|
|
Development of transmission
Kocman, František ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This bachelor thesis is focused on current trends of passenger car transmissions. The goal was to compile an overview of individual concepts with regards to the current trends. For each concept, there is a description of its construction and principle. The practical part is focused on the calculation of the basic parameters of a dual clutch transmission.
|
|
|
Tractor Shift Mechanism Analysis
Netopil, Jan ; Řehák, Kamil (referee) ; Prokop, Aleš (advisor)
The thesis focuses on the shifting mechanisms of manually shifted tractor transmissions. It provides a comprehensive overview of all significant structural nodes of the shift mechanism with an analysis of the influence of the structure on the resulting intensity of a force required for shifting. The main aim of this thesis is the design and validation of experimental equipment for measuring the force effects of the shift mechanism of a mass-produced tractor in actual operation. The design of the experimental equipment is based on a study of the used measuring technique and similar experimental equipment. The final structure is selected based on selection by the method of weighted values, taking into consideration the requirements of the structure. A functional measuring chain is designed and formed for the realization of the measurement. To evaluate the data from the technical experiment, a multibody model of the designed experimental device is created in the MSC Adams View software, through which the real parameters of the shift mechanism are obtained from the measured values. The designed experimental equipment brings the possibility of complete analysis and subsequent optimization of the tractor's shift mechanism
|
|
|
Condensing steam turbine
Šikula, František ; Kracík, Petr (referee) ; Fiedler, Jan (advisor)
The topic of this thesis is a project of condensing steam turbine, which uses as an energy source heat waste from high output combustion engines. In the first part of the thesis, there is a general overview of different types of combustion engines and their thermodynamic cycles. There are also explained important features, which are essential for running of combustion engines. In the second part, there is a theoretical explanation of steam turbine. The main part of the thesis is a project of condensing steam turbine with an integrated gearbox. At first there are chosen basic conceptions, which influence the project; then there is calculated an algorithm for thermodynamic calculation for each turbine module. At the end, there is conducted a simplified calculation of a gearbox and there is also a calculation of payback period of the designed steam turbine. There are made drawings, which are all base on the previous calculations. There are drawings of sectional views of each unit and there is also a drawing of construction arrangement of steam turbine with a generator.
|
|
|
A single-speed gearbox made by 3D printing
Hykolli, Denis ; Jaroš, Aleš (referee) ; Fiala, Zdeněk (advisor)
The aim of these theses was the creation of a single-stage gearbox by additive technology FDM / FFF. By chosen values was made dimension calculation for gears. The 3D model of the gearbox was designed in 3D software Autodesk Inventor. Single parts were produced on an FDM 3D printer by Prusa Research. Manufacturing programs for parts were prepared in PrusaSlicer. These programs were used for producing individuals parts on 3D Printer. Transparent material and printing parameters for the top of the gearbox were chosen by visual test and test of light intensity. The total cost of model production is calculated in the work. The result of these is a completely working model of a single-stage gearbox with a transparent top of the gearbox.
|
|
|
Solution of Electronic Shifting for COMEX Gearbox
Crhová, Hana ; Strecker, Zbyněk (referee) ; Dvořáček, Jiří (advisor)
The subject of this barchelor's thesis is design of shifting of vehicle for handicapped people, with the emphasis on simply shifting of transmission gears. In the first part there is a comparison of Elbee with other vehicles of this category. Next part is about gearboxes divided by type of shifting. And there is comparison of these gearboxes. In the last part there is the choice of the best gearbox and construction of additional mechanism which provides correct functionality of transmission system.
|
|
| |
|
|
Reversing turbocharger
Lapáček, Martin ; Škorpík, Jiří (referee) ; Fiedler, Jan (advisor)
This diploma thesis is dedicated to a design of a reversing turbo-compressor. The thesis is divided into several parts. The introductory part includes the relevant theory and categorization of turbomachines. The second part describes the storage system the machine is designed for. A separate chapter is devoted to other examples of possible use of this machine. The next chapter provides a detail description of modes and individual parts of the machine. The most comprehensive chapter is then devoted to the design of the compressor, turbine calculation and design of integrated gearbox. The thesis also includes an annex, which contains the technical documentation.
|
|
|
Stroke mechanism of crane trolley
Galas, Radovan ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
Bachelor's thesis deals with design of stroke mechanism of crane trolley loads for the weights which do not exceed 5 000 kg. This thesis divided into written and practical sections. Written part deals with the calculation of the principal dimensions of lifting and stress control of cable reel. In this work there are also given reasons for choosing certain key parts of the lifting mechanism, such as: electric motor, gearbox, etc. Prior to the calculations in each chapter there is usually located a short introduction of the topic. The practical part contains a drawing of the complete lifting mechanism, cable reel assembly and two production drawings.
|
|
|
Freight Elevator
Málek, Ondřej ; Kozok, Zbigněv (referee) ; Škopán, Miroslav (advisor)
This diploma thesis is dealing with rebuilding of a lift with load 1000 kg into lift with load 1500 kg. This thesis is mainly intent on dimensioning of propulsion and choosing of traction means. The frame cage of a lift is counted by MKP analysis.
|
|
|
Steam turbine
Skoupý, Pavel ; Ing.Duda (referee) ; Fiedler, Jan (advisor)
The master´s thesis concentrates on a project of steam turbine with controlled extraction points destined for a communal waste incineration plant. First, there the history of devices using steam as a moving medium is introduced and than follows the description of computing program, where the calculation was running. The master´s thesis subject consists in the thermodynamic project of turbine vaning, in basic project of gearbox including the check calculations and in technical economic comparison of single shaft and twin shaft constructional design. The design documentation is worked up according to the calculated outcomes and contains longitudinal section of turbine and dispositional turbine and gearbox settlement.
|
guest ::
