|
|
Roofing of the winter stadium
Kašpír, Filip ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
The subject of this bachelor thesis is the design and assessment of a steel roof structure of the winter stadium in the city of Olomouc. The new layout solution takes into account the current dimensions of the stadium. Ground plan dimensions of the structure are 101x73 m with the maximum height of 30.5 m. The main load-bearing part of the roof structure is represented by a truss, which has the shape of an arch. The arch is latticed. With an axial distance of the upper and the lower belt of 3.0 m and axial distance of the trusses of 5.0 m. Spatial rigidity is ensured in the transverse and longitudinal directions by stiffeners, which are distributed symmetrically. The bachelor thesis contains a static calculation of purlins, truss, gable wall and of joints. The whole roof structure is then clad with panels.
|
|
|
Steel structure of sport hall in Brno
Jedzoková, Patricie ; Horáček, Martin (referee) ; Balázs, Ivan (advisor)
The thesis deals with the design and structural assessment of the steel structure of sports hall in Brno. The dimensions of a floor plan are 35x78 m and height 15,4 m. The structure consists of fourteen main trusses, the distance between them is 6 m. They consists of arched trusses, which are pin-supported by fixed columns. The main trusses are connected by purlins and girts. The spatial ridity of the structure is ensured by transversal bracings and longitudinal bracings. Kingspan panels are utilize fot the structure cladding.
|
|
|
Load-bearing structure of sport hall
Králíček, Jiří ; Pešek, Ondřej (referee) ; Balázs, Ivan (advisor)
The aim of the master thesis is design and check the timber construction of the sports hall in two variants. The first variant is a frame, which is formed by three steel columns. The roof structure is made from timber trusses, which is pin-supported beam above both fields. The second variant is a frame, which is formed by three steel-concrete columns. The roof structure is made from timber glulam beam of saddle shape, which is continuous over both fields. Spatial rigidity of the structure is ensured by steel bars. The second variant is calculated in detail by hand and the structure drawings are attached. Input static models and auxiliary static models were created in SCIA Engineer 18.1.
|
|
|
Steel Structure of the Technology Building
Paroulek, Adam ; Pilgr, Milan (referee) ; Brosch, Petr (advisor)
The diploma thesis deals with the design of a steel technological structure in the locality of Štětí. The struture is used for the paper production technology. The geometry of the structure was customized to technological requests. The statistic system was considered in two versions – joint connections and frame – joint connections. The frame – joint connections system was chosen for detail processing. The steel structure was calculated by Scia Engineer 19 software. The connections were calculated by Idea statica software. The thesis is processed according to valid standars of ČSN EN.
|
|
|
Shopping gallery
Lorenc, Jakub ; Barnat, Jan (referee) ; Pilgr, Milan (advisor)
The subject of this diploma thesis is the design and assessment of main load-bearing elements od the steel structure of shopping gallery in Hodonín. Part of floor plan is rectangular and rest of it is half-circled. Object's dimensions are 7é m x 147,75 m (and roof overhang 1,5 m on each side), the height of the ridge is 13,43 m and the height of the roof's dome is 22,70 m. It's a two-storey building. The load-bearing structure consist of pin-suported columns, in this case there is max. 8,5 m distance between them in direction of main frame. The distance between main frames is 9 m. The spatial rigidity of the structure is ensured with floor slabs and system of bracings. The cladding consists of sandwich panels, roof's fanlights and dome of glazed areas. Most of elements are made of S355 steel.
|
|
|
Multi-storey building
Zaikin, Danil ; Bajer, Miroslav (referee) ; Bukovská, Pavla (advisor)
The subject of the thesis was the design of a multi-storey office building. In the transverse direction the building was designed as a three-tract 6.0 + 4.0 + 6.0 = 16 m. In the longitudinal direction 9x6.6 m = 59.4 m. The design was designed in several variants: articulated and frame in transverse directions. The joint variant was selected for detailed analysis.
|
|
|
Multifunctional Sports Hall
Mika, Václav ; Balázs, Ivan (referee) ; Horáček, Martin (advisor)
The bachelor thesis deals with design and structural assement of the steel multifunctional sports hall in Přerov. The dimensions of the rectangular floor plan are 34 x 61 m and the height is 13 m. Its main frame is created of cylindrical truss and columns. The distance of each cross links is 6 m. Single main frames are mutually connected with purlins and girts and the spatial rigidity of the structure is provided by sway bracings and longitudinal bracings.
|
|
|
Steel construction of the sports hall
Drahokoupilová, Nikola ; Šmak, Milan (referee) ; Štrba, Michal (advisor)
The subject of this thesis is the design and assessment of steel sports hall in the town of Krnov. The main structural material is steel S355JR. The ground plan dimensions of the object is 48,0 metres to 36,0 metres, the height of the object is 16,78 metres. There is a sport facilities unit adjusted to the construction . The dimension of such an object is 30,0 metres to 8,0 metres. The support system consists of columns and an arched trussed rafter. The axial distance of cross-links is 8,0 m. The spatial rigidity is ensured by the transverse and longitudinal bracings. The hall is founded on reinforced concrete strip footings. The perimeter and roof cladding consists of sandwich panels. In this work is processed a static calculation of structural elements including connections and drawing documentation.
|
|
|
Preparation of a prefabricated hall with administration
Schrámek, Martin ; Kučera, Zdeněk (referee) ; Kantová, Radka (advisor)
The subject of the diploma thesis is a preparation of a prefabricated hall with administration in Prace. The production hall will be used to produce glass fiber reinforced concrete. Next part and extension is an administrative part. The text part of the thesis contains a technical report on the building technological project, time and financial plan of the building - object, coordinating situation of the building with broader relations of the transport routes, study of the realization of the main technological stages of the building object, item budget of the main building object, time schedule of the main building, sets of the main technological stages, detection protocols for individual months, limits, balance of resources and personnel, plan of selected material sources, technical report of construction site equipment, technological regulation of precast reinforced concrete frame, technological regulation of precast concrete frame coverings Kingspan panels, Control and test plan of precast concrete frame, covering of precast concrete frame panels Kingspan and ceiling panels of the Spiroll administration, alternative suggestion of the exchange ceiling construction administration and comparison, noise study and thermal technology.
|
|
|
Load carrying structure of multipurpose hall object
Prokešová, Pavlína ; Karmazínová, Marcela (referee) ; Melcher, Jindřich (advisor)
The aim of diploma thesis is to design and assess a multipurpose hall building in the area of Brno. The shape of the hall is rectagular with dimensions 30,0 x 84,0 m. Roofing stucture is disegned and assessed in three versiions. Variant A is designed as a sadle - type truss from the CSH profile. Variant B is designed as a square - type truss from the CHS prosile. Variant C is designed as a arched truss from the CSH profile. These versions are compared by weight, manufacturing complexity and appearance. Preferable version is processed in detail. The work also includes a static calculation of the supporting elements, joints and drawing documentation..
|
guest ::
