|
|
Forging of the "lock-bolt"
Frýdl, Pavel ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor)
To lock-bolt manufacturing was selected technology of die forging. Lock-bolt is made of 11375 steel in a series of 2700 pieces per year. With the use of literary studies and practical knowledge has been developed technological process fittings. It includes the draft instrument stainless steel 19663 including drawings. Forging is performed on a hydraulic-pneumatic hammer KJH 2 with a nominal value of 20 kJ impact work. Blanks are cut from bars 30 mm 6 m long to bars 52.2 mm long. The techno-economic evaluation shows that the price of a forging is 4,71 CZK and for production will be need 24 pieces of bars.
|
|
|
Precision forging
Berka, Martin ; Peterková, Eva (referee) ; Lidmila, Zdeněk (advisor)
This bachelor´s thesis deals with the technology of precision forging. The thesis describes basic distribution of the forging according to the nature of the material flow and his procedure. After the introductory part this thesis deals with the analysis of the methods of the drop forging with fin groove. The next section contains a description, parameters and methods of precision forging. Technical a economical evaluation of the component technology is as a conclusion of the thesis.
|
|
|
Precision forging
Bužga, Petr ; Peterková, Eva (referee) ; Lidmila, Zdeněk (advisor)
The thesis deals with methods, procedures and possibilities of precision forging. After the initial analysis methods of die forging with collar also comprises an overview, analysis and description of methods of precision forging, including a technological evaluation in view of technical possibilities, investment requirements and expected benefits. The main emphasis is laid on the technological conditions, procedure, on the construction of the dies and forging devices.
|
|
|
Production of forging piece "Spanner"
Vávra, Jan ; Kopřiva, Miloslav (referee) ; Novotný, Karel (advisor)
Projects developed within the bachelor's degree in Mechanical Engineering, presented a proposal technology forged wrench - the hot-rolled steel bars 11 523.0. The thesis also compares the past with conventional methods of production and considering the new technological process of manufacturing. Based on the literature studies about fitting and calculations, was chosen to die forging hammer KHZ 2 A (producer ŠMERAL Brno, plant Hronov), with nominal energy of 20 kJ working pressure of 16 MPa and 30 kW electric power.
|
|
| |
|
|
Production of forging piece "Spanner"
Vávra, Jan ; Kopřiva, Miloslav (referee) ; Novotný, Karel (advisor)
Projects developed within the bachelor's degree in Mechanical Engineering, presented a proposal technology forged wrench - the hot-rolled steel bars 11 523.0. The thesis also compares the past with conventional methods of production and considering the new technological process of manufacturing. Based on the literature studies about fitting and calculations, was chosen to die forging hammer KHZ 2 A (producer ŠMERAL Brno, plant Hronov), with nominal energy of 20 kJ working pressure of 16 MPa and 30 kW electric power.
|
|
|
Sheet metal part manufacturing by drawing
Moravec, Jiří ; Podaný, Kamil (referee) ; Peterková, Eva (advisor)
The project developed in the frame of the bachelor study branch B2307-00 presents a proposal of acreation technology of a flange, which is to be a model of the roof lift. The part is made of steel 11 320. Due to the anticipated serial production of 10 000 pieces per year, a number of production options is considered. On the basis of literary studies of the issue of drawing, it is suggested a drawing by a metal tool with blankholder. Due to calculations of tensile strength and work, press LEN 40 C is suggested. Drawing tool is designed to require the most of standard components and is solved through the form of a normal rack fastened to the eccentric press LTN 40 C. Drawing punch and drawing die are made of tool steels 19 436.3 and heat-processed according to the drawing documentation.
|
|
| |
|
|
Forming Technology of Thin Sheets
Musil, Zbyněk ; Žák, Ladislav (referee) ; Dvořák, Milan (advisor)
This bachelor‘s thesis deals with technology of mechanical working of the sheetmetals by cutting for rotary and non-rotary single parts. The first part deal with common dissertation about surface mechanical working, mainly about cutting and meaning of cutting gap in accordance with final cutting. The second part deals with transfer of the new pieces of knowledge from foreign technical literature of surface mechanical working. In the last part there is done an aplication on the particular component.
|
|
|
Injection moulding
Heralt, Aleš ; Balej, Zdeněk (referee) ; Žák, Ladislav (advisor)
This Bachelor´s thesis is focused on construction forms for injection of thermoplastic matters. The technology for plastic products production is technology that participate more and more in production of all sorts of products - from technical components over kitchenware after as much as toys. Main part of this thesis is focused on description of the injection valve, ejector, annealing and ventilation system forms for injection with the main structural principles.
|
guest ::
