|
|
Assembling and Functional Verification of a Home 3D Printer
Tesař, Jaroslav ; Zouhar, Jan (referee) ; Sedlák, Josef (advisor)
This thesis was created as a bachelor project in the Faculty of Mechanical Engineering at VUT in Brno. In the theoretical part, the additive technology Rapid Prototyping is introduced together with the most common methods, followed by the assessment of advantages and disadvantages of the new technology and its possible uses in various fields of human activity. In the experimental part of the diploma thesis was assembled and the printing parameters were set. Consequently the comparison models were printed on the 3D home printer and on professional printer Dimension uPrint. The accuracy of the printers is compared. The thesis concludes with the analysis of technical and economical parameters.
|
|
| |
|
|
Simulation of Impact The Heated Bed on Printet Model in 3D Printer
Sodomka, Petr ; Maxa, Jiří (referee) ; Vyroubal, Petr (advisor)
This diploma thesis solves the 3D printing problematics for non-commercial printers. Firstly possibilities of its using, heat diffusion and printing materials are described. Next part of thesis is focused on heating pads and printing nozzles for which 3D models in SolidWorks software are created. The temperature analyzes are tested with these models and then comparing of results is done. Working models for SolidWorks Plastics and SolidWorks Simulation software is created in following part. Thanks to this software tools printing model is simulated and deformation creating in printing process is observed. The most suitable solutions are chosen from gained solutions.
|
|
|
The Wheel of Death
Horčicová, Monika ; Chamonikolasová, Kaliopi (referee) ; Gabriel, Michal (advisor)
Bachelor thesis titled Wheel of death- Wheel of life cycle of life displays, which are inherently death. Object is part of the composition of the human skeleton in a circle, the imaginary ktrerý moves. The lower part of the wheel bends under its own gravity. The circle is a symbol of life and its cycle. The bones are a symbol of death.
|
|
| |
|
|
Production of glovebox handle on FDM 3D printer
Šuranský, David ; Fiala, Zdeněk (referee) ; Zemčík, Oskar (advisor)
The bachelor thesis analyzes car interior handle production, whose design was slightly modified compared to the original part. It consists of few design drafts, selection of the most suitable one, modification for 3D printing purposes and the part production of ABS material on a FDM printer. Post-processing operations and technical as well as economical conclusions are mentioned at the end of the thesis.
|
|
|
Production of interior car handle prototype on 3D FDM printer
Kaššák, Marek ; Dvořák, Jaromír (referee) ; Zemčík, Oskar (advisor)
This bachelor this processes the issue of manufacturing of a prototype of handle for the car interior using method fused deposition modeling method. First part of this is dedicated to a brief overwiev of prototype manufacturing using rapid prototyping technology , with FDM 3D printing and materials used by FDM method. Second part is dedicated to design of 3D model using AutoDesk Inventor 2014 software, prototype manufacturing itself, evaluating of construction technologicality and technological-economic evaluation of manufacturing costs.
|
|
|
Modification of 3D milling machine to 3D printer
Halamíček, Lukáš ; Vetiška, Jan (referee) ; Bradáč, František (advisor)
This thesis deals with rebuilding of engraving machine to 3D printer. In the first part it describes possible 3D printing technologies and its utilizations in rebuilding. In the next section suitable parts for reconstruction are chosen and described. Then the controlling of heating bed, hot end and filament feed is realized by using software TwinCAT by company Beckhoff. Functional 3D printer should be result of this thesis.
|
|
|
The Design and the Possible Practical Application of a Cooking Pot Handle 3D Model
Bezděk, Adam ; Jaroš, Aleš (referee) ; Sedlák, Josef (advisor)
The target of this bachelor thesis is designing and producing of a 3D model cooking pot handle with use of the modern 3D printing technologies. The virtual model of the cooking pot handle was produced with parametric program Autodesk Inventor and then printed by the Dimension uPrint 3D printer, which uses the Fused Deposition Modeling additive technology. The silicone mold was produced by using the printed master model. Then the model was molded from the two component plastic material into the silicone mold. Conclusion of this work contains technical-economic evaluation, where are both methods of producing the model compared.
|
|
|
Modification of 3D milling machine to 3D printer
Taska, Abraham ; Blecha, Radim (referee) ; Bradáč, František (advisor)
This work deals with the possibility of reconstruction of 3D milling machine into 3D printer. The first part is devoted to the search of possible printing heads for the use in the milling machine. This section also describes the most widely used 3D printing technology. Another part addresses proposal of connection of printing head into milling machine. The last section describes the control options of 3D printers and printing head.
|
guest ::
