|
|
The Reconstruction of a Stell Structure two-storey Building.
Rapant, Jaromír ; Pilgr, Milan (referee) ; Buchta, Stanislav (advisor)
his thesis deals with exploration of paper mill building, structural load, and assessment of current load bearing structure and proposing reconstruction. Bearing structure is entirely made out of steel and it’s done as XYZ frame. The building is located in Olsany u Sumperka, this defines the climate. The paper mill is of a platform of 54,0 x 48,25 m. It’s a two floor building with average height of 13,22m. Thesis contains foto documentation of the building and tests of strength of the steel in the bearing structure. Small statistical calculation was done, of all current elements of the steel structure. And necessary reconstruction was based on these calculations.
|
|
|
Panel meassurement device
Vaško, Pavel ; Kaczmarczyk, Václav (referee) ; Bradáč, Zdeněk (advisor)
The master thesis includes a literature search, which is focused on questions around panel measure instruments for measuring analog voltage signals. There is the block diagram and the concept of measuring voltage values designed from collected information and defined requirements to the device. In the next step a design of the circuit diagram is created and published and consequently transferred into PCB. The whole board has been fabricated, assembled and tested. The firmware development starts with the definition of basic functional blocks for using of internal elements of the device, which is followed by the implementation of the Modbus slave station service routine. The top part presents graphical user interface on the device.
|
|
|
The Study of Benefits in an Engineering Company.
Kabelíková, Kateřina ; Bednářová, Kamila (referee) ; Jurová, Marie (advisor)
This diploma thesis deals with evaluation and optimization of the system of benefits in an engineering company. Introductory part of the thesis describes the basic ways to increase motivation of employees through the comprehensive system of remuneration and benefits. Next part of the thesis presents a comparison of benefits provided by companies operating in the Czech Republic and the particular engineering company ABC. Practical part of the thesis carries out a survey focused on the most frequently provided benefits by different companies. The thesis also includes the questionnaire in which the interest for specific benefits was expressed. The benefits in which the greatest interest was shown are supplied with a financial description of costs for the employer. The conclusion provides additional recommendations for further optimization of the questionnaire and specific proposals to improve the system of benefits in the engineering company ABC.
|
|
|
Telepresence Autonomous Robot for Exploration of Unapproachable Areas
Krkavec, Martin ; Janoušek, Vladimír (referee) ; Rozman, Jaroslav (advisor)
The subject of this master's thesis was to get familiar with a robot developed at the Department of Intelligent Systems of FIT VUT Brno. The goal of this work was to design and then implement hardware and software improvements of the robot so it could be capable of telepresence exploration of a narrow cave using remote control, including autonomous return back to the entrance. Also suggest possible extensions for a further improvement of the robot.
|
|
|
Technical survey of the family house
Odstrčil, Štěpán ; Láník, Jaromír (referee) ; Schmid, Pavel (advisor)
This bachelor’s thesis deals with diagnostics of one object divided to 4 residence units. Technical construction resarch had to be made due to owned wants knock down his residence unit and build a new family house instead o fit. Object is located on the street Žebětínek 17 in Brno-Medlánky. Resarch includes enumeration of all damages before demoliton o rafter that, diagnostics of object wich is being demolished and consequences of demolition to buildings nearby.
|
|
|
Proposal of a Firm Expansion in Retail Sale of Foodstuffs
Škrdlík, Miloš ; MBA, Tomáš Vican, MSc, (referee) ; Mikulec, Luděk (advisor)
Master´s thesis presents the proposal of firm expansion for the company which is exclusively czech retail system of shops of food and convenience stores. The objective of the thesis is an optimization of the strategy in a such way, which will ensure to gain a competitive advantage, perspective and healthy growth of the company in next years. The first part of the thesis is focused on a summary of teoretical knowledge, which is concerning given problems. In the next part of the thesis analysis of the company is made and on the basis of the analysis there are some possible solutions suggested.
|
|
|
Customer satisfaction analysis at MANN+HUMMEL (CZ) Přibyslavice
Kirchdorferová, Alena ; Březinová, Veronika (referee) ; Chalupský, Vladimír (advisor)
This master's thesis is concerned with the analysis of customer satisfaction with the company MANN+ HUMMEL (CZ). In the theoretical part it is concerned with the explanation of the fundamental terms which connect with these problems and methods of satisfaction recognition. Then the company characterization and present conditions of the solution to these problems follow. In the practical part there is customer satisfaction determined by the questionnaire method in combination with direct interviews with the customers. The questionnaires are subsequently evaluated. The proposals arise from the research results. They should bring improvement in customer satisfaction, including the introduction of the cost of the implementation of these steps.
|
|
|
Diagnostic methods for the evaluation of the state of timber structures
Dvořáčková, Soňa ; Anton, Ondřej (referee) ; Heřmánková, Věra (advisor)
This Bachelor´s thesis is focused on diagnostics methods which are destructive, semidestructive and non-destructive. Thanks to these methods, we find out features and characteristics of the material. In the thesis, there is performed diagnostic measurement on a wooden beam and comparing of the results from the method of thorn resistance placement and the results from wood strength measured along the grain. At the end of the thesis there are mentioned statistics calculations.
|
|
|
Survey and Diagnostics of Reinforced Concrete Construction
Pokorný, Jakub ; Vítek, Lubomír (referee) ; Anton, Ondřej (advisor)
The thesis Building Investigation and Diagnosis of Reinforced Concrete Structure is focused on analyzing two reinforced concrete bridge structures. It discusses different evaluation surveys and its influence on later evaluation of the bridges. In this thesis there is included static evaluation finding supports at one of reinforced concrete bridges. Practical part is complemented by the necessary theoretical part, which deals with exploring bridges, ways of their implementation, and a summary of the most commonly used diagnostic methods for bridges.
|
|
|
Operating and technical condition of the sewer network
Škařupová, Karolína ; Raček, Jakub (referee) ; Raclavský, Jaroslav (advisor)
The aim of this bachelor thesis was to prepare a list of methods which used for analyzing the operational and technical condition of the sewer network. In this thesis, I worked up a support software program in Excel which is based on the proposed 756905 TNV (Design) for the assessment of sewer networks, sewer systems and buildings. The first part is treated by means of research and deals with methods and apparatus to determine the operational and technical condition of the sewer network. To better understand the issue, this part be supplemented with information from the design of sewer networks and sewage connections. The second part deals with the technical assessment of the sewer network and classification coding system according to EN 13508-2 and 756,905 according to TNV (Design).
|
guest ::
