|
|
Design of Hoist
Olešovský, Michal ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
The topic of my Bachelor´s thesis project is a concept design of Service Hoist for foodstuff transport. Submited project is described by this Technical report which contains, except total description, description of components needed for propper function of designed equipment and necessary calculations. The drawing documentation is also a part of my project.
|
|
|
The New Block of Flats
Jelínek, Roman ; Hnízdilová, Aneta Aya (referee) ; Manychová, Monika (advisor)
The subject of the bachelor thesis is a new apartment building with nearly zero energy consumption and the processing of the design documentation for this building construction. The building is located in a quiet area of the village of Lužice near the town Hodonín. It is designed as a detached structure, with a partial basement and three floors, located on a slightly sloping terrain. In the basement you can find the maintenance room of the building, and the cellar cubicles for the individual apartments. On the first floor there are three apartments with their own front gardens, as well as the common areas of the bike shed, the drying room and also the fitness room. On the second floor there are four apartments with their own terraces. Now, on the third floor there are two very spacious apartments with large terraces. In front of the building there is a large parking lot, the apartment building is barrier-free by to the internal elevator. The construction system of the building is a two-way wall system. The above-ground floors are built with ceramic blocks. The perimeter masonry of the basement is consist of blocks of permanent formwork. The horizontal structures are prefamonolithic, composed of POT beams and Miako ceramic inserts. The building is based on concrete foundation strips and covered with a single-layer flat roof.
|
|
|
Living house
Bouček, Václav ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The aim of my master’s thesis is a project of a new apartment building at a level of the documentation for the structure realization. The thesis contains text, drawings and calculation part. The house is designed as a detached house. Residential house is situated in flat terrain. The building is full basement with four above-ground floor. The house has 16 housing units. The construction system is a combined brick. The structural system of the basement part is made up of permanent shuttering. The floors are of brick blocks HELUZ. In the middle of the building is constructed elevator. The ceiling structure is made of prefabricated prestressed panels Spiroll. The roof consists of single-layer flat roof. The thesis also includes thermal and technical expertise and the calculation of the foundation structure.
|
|
|
Apartment House
Ingr, Jakub ; Dvořák, Martin (referee) ; Lavický, Miloš (advisor)
The aim of the bachelor thesis is to elaborate the project documentation of residental building in the village Moravský Písek. The house is as a detached house, without basement. It has rectangular size and is covered with a flat one coat roof. On the first floor there is a technical background and common areas. 2nd to 4th floor is used for housing and there are nine residential units in total. The house is build from brick with a contact thermal insulation system. Part of the project documentation is also a basic assessment of the building in terms of building physics.
|
|
|
Apartment Building
Nádvorník, Pavel ; Vystrčil, Jan (referee) ; Košíčková, Ivana (advisor)
The aim of the bachelor's thesis is the elaboration of project documentation for the construction or for the issuance of a building permit referred to in § 108 paragraph 1 of the Building Act for an apartment building in the cadastral area of Jistebnice. The building is located on the outskirts of the city in a built-up area on a slightly sloping plot number 234. It is a new building in the area. Where there are no apartment buildings yet, but the plot is intended for this use. The building is designed as a basement apartment building with 4 floors above ground and one underground floor, in which there are a total of 11 apartments. There are always 3 flats on the first three floors, and there are two flats on the fourth. Three apartments are smaller for couples and starting families, the rest are designed as for families of 3 to 4 members. A parking lot with one parking space for each apartment has been built on the plot. The construction system of the building is a wall, made of PORTHERM ceramic blocks. The ceilings are reinforced concrete slabs. The roof is single-skinned above the living space, double-skinned above the staircase.
|
|
|
Multifunctional house in Jablonec nad Nisou
Klinke, Jakub ; Průša, David (referee) ; Štěpánek, Ladislav (advisor)
The subject of the bachelor thesis is the design of a multifunctional apartment building with large flats and the elaboration of construction documentation. The building is situated in a quiet location of the statutory city of Jablonec nad Nisou in a nearby distance from the dam, which is used for rest and recreation. The surrounding development consists of apartment buildings from the beginning of the last century with a height of three to four floors. The building itself is detached with four floors and one basement. On the first floor there is an establishment intended for administrative use. The first floor also contains a barrier-free apartment and a barrier-free entrance to the building. On the level of the first floor, there is also a car park with barrier-free access to the building. There are always 2 apartments on the other floors. The basement is designed as a technical floor and there are also cellars belonging to the apartments.
|
|
|
BIKEZONE.cz - Bikeshop with flats
Barták, Martin ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The aim of the diploma thesis „BIKEZONE.CZ – bikeshop with flats“ is development of detailed documentation to build the bikeshop with flats for permanent living for sixty person on the land number 337/4, in the city named Hradec Králové – Kukleny. The building is designed with the master plan and the surrounding construction and appropriately mounted on the adjacent intersection. The building is designed as a four-floors, partial basement with two-floors bikeshop with own service and the flat part with seventeen flats of the size two or three bedrooms with kitchen. Next to building are designed two car parkings with capacity for 25 cars. The main entrance to the shop is from the street Pražská třída where is a parking for customers a the main entrace to the flat house is from the street Pálenecká. The supporting part will consist of a combination of sand-lime bricks KM BETA and monolithic ceiling and column. The non-supporting part will of sand-lime bricks KM BETA. The roof is flat with a waterproofing membrane of flexible PVC surcharge laundered gravel. Insulation of the building envelope will contact system ETICS terminated blending facade of dark and light gray colors. Doors and windows are wooden with golden oak color shade.
|
|
|
Apartment House
Němec, Nikola ; Karlík, Štěpán (referee) ; Lavický, Miloš (advisor)
This bachelor’s thesis solves a project documentation of Apartment House and contains appurtenances according to valid regulations. The house is designed as a detached house, without basement. It has a non-standard size and is covered with a flat vegetation roof. The house has five floors with balconies. The house has 12 dwelling units. On the first floor is accessory apartments: bicycle and pram room, utility room, utility room and cellar rooms. In the house is designed a elevator. The house is made of precast concrete frame and infill wall with a contact thermal insulation system.
|
|
|
Block of Flats
Jánská, Kamila ; Lavická, Radomila (referee) ; Lavický, Miloš (advisor)
Diploma thesis describes the design and processing of project documentation of the apartment building. The apartment building is located in the central part of the city of Brno, in the district of Štýřice. The building has 5 floors. Its basementless with flat roof and it is based on the footings of plain concrete. Load-bearing, peripheral walls and partitions are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO built on POT supports. Peripheral walls of all floors are insulated with external thermal insulation composite system ETICS with thermal insulation of mineral wool. In the place of the plinth is wool replaced by XPS polystyrene. In the facade there are anchored wooden lattice constructions using ProPasiv anchors. These constructions are covered by façade cladding sheets CEMBRIT METRO and they devide whole building into separate units. There is housing and communal part of the building. On the first floor there are storage areas, the main service room, utility room and two barrier-free apartments. In the second to the fifth floor there are 9 residential units, one of which is designed as duplex apartment . All floors are connected by staircase and wheelchair lift. Parking for 17 cars is designed in front of the building . Two parking spaces are wheelchair accessible.
|
|
|
Apartment house
Antoš, Jan ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
The master´s thesis "Apartment house" is in form of project documentation containing all appropriateness in accordance with valid regulations. The house is designed as a detached house and without a cellar. The house is rectangular dimension, with a flat vegetation roof. The house has four floors with loggias, balconies and terraces. The house has 10 housing units. On the first floor is the accessory apartments: bicycle room, technical room, cellar room and garage. In the house is projected a lift. The house is made of brick system with a contact insulated system. The part of thesis is a heat-technical opinion, calculations staircase and foundation construction.
|
guest ::
