|
|
HW and SW for Ethernet-to-IEEE802.15.4 bridge
Růžička, Tomáš ; Štohl, Radek (referee) ; Fiedler, Petr (advisor)
In this work we deal with the converter, to serve as a bridge between the two protocols. These protocols are Ethernet and wireless IEEE 802.15.4 protocol. Wireless part of this work, however, I simulated via serial RS 232nd After Ehternetu can send data via TCP or UPD protocol. First is the need for a converter to connect to the network and then create a packet. Finally, it is necessary to also address the views received and sent data via Ethernet and the RS-232.
|
|
|
Design and realization of V/I and I/V symmetrical converters
Chrást, Jakub ; Koton, Jaroslav (referee) ; Jeřábek, Jan (advisor)
Master´s thesis deals about design of symmetrical converters voltage on current and current on voltage. These converters will be used for measuring frequency characteristics of differential frequency filters. Current feedback amplifier was used as active element. Some circuits useful for this function were chosen. Various integrated circuits were put into these circuits. All variations were simulated in computer program Orcad. In terms of computer simulations the best variation was chosen. Selected variants were practically verified and control measuring were realized.
|
|
|
HiFi DA Converter with Integrated Headphone Amplifier
Doležal, Pavel ; Jaroš, Jiří (referee) ; Šimek, Václav (advisor)
This thesis is dealing with a design and fabrication of D/A coverter and headphone amplifier for stereo reproduction in Hi-Fi class. In opening chapter, overall problematics of digital audio signal distribution is discussed. Following chapters are dedicated to converter design, communication protocols, component selection, converter production, circuitry design and firmware programming. The final chapter is dealing with expansion options such as HDMI inputs and surround sound.
|
|
|
An Ethernet-CAN controller for mobile robots
Uherka, Bohumil ; Florián, Tomáš (referee) ; Burian, František (advisor)
The diploma thesis deals with creating the Ethernet converter protocol UDP of the CAN bus with the used application layer CANopen. The converter is executed by means of the microcontroller ARM Cortex-M3, namely by STM32F107VC by STMicroelectronics. The project is designed for the purpose of serving as the main motor controlling card of the mobile advertising robot FektBot. In the theoretical part you can find a brief analysis of the ARM microcotrollers problematics, particularly the STM32F107VC. Then the thesis introduces the Ethernet technology including the UDP protocol. Finally, the CAN bus and its application layer CANopen is described. The practical part shows first of all the scheme of converter hardware. You can find there the design of printed circuits including all components for proper functioning, i.e. especially the microcontroller STM32F107VC, Ethernet PHY, the CAN bus transceiver and switched stabilized supply. Next chapter describes software creating for the given converter. Firstly there are analyzed possible ways of STM32F107VC programming, and then there is the main conception of resolving the programming part shown. The thesis then deals with the concrete implementation of the UDP Ethernet protocol. For that, the lwIP stack is used, over which the application layer of the FektBot robot works. Then there is analyzed the implementation of the CAN bus and CANopen. At the end of the practical part, the final execution of the converter software and the ways of its testing are described.
|
|
|
Possibility of Measurement Automation
Ilichman, Ondřej ; Košíková, Jana (referee) ; Vdoleček, František (advisor)
The thesis is focused on the automation of measurement with the using of hardware and software. Efforts to objectification processes and eliminating human influence on the outcome are increasingly reflected in the technical fields of measurement. In this work, methods of measurement modification, transformation and subsequent analysis of the measured quantity are discussed. Since nowadays it is possible to automate nearly all types of measurement, it is shown, under what circumstances is appropriate to use automated measurements. The final section is devoted to solution of software and hardware design for measuring temperature in the server room. They are proposed 3 possible solutions and on the basis of their analysis the optimal variant is chosen.
|
|
|
Analysis of methods of measurement of fully-differential frequency filters
Kučera, Tomáš ; Kubánek, David (referee) ; Jeřábek, Jan (advisor)
This bachelor thesis focuses on measurements methods of differential frequency -selection filters with active elements in current mode. Firstly it describes differential frequency-selection filters in current mode and conversions from voltage to current mode. Next the thesis deals with measuring of particular voltage converters to differential current and back from differential current to voltage, which is an integral part for measurements of differential frequency-selection filters in current mode. For design of particular converters there was used program OrCAD there and subsequent simulation was executed in program PSpice.
|
|
|
Implementation of USB/LAN/WIFI interface
Voneš, Jaroslav ; Roubal, Zdeněk (referee) ; Steinbauer, Miloslav (advisor)
This bachelor thesis goes into implementing the most modern communication interfaces USB/LAN/WIFI to control the computer itself and also the incubator via a Web interface. The term describes the overall solution to the management of the incubator for using microcontroller ATmega8 with the possibility of the exchange of communication interfaces. For the USB converter was used the circuit FTDI FT232 BM company, from LANTRONIX Ethernet was used for Converter converter XPORT and eventually to communicate the WIFI was elected circuit ESP 8266
|
|
| |
|
|
Regulated Syntax-Directed Translation
Dvořák, Tomáš ; Kocman, Radim (referee) ; Meduna, Alexandr (advisor)
This thesis deals with formal and syntax directed translation. This thesis contains theoretical part, which defines regular, context free, context sensitive and recursively enumerable languages a grammar. There are given examples of grammars which are able to generate languages that are not context free. Covered by this thesis are matrix grammars, random context grammars and programed grammars. Researched are also finite, pushdown, deep and regular automata, transducers and their part within format syntax directed translation. This project also defines regular transducers based as regulated automata. Thesis defines regulated methods of syntax analysis based on predictive parsers. These methods cover analysis of studied regulated grammars. The final part of this thesis describes new language capable of effective description of these grammars and compiler producing parser code for these grammars written in this new language and their graphical analyzer.
|
|
|
Transformation of Equation Editor Expressions to LaTeX
Šimek, Jiří ; Jirák, Ota (referee) ; Křivka, Zbyněk (advisor)
The bachelor thesis deals with the problem of transformation of Equation editor expressions to LaTeX. It presents description of Equation editor expressions in Word 2007, it subsequently focuses on the syntax of particular expressions and it suggests the ways of their transformation into LaTeX. The grammar, which was used for the implementation of the converter, is designed on the basis of the syntax of expressions.
|
guest ::
