|
|
Glazier's Hall
Kelar, Petr ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
The bachelor's thesis deal with structural design of Glazier's hall. Dimension of the hall are 9,24 m x 24,51 m. The basic material is steel S355. The main frame is three-hidged frame. Each frames are connected by the purlins and girts. Spatial rigidity of the structure is provided by the rigid frame corners and sway bracings. Part of the design is crane runway for bridge crane from Demag company with load capacity of 5 t. Structure i designed in compliance with valid standards of ČSN EN and corresponds with ultimate and serviceability limit state. For structural design was used software RFEM 5.07.03 of Dlubal company.
|
|
|
Crane cat of a stoplog handling crane
Oliva, Petr ; Nezbeda, Jiří (referee) ; Škopán, Miroslav (advisor)
This master´s thesis deals with the design of a crane trolley with the main and ancillary lift according to the specified parameters. The aim of the work is the elaboration of technical calculations and drawing documentation. The technical report deals with the design of lifting mechanisms, travelling mechanism and design and strength control of the crane frame. The drawing documentation includes a stroke assembly drawing, a travel assembly drawing, a frame steel structure assembly drawing, and a general crane cat assembly drawing.
|
|
|
Modification of the overhead crane laboratory model
Begáň, Matej ; Kašpárek, Jaroslav (referee) ; Pokorný, Prokop (advisor)
The aim of my bachelor thesis is to design the laboratory model of the bridge crane trolley. Which means the thesis has to be done in several parts and is therefore divided into a written and practical section. First part deals and survey industrial solution. Next parts, these are already part of the practical section, are focused on the design of the laboratory model of the bridge crane trolley, the economic analysis of my proposal and the whole thesis is completed by set on selected drawings of components.
|
|
|
Crane trolley 32 t
Knapec, Tomáš ; Nezbeda, Jiří (referee) ; Škopán, Miroslav (advisor)
This master’s thesis is the design development of crane trolley, which is used to manipulate with scrap material. The target of this thesis is to develop a technical report including calculations of running and lifting gear, strength calculation of frame of trolley and drawings containing assembly of crane trolley and assemblies of running and lifting gear. Desired parameters of this trolley are maximum load capacity 32 000 kg, lifting height of 11 m, working lifting speed up to 10 m/min and working running speed up to 50 m/min.
|
|
|
Bridge crane reconstuction
Ježek, Tomáš ; Škopán, Miroslav (referee) ; Kubín, Martin (advisor)
Bachelor's thesis is focused on renovating the bridge crane. The main aim of this thesis is to design all the drives and the design of mechanical parts, which will be the replacement engine also renovate. This work is divided into two parts. The first part is a documented original condition of the bridge crane and a second part of this thesis deals with the actual calculation of each propulsion and design mechanical parts.
|
|
|
Frame of foundry trolley crane 330 t
Otevřel, Marek ; Kolář, Pavel (referee) ; Pokorný, Přemysl (advisor)
The topic of this diploma thesis is the frame of the foundry trolley crane 330/65/20t. The crane crab is used for handling with molten metal. The frame is analyzed by strength inspection and fatigue strength inspection. The process is according to ČSN EN 13001. The analyses are made by using finite element method on a beam and shell models. The diploma thesis was made in cooperation with the Královopolská a.s. company.
|
|
|
Analysis of crab frame of bridge magnet crane 15t 27,5m
Strommer, Bohumír ; Kolář, Pavel (referee) ; Pokorný, Přemysl (advisor)
The diploma thesis deals with crab frame of bridge magnet crane with lifting capacity 15t used in steel mill for handling billets. Thesis contains strength analysis and fatigue strength check of crab frame based on ČSN EN 13001. Strength analyses are made by using beam and shell models of finite element method. The diploma thesis was carried out in cooperation with Královopolská a.s. company.
|
|
|
The design of the crane tracks in a production hall
Lobreis, Jan ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
This work focuses on the design and assessment of the steel crane runways for two separated craneswith the capacity of 20 t, respectively 50/12.5 t. The main girder of the crane runway is designed as a welded uniaxially symmetric I-section consist a lattice horizontal reinforcing beam. The individual crane tracks are located within the building two-aisle production hall (one in each boat) with dimensions of 75 x 48 m and height of 14.9 meters. The building is located in an industrial area Holešov and its supporting structure is designed from crosslinks consisting of solid-welded columns and truss. Spatial rigidity of the hall is provided by tension bracings. The structures are made of the steel S 235. For designing of a production hall (for the assessment) it is only software Scia Engineer (planar model) used. The design and evaluation of crane runways are compute by hand calculation.
|
|
|
Scrap crane cat - rotating part
Begáň, Matej ; Basista, Filip (referee) ; Škopán, Miroslav (advisor)
The diploma thesis deals with a design of a rotating part of a crane trolley of a scrap crane with a load capacity of 110,000 kg, which is situated in an exterior environment. The aim of the diploma thesis is a design and calculation verified design of the lifting mechanism, rotation mechanism and the design of a spacious traverse, which is used for the manipulation of the scrap trough and casting ladle.
|
|
|
The Three Aisled Storage Building
Malý, Jan ; Sýkora, Karel (referee) ; Buchta, Stanislav (advisor)
The subject of this bachelor´s thesis is the design and assessment of steel structure three-aisled storage building. The width of the side aisles is 12 meters and the width of the main aisles is 24 meters. The length of storage building is 60 meters. The height of the building is 14.65 meters. In the main aisles traversed, by two bridge cranes, each with a capacity of 5 tons. The supporting structure consists of main truss, the distance is 6 meters. Storage building is designed for the area of Zlín.
|
guest ::
