|
|
Controll Electronics for Effective Supplying of Equipment with Li-Ion Accu by Solar Cells
Horký, Luděk ; Dřínovský, Jiří (referee) ; Urbanec, Tomáš (advisor)
This Bachelor`s thesis deals with questions surrounding the collection and harnessing of solar radiation for use as electrical energy. The aim of this project was to build an effective system for charging Li-Ion batteries by means of solar cells. To this end, four different solar panels currently available were chosen for measuring and evaluation. The most suitable of these was chosen and an electronic control system devised for effectively supplying the Li-Ion batteries. It was necessarily to make solution for problems consequent upont this method of charging this type of battery and make practise realizitaion of this electrical scheme by SMT technology.
|
|
|
Optical network design
Polaček, Adam ; Tomašov, Adrián (referee) ; Horváth, Tomáš (advisor)
This bachelor thesis deals with the design of a technological optical network for the area of Hradec Králové, for the company ČEZD Distribuce. The theoretical part of the thesis describes the current network design and discusses network protocols. The practical part of the thesis describes the passive part and the logical part of the network. An important part of the thesis, is the fiber scheme and configuration design for router and switch. In the last part of the thesis, simulation in GNS-3 program is shown.
|
|
|
CACHE Memory Design for Network Applications
Soľanka, Lukáš ; Martínek, Tomáš (referee) ; Kořenek, Jan (advisor)
This thesis deals with design and implementation of generic cache memory for a wide range of network applications. Firstly, aspects with influence on performance are discussed. Then architecture is proposed and implemented with respect to the given technology. The main selectable parameters of the design are: data path width, line size, associativity, number of lines and replacement policy. Cache is also pipelined and therefore is able to process one request for reading or writing every clock cycle. The resulting component has been thoroughly simulated to verify its functionality and finally, its operation has also been tested in hardware on the Combo6X board.
|
|
|
User and Device Metadata Collection from the Darkweb
Gula, Ján ; Matoušek, Petr (referee) ; Veselý, Vladimír (advisor)
This bachelor's thesis solves the problem of anonymization on the Internet, that is widely used for dealing with illegal substances. This problem drives law enforcement agencies to be interested in web pages that represent markets with forbidden content which are hidden behind anonymity networks. My goal is to focus on the biggest markets with such content and to gather as much information as possible about subjects that posture on similar types of web pages either as sellers or as buyers. I have resolved the given problem by choosing the most impactful markets according to the number of users signed in. I have become one of the users and applied algorithms for data scraping to get information from web pages into a structured form that is more suitable for a deeper analysis. The results of this thesis will help law enforcement agencies with the analysis of metadata of users that commit illegal activities as they will not have to manually search through the illegal markets, and they will have all available data summed up in a structured form in a database. Unifying data into a structured form will help speeding up the investigation and address the biggest drug sellers.
|
|
|
Optical Convertors
Chleboun, Jan ; Dostál, Otto (referee) ; Filka, Miloslav (advisor)
Optical converters are used in various types of optical networks to provide end-users of data and voice services and also allow reception of television broadcasting, which is transmitted through optical media. The current trend is the construction of FTTH networks (Fiber To The Home), which, thanks to optical fibre, have reduced the speed or capacity, as in the case with metallic networks. The proposal is the need to consider positive and negative factors associated with building of concrete network with a specified number of users and location. Each network consists of passive and active components. Passive can be used for transmission of information, therefore they are mainly elements transmission medium. Active part includes elements for sending and receiving information transmitted by optical media. Transmitters vary their technical implementation, quality and reliability. This obviously affects the price of both active and passive parts. The cost of the operation of the network are also increased with demands of control. The advantage is the efficient management, which is guaranteed by return of the cost to build a FTTH network. Optical network with a system of remote management converters is a new trend of optical communications.
|
|
|
HW and SW for Ethernet-to-IEEE802.15.4 bridge
Růžička, Tomáš ; Štohl, Radek (referee) ; Fiedler, Petr (advisor)
In this work we deal with the converter, to serve as a bridge between the two protocols. These protocols are Ethernet and wireless IEEE 802.15.4 protocol. Wireless part of this work, however, I simulated via serial RS 232nd After Ehternetu can send data via TCP or UPD protocol. First is the need for a converter to connect to the network and then create a packet. Finally, it is necessary to also address the views received and sent data via Ethernet and the RS-232.
|
|
|
Evaluation of entropy sources in common computers
Bafrnec, Matúš ; Zeman, Václav (referee) ; Burda, Karel (advisor)
This thesis is focused on entropy sources and their evaluation. It includes a brief introduction to the information theory, description of entropy sources, their parameters and characteristics and methods of evaluation based on the NIST organisation standard SP 800-90B. The following part of the thesis is dedicated to the description of two created programs and evaluation and comparison of entropy sources. Additionally, the last part describes the usage of hash functions in association with entropy sources.
|
|
|
Project documentation for the design of data networks
Gajdošík, Ivo ; Mišurec, Jiří (referee) ; Mrákava, Petr (advisor)
This Master’s thesis deals with project of blueprints for installation of data cabling in specific building following regulations. Theoretical part describes basic overview of used regulations and principles of data networks with focus on Ethernet and Wi-Fi standards. Separated chapters cover passive layer of data networks and computer-aided-design. Practical part contains implementational and architectural drawing of data network project in multipurpose building. According to these plans the project could be realized.
|
|
|
Management and Monitoring System for Computer Lab
Kudláček, Marek ; Zeman, Kryštof (referee) ; Mašek, Pavel (advisor)
This master's thesis deals with a system for PC mass management and monitoring. There is a brief description of Puppet, Chef and Ansible, which are tools enabling this functionality. The overall system issues are solved by Ansible. This thesis also includes a script created for a classroom’s remote management according to a beforehand fixed assignment. The system enables remote installation and configuration of applications, creation of users, editing the files, update of the system and many more. A web application was created for this system. Through this application, the system can be controlled via web browser, both from local and public network. Practical examples of the issue dealt with is also part of the thesis.
|
|
|
Secure Network Based on Virtual Next-Generation Firewall
Varmus, Pavol ; Burda, Karel (referee) ; Malina, Lukáš (advisor)
The bachelors thesis aims to study the issue of security of the networks that use firewalls. The next goal is to evaluate the characteristics of a different types of firewalls and to summarize its results. The other object is to design a small or medium sized network with description of best practice. The main objective of the thesis is to design a lecture task for students to test with a step-by-step solution. This task is for students to undertand the importance of firewalls as a network protection service tools and to try out different types of filters for maintainin network security. The task ends with a practical stress test made by a network attack in order to see its resistance to the attack.
|
guest ::
