|
Design of hydrogen jet engine to 1kN thrust
Mikulenka, Karel ; Šnajdárek, Ladislav (referee) ; Škorpík, Jiří (advisor)
This thesis includes a brief history of jet engines using hydrogen as fuel. Calculation of thermodynamics of small engine with thrust up to 1 kN which is in modern day used in practice drones or ballistic missiles will be conducted. Given initial parameters compressor selected is of radial type. Calculation of radial compressor and its verification in EES software. Issue of combustion chambers is presented and calculation of chamber balance is carried out. Computation of turbine and blading layout. Proposal of jet for expansion into atmosphere and engine thrust. Comparison of contemporary projects researching hydrogen propulsion in aerospace with their conventional counterparts and assessing their feasibility compared to other types of renewable fuels.
|
|
Model identification and measurement of parameters of model turbine JetCAT
Tlustoš, Jiří ; Dolák, Petr (referee) ; Klusáček, Stanislav (advisor)
The bachelor's thesis deals with measurement of microturbine engine parameters. The first part of the thesis covers theory of microturbine parameters measurement, data analysis, interpretation and utilization for model identification, engine control, individual functional block charts and characteristics generation. All possible methods for engine parameters measurement, sensors selection and installation, data acquisition are analyzed here. The focus is on the engine air flow measurement. Selected method of the air flow measurement is described here in detail and verified for the specific case. The Calibration was carried out by means of measuring route with continuous air flow adjustment. In the final part is concept evaluation and recommendation for air flow measurement in the real application on the model turbine JetCAT.
|
| |
|
Methodology of temperature measurement behind jet engine
Koutný, Martin ; Koštial, Rostislav (referee) ; Matějů, Jiří (advisor)
This thesis is focused on temperature measurement behind jet engine. The theoretical part introduces chosen ways of temperature measurement. The practical part is divided into design (and later assembly) of the measuring stand, methodology of measurement and the measurement itself. The main outcome are heat maps gained by measuring temperatures behind TJ – 42 jet engine.
|
|
Design VUT 022 Aircraft with Jet Engine according to CS-22 Regulation
Matěják, Vladimír ; Popela, Robert (referee) ; Juračka, Jaroslav (advisor)
The diploma thesis deals with the design, load calculation and stress analysis of a composite wing construction of an airplane based on the construction of the airplane VUT 001 Marabu in order to fulfil conditions of CS-22 specifications. As a part of the thesis are basic mass, moment and aerodynamic characteristic of the airplane analyzed. Also the modification of the center part of the fuselage is designed in order to enable a jet engine instalation inside the construction.
|
| |
|
Design of coaxial high-speed gear reducer
Neklapil, Libor ; Ing. Tomáš Hubáček, Ph.D (referee) ; Bradáč, František (advisor)
The thesis deal with design of coaxial high-speed gear box for small-scale turboshaft engines. At the beginning a study of problems was performed and for design concept was elected version of single-shaft turbo-engine with electric generator. Kinematic diagram, type of gear design, material and lubrication method was designed. Further was solved proposal of basic gearing parameters, choice of the number of tooth and basic proposal calculations were performed. Was performed check calculation of gearing, calculation of bearings durability and was processed design documentation in required range. Designed gear reducer has two stage with three coutershafts, that are deployed evenly about main axis of reducer. First stage is gear with external gearing, second stage with internal gearing. The thesis may be used as a template for next similar gear reducers design.
|
|
Trends in aviation jet engines development
Fiala, Luboš ; Klement, Josef (referee) ; Šplíchal, Miroslav (advisor)
The aim of the bachelor work is to summarize recent developments in aviation jet engines. This development is oriented to reduce fuel consumption and improve thermal and propulsive efficiency. Principles described in this work are based primarily on development programs ACARE, Vision 2020 and VITAL. Projects are under development and some are already at the stage of flight tests.
|
| |
|
Maintenance of jet engines
Drápal, Stanislav ; Koštial, Rostislav (referee) ; Šplíchal, Miroslav (advisor)
This bachelor thesis relates to the problematic of jet engine maintenance. In the first part the reader is introduced to the historic context and functionality of the jet engine as well as to the various types of this engine. The second part relates to the problematic of maintenance, shows and compares different concepts and shows modern trends in this field. The last part is based on my visit in Letecké opravny Malešice, and shows practical methods used during overhauls of jet engines.
|