of South Bohemia University
MARKOVÁ, Marcela
My work is focused on the volunteering. It aims to introduce the Healthy Social Faculty of the Southern Bohemian University in České Budějovice (ZSF JU) and its faculty volunteering. It describes where the volunteers can involve themselves (Czech Republic and abroad) and also the condition of volunteering at the faculty (regarding how many students are involved and informed). My work is supposed to be a study material for students of ZSF JU. It can be used as an information source for the faculty management and it can also be an inspiration for the future concept about volunteering. It has two parts; theoretical and practical (experimental) one. The structure of ZSF JU and the history of the volunteering at the faculty are described in the first part. Moreover there are definitions of: volunteering, volunteer, types of volunteering and its legislation base including the brief Czech history of volunteering. Following part informs about benefits of volunteering and particular fields where we can find volunteers. Theoretical part is finished with a chapter about international volunteering. The aim of the practical part is to analyze how students are informed about possibilities and benefits of volunteering in the Czech Republic and in the world. The aim of my work is set up there and also the hypothesis which have been confirmed or uprooted. Moreover the methodology of the practical part is explained there. I have used a questionnaire method via server "Vyplnto.cz". The questionnaire itself was send using collective correspondence to all student´s email addresses at ZSF JU. There were 478 valid responds from the students of ZSF JU both distance and daily study. Following chapter presents research results gained through statistics of graphs and charts. You can see results of each question in context with other parameters as age, sex, form of study or field of study. The hypotheses were tested via statistics methodology of good matching, called "Chi-square distribution". The results show that students of ZSF JU are informed about possibilities of volunteering in CZ. However they lack information about possibilities abroad. Students of distance study are better informed and more involved than students from daily study. Another part is a chapter called Discussion, where particular results are interpreted and compared with results of similar researches. In the final part you can find the resume of the results and the evaluation of the aim. Students from ZSF JU have quite a good knowledge about volunteering. However, in some concrete parts there is a space for improvement. The conclusion of the work offers some solutions.
|
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
Fytochemical potencial of polyfenols contain in berries
KRUMPHANZLOVÁ, Iva
This thesis sums up findings on polyphenols and their positive influence on human health. In these fytochemicals, unlike in micronutrients, recommended daily amount cannot be estimated. Micronutrient deficiency in food can cause deficiency symptoms, while in polyphenol deficiency, the deficiency does not occur. When they are present in sufficient amount in food, it is considered functional food, which is important for civilization illnesses prevention. At the beginning of the theoretical part, the polyphenol classification from pharmacological and chemical point of view is represented. On the basis of this classification important role of antioxidants and flavonoids is described. Special attention is being paid to resveratrol, which is populardue to its well known "French paradox". The following part considers the polyphenol influence on human health. The way in which polyphenols protect our body from certain diseases is explained in detail. Most of the health benefits are supported by studies conducted on animals. These studies are also mentioned and described in this paper. In the theoretical part the process of absorption and the polyphenols safety for human body is also explained. Polyphenol sources are listed in the last subchapter. The work is mainly aimed at blueberry fruits (Vaccinium myrtillus) and vine grapes (Vitis vinifera). Other berries are briefly mentioned as well, such as cranberries, raspberries, blackberries and currant. The goal of this work is to create a diet that would provide a functional daily amount of polyphenols. This amount can be compared to 120 ml of native blueberries. Only products, consumable without cooking, are used in this diet. The second goal is to chart, which food products are adequate source of polyphenols. On the basis of these goals, research inquiries were defined. Research inquiry No. 1: What amount of polyphenols is contained in berries, especially blueberries. Research inquiry No. 2: Which food products (without cooking) are ideal to be included in diet, to provide adequate daily amount of polyphenols. To asses polyphenol content in blueberries, analysis of polyphenol content acquired through GEOMED program from Nemocnice České Budějovice a.s., department of clinical pharmacology, was used. Assessments were made using the HPLC method (high performance liquid chromatography) in cooperation with the biological centre AV ČR in České Budějovice. Thanks to this analysis, the first inquiry can be answered. An interesting phenomenon is discovered, that frozen blueberries have higher polyphenol content then cooled ones. Malvidin (malvidin-3-6"-acetoyl glycoside) was chosen as priority anthocyan since it is most represented in the blueberry. Remaining information about polyphenol content in certain food products were drawn on Joseph Maroon´s book, MD, FACS (2010). The practical part involves a diet for 14 days, which meets the given requirements. The results clearly show that it is possible to create a diet rich in polyphenols. A list of blueberry products accessible to everyone is included. Blueberry dairy products, jams, beverages, fruit salads and fruit pyre have been analysed. The list shows which product contains the most polyphenols. The required amount can be achieved by the proper combination of given products. The ideal one proved to be 200 ml of red wine and one blueberry dairy product (with the malvidin value higher than 64). Findings in this paper will serve to promote polyphenol awareness and itseffects. This diet can be used in nursing homes, where their positive influence on equilibrium can be applied. It can also be used in spas and other alimentation related facilities.
|
|
The position of Czech electronic industry in global production network
Suchá, Tereza ; Blažek, Jiří (advisor) ; Ženka, Jan (referee)
The presented thesis deals with the position of the Czech electronic industry in global production network. The goal of this work was to determine whether the suppliers of the Czech electronic industry are involved in global production network and if so to assess the nature and the form of this involvement. The partial goal of this work was also to evaluate if there are common features of geographic concentration of the Czech electronic industry in the past and the present. The analysis was based on information for individual companies from Amadeus database and other sources. The result of conducted analyzes was a finding that there are two types of companies in Czech economy: independent and involved in global production network. From the companies involved in global production network the most of them can be found on the lowest positions in the network and therefore ocuppying the less favorable position. Despite these not very hopeful results we can see that for the companies on the position of the 3rd grade there was identified inter-sectoral upgrading even though in a limited degree. The common features of geographic concentration of the Czech electronic industry in the past and the present were also confirmed. Key words: global production network, electronic industry, upgrading, tiered structure
|
|
Nutritional analysis and optimization of breeding of selected species of edible insects under conditions of the Czech Republic with regard to human health
Adámková, Anna ; Kouřimská, Lenka (advisor)
All over the world, the edible insects are considered a highly nutritious food with high protein and fat content. However, the nutritional value of insect is not constant. It can be affected by species, developmental stage, rearing technology or nutrition.
Therefore, this thesis was aimed at obtaining the selected nutritional value of edible insects. Analyses were focused on the determination of the crude protein content, fat content, fatty acid profile and sterols in selected species of edible insects, which can be commonly reared in the Czech Republic. At the same time we also analysed samples of insects reared on the island of Sumatra to evaluate the influence of the climate on the nutritional value. The main aim of the thesis was the determination of optimal breeding conditions, developmental stages and feed rations for obtaining good production of insects with nutritional properties suitable for human nutrition. The analyses showed a high nutritional value of selected insect species, but also confirmed the significant differences in the content of individual nutrients between different species depending on the climate conditions and developmental stage. Comparing the fat and crude protein content in edible insects and other conventional sources of meat it has been found, that the examined insect is similar to beef concerning the fat and crude protein content. The results obtained are the basis for determining the appropriate rearing conditions and developmental stages for obtaining insect with the desired nutritional properties for human nutrition.
|
|
The use of biomass ash
Ochecová, Pavla ; Tlustoš, Pavel (advisor) ; Radim, Radim (referee)
One of the most frequently used sources of renewable energy is biomass, mainly wood biomass. Incineration is the most common technology utilizing the energy from biomass to produce heat. A byproduct of these technologies is ash, whose composition depends on the feedstock composition and the incineration technologies. Due to the high content of valuable nutrients in ash, one of the suitable option for ash utilization seems to be application into agricultural or forestry land. Therefore, it is necessary to test response of soils and plants and look for the most suitable combination of soil additive (biomass ash), and plants. Experimental part of PhD thesis was divided into the incubation experiment and the vegetation pot experiments. The incubation experiment: The efficiency of ash addition at two application rates was tested for nutrients enrichment in different soils within period of 56 days. The vegetation pot experiments: The two plants Triticum aestivum L: (three-year experiment) and Lolium perenne L. (one-year experiment) were planted in the 5L pots. Soils were treated with ash or ash combinated by superphoshate and flue gas desulfurization gypsum. For both plants, we evaluated the plant growth, biomass production and content of macro, micro and toxic elements in the biomass and in the soils.
|
|
Frequency stabilized semiconductor laser source for high-resolution interferometry
Řeřucha, Šimon ; Hucl, Václav ; Holá, Miroslava ; Čížek, Martin ; Pham, Minh Tuan ; Pravdová, Lenka ; Lazar, Josef ; Číp, Ondřej
We have assembled an experimental iodine stabilized Distributed Bragg Reflector (DBR) diode based laser system lasing at a wavelength that is in a close proximity to the wavelength of a stabilized He-Ne lasers traditionally used for metrological applications (λ=632.9 nm in vacuum). The aim was to verify whether such a system could be used as an alternative to the He-Ne laser while yielding wider optical frequency tuning range, higher output power and high frequency modulation capability. We have measured the basic characteristics of the laser source and then we have compared the performance of the laser system with that of a traditional frequency stabilized He-Ne laser with a series of experimental arrangements similar to those usually found in laser interferometry and displacement metrology applications. The results indicate that DBR diode laser system provides a good laser source for applications in dimensional (nano)metrology since it provides more output power and advanced tunability options than stabilized He-Ne lasers while maintaining fundamental requirements such as the frequency stability, coherence length and also a defined traceability.\n\n
|
guest ::
