|
|
Production single parts "COVER" from sheet metal
Vítek, Roman ; Císařová, Michaela (referee) ; Žák, Ladislav (advisor)
The Master’s thesis written in the frame of studies branch Manufacturing Technology (2303T002) is submitting design of technology production of sheet metal cover. The part is made of sheet metal 1,5 mm thick. The material for the part is HC260LA (ZStE260). There are no special mechanical or dimensional accuracy demands for the part. According to production run (5 000 pcs. per year for 5 years), design complexity and machine accessories of submitter was proposed manufacturing the part by drawing technology with finish laser cutting. Forming tool is designed according with press Erfurt PKZZ 315. Thesis includes economical evaluation of elaborated technology with other variants of production.
|
|
|
A Journey to Prehistory
Filipová, Markéta ; Rozbořil, Blahoslav (referee) ; Kvíčala, Petr (advisor)
The topic of my bachelors degree is closely linked to the movie shot by Karel Zeman. It is a story about four boys who decide to travel to the beginning of the time. The whole complex is connected to the opening scene of the movie, when the boys float through the cave into prehistory. This scene became symbolic and also the motif of the "journey" is present nearly in all the paintings. Journey to the beginning of time is a metaphor to study of prehistory. It is a mental travel to the history, travel that helpes us to understand the forgotten reality.
|
|
|
A Piece of Work
Maša, Vojtěch ; Stratil, Václav (referee) ; Ptáček, Jiří (advisor)
The topic of this thesis is to induce situation of the thesis defense in a context of the defense of my bachelor thesis. I organize and present as my bachelor thesis the following: Vaclav Stratil took on the role of student and he defends his drawing which is installed during the defense. His written defense writing is available as a part of my thesis. The supervisor of (student) Stratil is Jiří Ptáček, who wrote an opinion of the supervisor for Stratil. I (Vojtěch Maša) am Stratil's opponent and I wrote an oponent's opinion for Stratil.
|
|
|
Sheet metal forming production of automobile frame top
Marák, Daniel ; Šlais, Miroslav (referee) ; Forejt, Milan (advisor)
The project, which have been created within the framework study of engineering branch N2326, submit project technology process of pressing - part from micro-alloyed steel with higher yield point H 240 LA and proposal of tool design for its pressing. Technology process was designed in ten operations, base on literary studying of cold forming technology. Design of progressive die respects type of press machine, which is specified for production this part. Press KRUPP 400t disposes pressing force 4 000kN. Materials, used for design of tool, are in use by tool shops. Punches and punching dies are produced from steels 19 573, heat-treated according drawing documentation. Drawing punches and dies are produced from steel 19 552, hardened on 56+2HRc and coated by TiCN method.
|
|
|
Life of a Generation
Rujbr, Kamil ; Soukup, Štěpán (referee) ; Fexová, Patricie (advisor)
In my diploma thesis I am based primarily on the current problems that surround us, the texts of rap music, European cinematography and the environment of the Brno "Bronx", in which I have a studio and can authentically observe the ubiquitous problems in the Czech Ghetto. I will be based on my drawings. I have been dealing with this topic for a long time, but now I would like to make a certain overlap and a certain comparison. I will work not only with drawing and painting, but it is also possible that I will also use texts, recordings and videos.
|
|
|
Technology of manufacturing of titan exhaust
Hrubý, Patrik ; Slaný, Martin (referee) ; Zouhar, Jan (advisor)
The Diploma Thesis deals with the technology of manufacturing the titan exhaust for a two-stroke engine. It includes a description of the manufacturing procedure. It analyzes in detail the forming issue of sheet-metal parts in order to eliminate the spring-back effect, and it finds possible solutions to this problem.
|
|
|
Modern methods in spur gearing production.
Kopečný, Libor ; Zemčík, Oskar (referee) ; Zemčík, Oskar (advisor)
The division and comparison of modern methods of production of spur gearings. The introduction is focused on the characteristics and description of cog wheels. Furthermore, the types of gearing and gear mechanisms are introduced. The main part of the text deals with individual ways of a production of spur gearings including finishing methods. The following part of this work describes the importance and possibilities of heat and chemical-heat gearing production. In the last chapters, the evaluation and achieved results of individual technologies of gearing production are introduced.
|
|
|
Risk analysis and evaluation of using automated systems in building construction design
Koza, Josef ; Bednářová, Bronislava (referee) ; Vymazal, Tomáš (advisor)
This thesis in its first part deals with the complexity of the legislation, which is related to design activities and also trying to explain the basic rules for the creation of project documentation. In the main section then analyzes and evaluates the selected drawing software in defined categories. Based on the selection chooses the best drawing software and compared with the hand-crafted version of the design documentation in terms of time and cost. The final time for the creation of project documentation will be converted to a built-up area of the building and found the relationship between time constraints and the size of the built-up area of the new building. It will also be evaluating the return on investment to drawing software and assessing cost-effectiveness of various options drawing. The aim of this thesis is to analyze the risks in the use of software products for structural design and evaluate their use based on the value of work.
|
|
|
Drawing
Kleinerová, Zuzana ; Franta, Jiří (referee) ; Mikyta, Svätopluk (advisor)
My artwork consists of a constant drawing research. I am focusing on a drawing process . I am trying to explain and show the process in the final drawing through the expression of lines. In the bachelor thesis I defined the drawing as a complex of lines subjectively perceived in the time. The entire drawing is an experience. To get closer to the present I started to solve single line. In the moment of its origin I feel the symbiosis between me and the line. I called it the line existence. The existential thoughts fill every drawing process. The act of drawing is a state of mind. I find myself in the place where lines cannot be captured. Just for a while i am able to feel, ,,live“ the line. The black matter is formed by emotions. The lines comes from my soul, my body.
|
|
|
Picknick places
Fialová, Eliška ; Achrer, Josef (referee) ; Rathouský, Luděk (advisor)
I paint parks- places for trips, the terrains and spaces. I depict its structure, which is composed from various elements. I am interested in humane touch and movement and especially in their look. I am interested in the by human kind build environment or moved places. Moreover hove it influence humane being. Parks are places created for touch, for extraordinary feelings, for fulfill perceptions. Nevertheless I try to describe that sort of places and recreate them in my paintings.
|
guest ::
