|
| |
|
|
Apartment Building
Jaroš, Daniel ; Vystrčil, Jan (referee) ; Košíčková, Ivana (advisor)
The subject of the bachelor’s thesis is project documentation of new appartment building in Znojmo on street Trentská. Designed building is similiar to surrounding existing buildings, the house is four storeyed, with basement and recessing last storey with flat roof. Every above-ground floor has three residential units of categories one to three rooms with open-plan kitchen with the exception of last floor, where’s one bigger residential unit of three room category with open-plan kitchen. Residential unit n.3 in 1st floor is designed for person with reduced mobility. Designed appartment building is built with modern technologies, load-bearing walls of above-ground part of the building are made from clay blocks in 2in1 and AKU variants. Underground part of the building is made from structural formwork with concrete and rod reinforcement. Building’s foundation will be made of cast-in-place concrete strip footing with reinforced concrete floor slab. Load-bearign part of ceiling construction is made of reinforced concrete ceiling slab. Staircase is also made as reinforced concrete slab with stair steps made of concrete.
|
|
|
Apartment building, Brandýs nad Labem-Stará Boleslav
Králík, Martin ; Osička, Jan (referee) ; Sukopová, Dáša (advisor)
The subject of the bachelor thesis is the documentation for the construction of a residential building in Brandýs nad Labem - Stará Boleslav. The apartment building will be located in a quiet zone of a two-storey building in a future residential development. Residential building is detached. It will be based on flat terrain. The apartment building is L-shaped (it consists of two rectangles). The building has 5 floors and 1 underground floor. There are a total of 19 apartments in the building, technical facilities and storage facilities are located in the underground part of the building. Residential building is basement. The building is covered with a flat vegetation roof. The peripheral above-ground structure is made of therm-shaped blocks, insulated with ETICS contact thermal insulation system. The main entrance to the building is from the northeast side of the building.
|
|
|
Penzion SKI - Orlické hory
Kubík, Jan ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
The content of the master thesis is processing of project documentation for he mountain boarding house in Zdobnice in Orlické hory, first done as a pilot project and then as a building construction project. It concerns a three floor building. Vertical load-bearing structures are made of ceramic blocks. Horizontal load-bearing structures are made of prestressed hollow core slabs. Roofing is solved with mono-pitched roof and flat roof. The access to building is from the west for the public and from the east for the staff. There is the ski and bike rental in this building.
|
|
|
Influence of technical and natural seismicity on building structures with focus on structures of masonry materials
Čada, Zdeněk ; Králik,, Juraj (referee) ; prof. Ing. Alois Materna, CSc., MBA (referee) ; Krejsa,, Martin (referee) ; Salajka, Vlastislav (advisor)
The dissertation deals with selected issues in the field of the calculation of the response of building structures which are excited with dynamic non-stationary displacement loading of its ground. Seismic load has been assumed. Procedures, how to work with seismic records with respect to the accuracy of dynamic calculations, how to modify the response spectrum to ensure the reliability, how to generate synthetic accelerogram requiring more accurate response, are recommended. Synthetic akcelerogram has been generated by own approaching, which has been used as the excitation function in the experimental seismic testing of autoclaved concrete brick building in model scale. Response values of motion in the measured points of the experiment were compared with the linear and nonlinear dynamic calculations by using the finite element method models. Different levels of detail of the numerical models have been used. The shear wall behaviour has been modelled by using constitutive models with brittle failure as well as using of non-linear interaction interface with possible delamination between the masonry bricks. The behaviour of the mathematical model of wall systems has been calibrated with respect to the measured data at shear wall experiments in real and model scale of walls.
|
|
|
Apartment building
Kománková, Barbora ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The subject of the bachelor's thesis is the working-out of project documents for apartment building in the district Poštorná in Břeclav. The apartment building is built from the POROTHERM system and it has a flat roof. It is a not free-standing three-story house with an elevator and there is not a cellar. On each floor are housing units. The first floor has technical structure of the building and one unit. There are two apartment units on the second floor and also on the third floor. Covering of building is warm deck flat roof. The building is insulated with the contact system ETICS from facade polystyren. Built-up area is 219,10 m2.
|
|
|
Technological project of an indoor tennis hall construction in Uherský Brod location
Něnička, Roman ; Venkrbec, Václav (referee) ; Diaz, Yvetta (advisor)
The thesis is focused on the technological project of an indoor tennis hall construction in Uherský Brod. It is completely embracing the construction of the hall in terms of a carcass with its roofing. It reveals a technical report that describes the construction with reference to the used construction materials, positioning in the site and looking into its impact of the building on the environment. The following aim of the thesis is also a design of a machinery needed to implement the object. It also shows an assessment of machines and mechanization transport routes in terms of road traffic, a time and financial plan of construction, a draft and design of the equipment construction site, an analysis of economic costs of the construction, a material resources plan for the construction, a technological regulation of a flat roof and a quality test scheme along the construction.
|
|
|
Diagnostic research of the family house
David, Jan ; Láník, Jaromír (referee) ; Schmid, Pavel (advisor)
This bachelor’s thesis deals with technical construction research of the family house which is located in 15 Horní Street in Brno. Technical construction research had to be made, due to the change of the owner of the house and to determine the status for possible reconstruction. Research includes description of the methodology of diagnostic work on building and evaluation of research with results and draft measures. The results consider the state of structure and status of its component parts.
|
|
|
Diagnostic and Reconstruction Design of Brick Building in Medlice
Košárek, Jan ; Cikrle, Petr (referee) ; Kocáb, Dalibor (advisor)
Master’s thesis deals with diagnostics and reconstruction of neo-gothic chapel in Medlice. Summary of appropriate testing methods for this chapel is compiled. Visual examination of whole structure have been performed by diagnostics. Masonry element strength was found out at specimens which had were taken out from structure (drill cores and whole bricks). Masonry elements also was tested by Schmidt hammer LB. Mortar was tested by Kucera’s drill. Masonry strength required for static calculation was computed from achieved values. After examination of all structure defects have been designed reconstruction by post-tensioning.
|
|
|
Apartment building
Handlíř, Tomáš ; Pospíšil, Jaroslav (referee) ; Kacálek, Petr (advisor)
The bachelor's thesis deals with the documentation for the construction of an apartment building. Building is a two-storey partially basement object. There are four residential units on the upper floors of the building. Each apartment is endowed with a terrace or loggia. In the basement there are rooms for household equipment such as cellars, a drying room, a common room, a cleaning room and a utility room. Project is dealing with parking problems by creating 6 parking places. Masonry longitudinal construction with use of the Porotherm system is designed for construction system. Basement construction system is masonry with permanent formwork concrete blocks. Stairs and ceiling structures are designed as cast-in-place reinforced concrete. Foundation is designed as plain concrete foundation strips. Roof is a warm flat roof with modified bitumen membrane for the main waterproof layer. The building is insulated with the contact thermal insulation system ETICS made of facade polystyrene.
|
guest ::
