|
|
Generic logic analyzer
Tajč, Martin ; Povalač, Karel (referee) ; Kubíček, Michal (advisor)
The aim of the project is to design a generic logic analyzer based on an FPGA. The analyzer should be able to analyze protocols such as I2C, SPI, RS232, RS485 and GPIO. The captured data can be observed using an embedded graphical display or using a PC. The PC can be used to control the analyzer and to save the captured data. The thesis is divided into several parts. First, the basic structure of the analyzer is described including detailed description of its particular components. Later on, the most common protocols that can be decoded using the analyzer are described. Finally, the FPGA subsystem and microcontroller application are presented together with corresponding source codes.
|
|
| |
|
|
Emulator of 3.5" diskette drive using RS232 and SD memory card
Sedláček, David ; Hanák, Pavel (referee) ; Pavelka, Ondřej (advisor)
This thesis deals with the design of the 3,5" floppy drive emulator with ATMEGA microprocessor unit. The emulator has been designed according to the principles of designing electronic devices, there is also object-control application and firmware for a microcontroller, which supports MFM coding. The thesis also lists all the formats of data stored or transmitted along with some flowcharts.
|
|
| |
|
|
Software for Communication with GPS Receiver
Vrba, Pavol ; Daněček, Vít (referee) ; Číž, Radim (advisor)
The main goal of this master’s thesis is to over study, reconsider and make a program, which will be capable to interpose information from GPS module, different markers and necessary information’s, geographic coordinates obtained from GPS will be projected in its interface and also on map. This project contains of 3 parts. The first one exactly describes GPS, its history, structure, principle, competitive types of navigations systems and also GPS’ services and technical parameters. The second part of this project describes GPS hardware, used receiver of this signal. There is also mentioned its technical parameters and communication with outside world. The third part is in scripted the software for communication with GPS receiver. We can also see the description of code, in which is mentioned communication protocol and imaging the position on the map. It was programmed in C# language on platform Microsoft Visual Studio 2008 Express Edition.
|
|
|
Software for Communication with GPS Receiver
Vrba, Pavol ; Daněček, Vít (referee) ; Číž, Radim (advisor)
The main goal of this master’s thesis is to over study, reconsider and make a program, which will be capable to interpose information from GPS module, different markers and necessary information’s, geographic coordinates obtained from GPS will be projected in its interface and also on map. This project contains of 3 parts. The first one exactly describes GPS, its history, structure, principle, competitive types of navigations systems and also GPS’ services and technical parameters. The second part of this project describes GPS hardware, used receiver of this signal. There is also mentioned its technical parameters and communication with outside world. The third part is in scripted the software for communication with GPS receiver. We can also see the description of code, in which is mentioned communication protocol and imaging the position on the map. It was programmed in C# language on platform Microsoft Visual Studio 2008 Express Edition.
|
|
|
Multiple-funktion steering wheel Formule Student
Paulus, Luboš ; Štohl, Radek (referee) ; Havlíková, Marie (advisor)
The Master‘s thesis deals with a creating of display writers on multiple-function steering wheel Formule Student. It is mainly about dates transfered through RS232 or CAN bus from control unit of the Formule to microcontroller. First of all it is necessary to find out, which informations and a which way of displaying them are more useful and readable for drivers. This leads to another point - right choice of display writers, which will be used on the steering wheel. Creation of the design and construction of display device follows.
|
|
|
Electronically controllable frequency filters with current active elements
Suchánek, Tomáš ; Lattenberg, Ivo (referee) ; Kubánek, David (advisor)
The aim of the thesis is to study the possibilities of the electronic frequency ?lter com- posed of active elements operating in current mode. The main opportunities lie in the change control parameters, most are marginal or quality factor frequency. As the active elements are considered especially CC (Current Convejor), controllable current ampli?er DACA (Digitally Adjustable Current Ampli?er) or combination with the current tracker MO-CF (Multiple Output Current Follower). Another part will focus on the management of the above parameters using digital potentiometers and choosing the appropriate ?lter structure. The ?nal task was to digital control parameters using a PC and measuring its properties.
|
|
| |
|
|
Software for Communication with GPS Receiver
Vrba, Pavol ; Daněček, Vít (referee) ; Číž, Radim (advisor)
The main goal of this master’s thesis is to over study, reconsider and make a program, which will be capable to interpose information from GPS module, different markers and necessary information’s, geographic coordinates obtained from GPS will be projected in its interface and also on map. This project contains of 3 parts. The first one exactly describes GPS, its history, structure, principle, competitive types of navigations systems and also GPS’ services and technical parameters. The second part of this project describes GPS hardware, used receiver of this signal. There is also mentioned its technical parameters and communication with outside world. The third part is in scripted the software for communication with GPS receiver. We can also see the description of code, in which is mentioned communication protocol and imaging the position on the map. It was programmed in C# language on platform Microsoft Visual Studio 2008 Express Edition.
|
guest ::
