|
|
Multifunctional Building
Marášek, Martin ; Myslín, Jiří (referee) ; Maceková, Věra (advisor)
The diploma thesis deals with design documentation of a multifunctional building. The new building is located in a town Uherský Brod in Uherské Hradiště district. The house is situated on a gentle sloping land. The new building is divided into café, drugstore and eight flats. The masonry are designed from Porotherm system. The roof is warm flat roof.
|
|
|
Multifunctional house
Blaha, Ondřej ; Janík, Zdeněk (referee) ; Kalousek, Miloš (advisor)
This final thesis deals with a project documentation of a new multifunctional building. The building is located in Žďár nad Sázavou, in the Neumannova street. The building is divided into residential units and areas for a small company and a shop. The house is projected as a detached building with a partial basement and three floors. The residential part has 8 apartments in total – four apartments with three bedrooms, one with two bedrooms and three with one bedroom. It includes also cellars belonging to the apartments. The non-residential part includes space for a shop and an administrative part consisting of a reception, a meeting room, offices, stores and sanitary facilities. The main entrance in to the residential part is located on the level of staircase half landing. Main entrances into the non-residential parts are on the level of the ground floor. The house dispose with 24 parking places, two of them are dedicated for drivers with disabled parking permit. The building is based on concrete strip foundations. The external load-bearing structures are walled with clay masonry in the floors and with permanent formwork in the basement. The ceiling structure is formed with prestressed floor slabs. The house is covered with a warm flat roof. The staircase is pre-fabricated. In the thesis, there was put a stress on the appropriate dispositional, structural, technical and architectural design and on the safety in the use of the building. The drawing documentation is processed in the AutoCAD.
|
|
|
The building
Kříž, Lukáš ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The subject of the diploma thesis is to prepare project documentation for the construction of a multifunctional building with almost zero energy consumption. The multifunctional building is located in the South Moravian Region on the outskirts of Rosice. It is a five-storey detached multifunctional building in a slightly sloping terrain, with one underground floor and four above-ground floors. The underground floor serves for the most part as a collective garage and also for the technical background of the building. There is a gym and showroom on the first floor. On the second and third floors there are office spaces with the necessary facilities. The remaining fourth floors are used for living, there are designed four residential units, with storage space for each apartment. The building is designed as a combined construction system, while the perimeter vertical load-bearing structures are lined with ceramic hollow blocks. The perimeter load-bearing walls in the basement are made of lost formwork. The vertical load-bearing structures inside the building consist mainly of reinforced concrete monolithic columns. The ceiling structures and longitudinal girders are also monolithic reinforced concrete. The perimeter masonry is insulated with the ETICS contact thermal insulation system. The building is based on reinforced concrete monolithic foundation strips. The roof consists of a flat single-skin vegetation roof.
|
|
|
Air-conditioning of Department store
Chorý, Vojtěch ; Rubina,, Aleš (referee) ; Rubinová, Olga (advisor)
The topic of this bachelor thesis is design of air-condition equipment for veterinary clinic. The clinic is located on the first floor of a multifunctional building in Brno city. For design purposes is used warm-air heating, air-conditioning and forced air-replacement. The theoretical part is focused on clean room issue. The Project part contains a project documentation for realization of two air-conditioning equipment. The first air-conditioning equipment is designed for warm-air heating and air-conditionig of clean rooms. The second air-conditioning equipment provides forcer air-replacement of the clinic.
|
|
|
Multifuntional house
Melenovský, Jan ; Burianová, Lenka (referee) ; Smolka, Radim (advisor)
The thesis deals with a Polyfunctional house. It´s lately erected building of self-standing block of flats with a pizzeria situated in Humpolec, Hradská Street. The building is designed as a four-storeyed cellarless house with eight separate housing units for thirty permanently living people. The pizzeria designed for thirty guests and five employees is included to the property. It´s situated in the firtst floor. Residential part and business premises are separated from each other operationally independent and accessible main entrance. The building is covered with a flat roof structures. The building plan uses load-bearing vertical structure of ceramic system Porotherm, horizontal structure consists of prestressed and reinforced concrete panels Spiroll board.
|
|
|
Multifunctional Building on the Embankment in Přerov
Čechák, Tomáš ; Kalivoda, Tomáš (referee) ; Kalousek, Lubor (advisor)
Diploma thesis is focused on multifunctional building on the embankment in Přerov. The building has four aboveground floors. Multifunctional building is situated on the bank of the Bečva river with the view over the historic city centre of Přerov. Main mass of surrounding block is formed by Sokolovna built in functionalist style. Intention is to connect old block with new multifunctional building in minimalistic style. First floor will have three shopping units and technical facilities. Second and third floors will be used for living and administration. Living and administration parts will be separated in the layout of the building. Fourth floor will be used for living.
|
|
|
Multifunctional building
Svoboda, Tomáš ; Pospíšil, Tomáš (referee) ; Pěnčík, Jan (advisor)
This is a detached multifunctional building in the construction of commercial and residential buildings. The building is located in České Budějovice. Multifunctional building has five floors, one underground floor and a partial basement. The building is covered single-surface vegetation and double skin roof rack. On the first floor is a multifunctional building with reception vestibule, hall of which are accessible to all businesses and also the staircase space. The first floor is also a cafe, spatially separated from the multifunctional building. The café includes restrooms and stairs to get to the hinterland own cafe, where there is room for staff, toilet and are relevant warehouses drinks and other amenities. On the second floor there is a fitness center with all facilities and sanitary facilities. The gym also includes a reception and a health food store. In the third to fifth floor are residential units. A total of 5 apartments, where 2 and 3 flats are always identical. The building is based on foundation strips of plain concrete and masonry made of POROTHERM building system with a contact system of the company ISOVER. The project has been prepared complete documentation of new multifunctional building at the level of documentation for construction. Design of the building emphasizes the static and layout, fire safety, energy savings and safety in use. Drawing documentation was realized in ArchiCAD.
|
|
|
Multifunctional building Litomyšl
Kovář, Lukáš ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
Diploma thesis deals with the design of the multifunctional building located between Havlickova and F. Vogner streets in relation to the existing building in Litomyšl. Building plot is slightly sloping, at the rear goes into greater inclination. The building has four aboveground floors and one underground floor. The building includes services, located in ground floor, administrative premises decomposing in the second and third floor and apartments on the top floor. In the basement are located parking spaces. Supporting skeleton of the building is a cast-in-place concrete frame. Roofs are designed as a flat single shell. In part of roof over third floor is a green roof. The building is founded on piles. Due to the occurrence of water pressure is building an extra solved waterproofing system with checks and activation. The work includes text messages, drawings for building construction, fire safety design, construction and physical assessment of building structures and specialization from concrete structures.
|
|
|
Multifunctional building
Filipčík, Martin ; Spáčil, Miroslav (referee) ; Sedláková, Markéta (advisor)
The aim of the diploma thesis is composition of project documentation for construction of multifunctional building. Object is situated on the cadastral area of Třebíč in the location Na kopcích on the eastern part of city. Terain is slightly sloping. In the multifunctional bulding there are four above-ground floor and one below-ground floor. In the below-ground floor there are situated technical and storage spaces. In the first below-ground floor there are two entrances, the first one for administrative part and second one for residential part. The first and second above-ground floor is used for administrative purposes. The third and fourth above-ground floor is used for living in flats. Above part of the third above-ground floor there is roof made of extensive green roof and above the fourth above-ground floor there is roof made of a flat roof with a classical order of layers with waterproofing layer made of PCV-P. There is a lift in the part of object with flats. The vertical construction system of the building is wall-mounted, supplemented with girders and columns. The ceiling structures are made of reinforced concrete monolithic slabs. The staircase is monolithic reinforced concrete.
|
|
|
Meatpacking plant
Majtán, Marián ; Procházka, Martin (referee) ; Sobotka, Jindřich (advisor)
The diploma thesis is focused on project documentation of Meat packing plant. Along with meat processing the documentation solve question of accomodation for employees. Building consists of two main sections: The processing – it is structured under requierements of meat packing industry. Second one is residential part set in 2nd, 3rd and 4th floor. Main inspiration for design are meat packing plants in Scandinavian countries, where is often need to provide accomodation to employess because of disadvantageous geographic locality. Building is built of Heluz building system, perimeter walls consists of insulation filled blocks. Building is without basement and it is based on footings of plaint. The roof is flat, partially designed as extensive green roof. Isover system is used to thermal insulation. A part of object is also asphalted plain for transport goods to and from the meat packing plant.
|
guest ::
