|
|
Serial Data concentrator in VHDL
Řeháček, Tomáš ; Valach, Soběslav (referee) ; Burian, František (advisor)
In the bachelor’s thesis text there are summarized basics of VHDL language, ISE Webpack development environment is described. Also the way of communication and properties of serial unit are described as well as Ethernet standard properties and the way of communication via MII interface. Hardware used for the data concentrator design is briefly introduced in the next part. At the end of the thesis there is analysis of the data concentrator design for data transmission from serial unit to Ethernet using protocols UDP/IP.
|
|
|
Half Duplex radio modem
Urbaník, Jaroslav ; Šebela, Radek (referee) ; Prokopec, Jan (advisor)
This bachelor thesis deals with a concept description and realization of wireless system for transmission of control signal. The system is designed for a half-duplex operation mode. Various options for system realization of the task solution is mentioned and described. The work analyses the choice of particular components and their intercommunication as well. PCB and Atmega16 microcontroller software technology is also concerned about. The usage of this wireless system is universal and it is possible to adapt it for particular application.
|
|
|
Meteo Probe for the Measurement of Basic Atmospheric Quantities
Pumr, Martin ; Vlk, Jan (referee) ; Chudý, Peter (advisor)
The bachelor thesis focuses on the problematics on basic atmosphere sounding. Its content is a study of the physical properties of the atmosphere. Based on these findings, the design and implementation of a specimen meteorological probe and ground receiving station are carried out. The meteorological probe records atmospheric data at regular intervals and stores them in CSV format. The probe continuously reports information about its position, and after completion of the measurement sends all measured data to the ground receiving station, where data evaluation and further processing takes place.
|
|
|
Development of monitoring application for a production cell workspace with SICK scanners
Dostál, Tomáš ; Kovář, Jiří (referee) ; Andrš, Ondřej (advisor)
This thesis is about scanners of SICK company and monitoring methods in workspaces. Next in this thesis is described implementation of monitoring methods in robotic industry. Objective of practical part was design, implementation and to test application created in LabVIEW for monitoring workspaces. Created application contains choice of use serial communication with scanner SICK PLS 101-312 or possibility to create simulation of monitoring workspace. In conclusion both choices are tested and evaluated.
|
|
|
Serial communication
Novotný, Bohumil ; Šilhavý, Pavel (referee) ; Martinásek, Zdeněk (advisor)
Bachelor work is focused on the issue of a serial communication interface RS-232,USB, I2C and SPI, and also discusses the use of the laboratory module for experimental purposes. Laboratory module is designed with respect to the functional elements that will resist daily use of students. This work is detailed principles of serial communication in relation to each interface. The second part is devoted to method the module structure, functions of its individual components and functional solution output connectable to an oscilloscope and other measuring devices.
|
|
|
Secure PC Connection
Winter, Jan ; Škarvada, Jaroslav (referee) ; Kubek, Ján (advisor)
Aim of this master's thesis is the creation of serial communication interface for FITkit. This serial interface is a full duplex industrial bus based on 20mA loop circuit and it should allow connection of two FITkits by RS-485. Aim of this paper is to design simple software allowing communication of two FITkits and to secure this communication on RS-485 link against interference or transfer errors.
|
|
|
Remote Control and Measurement with Linux
Ševcovic, Jiří ; Herrman, Tomáš (referee) ; Škarvada, Jaroslav (advisor)
The destination of this work was a creation of modular system for a remote control and measurement with Linux operation system. People use an I2C bus, connected to serial port of a computer. Aplication is made with C++ language to perfom a remote control of systems.Application communicates with web interface, which is controlled by user.
|
|
|
Position sensing detector
Ha, Tuan ; Wilfert, Otakar (referee) ; Barcík, Peter (advisor)
This thesis deals with design of a laser position detector. Different types of sensor are mentioned and compared at the beginning. Special attention is paid to quadrant sensor. Its pros and cons are discussed with designing methods. The sensor is simulated in Matlab to test its output response. Then the laboratory tests follow to meassure real response of the chip. Then follows the design of the detector based on measured and simulated data. In the conclusion of this thesis parameters of created device are evaluated.
|
|
|
System for Serial Communication Monitoring
Perný, Jan ; Kováč, Michal (referee) ; Kolouch, Jaromír (advisor)
There is a need for a serial communication testing tool when software or hardware developers have to solve serial communication problems. This tool must accurately catch and record the whole communication. Some type of timestamps in the record is necessary for future analysis. This diploma thesis deals with programming a serial communication monitoring equipment software with the possibility of the insertion of timestamps. Possible timestamps types and inserting methods are also discussed. The programmed monitoring software for the FOX Board hardware platform is able to catch and record the serial communication at RS232 ports and add timestamps to the record in accordance to three independent rules. The record is saved to a standard USB flash drive.
|
|
|
Embedded System for Orienteers Race Organization Support
Kavan, Tomáš ; Přibyl, Bronislav (referee) ; Beran, Vítězslav (advisor)
This thesis deals with the design and production of prototype terminal for supporting organization within orienteering races. The aim of this work is to integrate all important computer facilities, currently used in the practice of orienteering races or training, into a portable compact embedded system in the size of a common terminal for accepting credit cards. The secondary objective of this thesis is creation of cross-platform Open Source library for communication with SPORTIdent control units.
|
guest ::
