|
|
Cast-in-place tank of sewage plant
Čožík, Martin ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The thesis deals with the design and assessment of monolithic reinforced concrete structures tanks and wastewater treatment plants in accordance with applicable standards and drafting drawings. The tank is divided into individual solved parts: base plate, walls and ceiling plate. These parts are designed according to the ultimate limit states and serviceability. Resolves an assessment of the foundation structure according to the second geotechnical categories.
|
|
|
Survey and Diagnostics of Building Construction
Řezáč, David ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
The diploma thesis deals with the construction and technical survey of a reinforced concrete structure. The theoretical part describes the tested properties of concrete and the methodology of their tests used in the practical part. The practical part is devoted to the diagnosis of the existing structure, which was determined the strength of concrete using core holes, concrete adhesion by tear tests, and reinforcement of reinforced concrete elements of the structure determined by ground-penetrating radar, electromagnetic indicators and additional chopped probes.
|
|
|
The Block of Flats in Brno, Bystrc - Project Planning and Management
Šarlejová, Petra ; Štěrba, Martin (referee) ; Motyčka, Vít (advisor)
This thesis deals with the project planning and management of the construction of two houses of flats in Brno – Bystrc, Šemberova street. The houses of flats are designed as a newly built five floors above ground and one basement floor. The supporting system is made from brick ceramic blocks, underground floor is made of concrete blocks. This thesis processes technological project of building as preparation and building site equipment, use of machines necessary for implementation of the construction, monitoring and test plan, technological steps for basement walls of shuttering blocks. Finally, in this thesis dealt with time and cost of construction of houses of flats.
|
|
|
Residential building
Šeps, Daniel ; Bartlová, Jana (referee) ; Vajkay, František (advisor)
The subject of the bachelor thesis is the design of a new building of a detached apartment building in Nová Paka in the form of project documentation for construction. The buiding is designed brick with reinforced concrete ceilings. Perimeter walls on the 1st – 3rd floor is designed ceramic brick blocks th. 300 mm with contact thermal insulation system ETICS th. 200mm, which will be equipped with silicone plaster 1,5mm. Perimeter walls on the underground floor is designed permanent shuttering DITTON 30 th. 300mm, filled with concrete C20/25 XC1 and by steel B500B insulated with extruded polystyrene XPS th. 160mm. Internal load-bearing masonry wall is designed with acoustic ceramic brick blocks th. 250 mm. Partitions are designed from acoustic partition walls. On the ceilings is a hardwood flooring because of excellent acoustic characteristics. The roof is designed as a flat green roof with extensive vegetation and with thermal isolation of minera wool and with waterproofing layer made of bituminous modified SBS strips laid in two layers. Balcony railing is designed aluminous with safety glass paneling.
|
|
|
The building, Přístavní street, Praha 7
Degr, Luboš ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The subject of this Diploma Thesis is newly built polyfunctional building in the Prague – Holešovice. Building land is slightly sloping. The building will be followed by the surrounding buildings. The building consists of seven floors. The floor underground technical spaces and collective garages. On the ground floor are two commercial spaces and reception. In the second to fifth floor are office space. The top floor is a penthouse with terraces. The building is designed as a monolithic reinforced concrete skeleton accompanied by a facade wall and the wall forming the core. The core consists of a elevator and a staircase. Floor slabs is continuous reinforced concrete slab with capitals. The façade of the building is divided by pilasters, stone cladding. Root at the penthouse is composed of a terrace with vegetation. Ground floor consists of shop windows with sun screens. All designs are in accordance to the valid ČSN code.
|
|
|
Roof structure of construction for social purposes
Bašista, Ján ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The work treats the static recalculation of an existing roof structure of a construction for social purposes and proposes two variants of the design of a new roof structure. The construction has a rectangular ground plan of 30 m x 47 m and the roof structure is placed on the load bearing circumference concrete walls. Except for the load constituted by the function of the construction and by the climatic area, an extra load of 2 tons suspended at any place of the structure is considered because of the special requirement of working and technological equipment. The variant no. 1 is designed from the steel S355. The variant no. 2 is designed as a combination of the wood GL24h and the aluminium EN-AW 5083. Both of the variants have 11 transverse load bearing girders. The purlins are perpendicular to the girders and are placed on them. Stiffness is secured by roof stiffeners.
|
|
|
Design of the Flat Plate Slab
Krejčová, Jana ; Šulák,, Pavel (referee) ; Švaříčková, Ivana (advisor)
Bachelor thesis describes the design and assessment of monolithic concrete, locally supported roof structures of parking place and ramp, elaboration of shape and reinforcemenet drawings of selected structural element. The work also includes the teoretical part dealing with measures for buildings located in the gap. Calculation of internal forces was performed by komputer program SCIA Engineer in two different models. It was control by simplified method of summary moments and results were compared.
|
|
|
Project
Malý, Martin ; Kratochvílová, Erika (referee) ; Šlanhof, Jiří (advisor)
The aim of this work is the processing of the technological project for the ,,Skladová hala v Měříně“, which addresses the preparation and organization of construction. Construction technology the project involves the processing of time plans, economic evaluation, design of pumping sources for construction, working procedures, construction site equipment, and design of major machines and mechanisms. Further, it is processed a detailed technological regulation and inspection and test plan for a prefabricated reinforced concrete skeleton. All technological procedures are processed with regard to work safety and environment.
|
|
|
Cable-supported bridge
Adler, Filip ; Glovina, Filip (referee) ; Nečas, Radim (advisor)
The subject of this master thesis is to design a pedestrian bridge supported by cables. There are three variants of studies created for this case and for most suitable one, all documentations were produced. The primary focus of this work is on static design solution with an output of several drawings. Static model for results from load cases included construction stages and was created in Midas Civil. Design and checks were performed by hand calculations, complemented by checks of several sections by IDEA StatiCa software. Analysis and calculations are compliant to up-to-date codes and respect the fundamentals of analysis due to limit states.
|
|
|
Preparation for the construction of an apartment building in Brno - Slatina
Těžký, Filip ; Doubek, Rostislav (referee) ; Kantová, Radka (advisor)
The diploma thesis deals with the building - technological project of the apartment house in Brno - Slatina, Lučiny. The purpose will be an optimal design of construction progress with regard to finance and time. For this phase were processed the site equipment with the design of the lifting strap, the transport routes and the machine assembly. In addition, an item budget, which was followed by a detailed schedule. Based on these documents was created a balance of machines and workers. For monolithic constructions were developed a technological regulation and a control and test plan. Furthermore, the calculation of the decanting time and the design of the formwork turnover, supplemented by its drawing. In the diploma thesis is elaborated a plan for safety and health protection in the workplace and selected design details.
|
guest ::
