|
|
Energy efficient boarding house in Havlíčkův Brod
Hlaváčová, Magda ; Hirš, Jiří (referee) ; Rubinová, Olga (advisor)
The aim of this master‘s project is the design of an energy-efficient guest house with a restaurant located in Havlíčkův Brod. This master‘s project consists of three parts. The first part focuses on the architectural and structural design of the guest house, the second part on the design of building services and the third part on the comparison of software for creating the energy performance of a building. It is about the DEKSOFT program in the Energy module from the company DEK, a.s. and in the Energy 2020 program from Svoboda Software. The building is detached and has two above-ground floors. The ground floor contains a restaurant with an adjacent kitchen, an office, a utility room, an air condition room and an entrance hall with a reception and a staircase to the second floor. On the second floor there are six apartments and one common corridor. The structural system is designed from ceramic blocks with thermal insulation made of mineral wool. Horizontal load-bearing structures and stairs are designed from cast-in-place reinforced concrete. The building has a flat service roof and flat extensive green roof. Heating is provided by a wood-fired solid fuel boiler located in the utility room. The building has mechanical ventilation with heat recovery. There are also photovoltaic panels on the flat roof of the building.
|
|
|
The Guest House with Restaurant
Švecová, Michaela ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of this master´s thesis is making a project documentation for a new constructed guest house with a restaurant. The object is designed in Karlov which is part of region Žďár nad Sázavou. The object is connected to local transport and technical infastructure along the east edge of the building plot. The object is a free-standing, two-storey building with a basement under part of the building. The main function is temporary accommodation and catering. The south part of the building serves as the guest house and the north part serves as the restaurant. Main entries are situated on the east part of the building which are connected to a parking lot with a thirty-seven parking places. The guest house is a two-storey building with a small basement and an inhabited attic. There are connecting corridors in the first and second floor, also, with the main guest accommodation. There are technical premises in the basement. In the guest house there are 11 guest accomodations with projected capacity of 32 persons. The restaurant has only one ground storey with a flat roof, and no basement. There is a wooden terrace on the west side of the restaurant. Projected capacity of the restaurant is 83 persons including persons on the terrace. The construction system is made of ceramic blocks for the upper storeys and concrete blocks in the basement. The building is based on concrete foundation strips in combination with structural formwork. The horizontal structures are made of reinforced concrete monolithic ceilings. The building is insulated by a contact thermal insulation system (ETICS) with polystyrene insulation. The roof of the guest house is a gable roof made of purlins with an inhabited attic. The construction of the restaurant´s roof is a flat roof with a pea gravel where the main part is made of reinforced concrete monolithic ceiling. The parapets are made of a structural formwork.
|
|
|
Boarding house with restaurant
Janča, Tomáš ; Nespěšný, Ondřej (referee) ; Petříček, Tomáš (advisor)
The subject of the master thesis is the elaboration of a project documentation for the constructin of a guesthouse with a restaurant in the cadastral area of Buchlovice. The building is designed ad a detached house, partially basemented with the use of an attic. It is going to be a new construction of an accommodation facility, with a lounges, restaurant and a wellness. Building with multifunction spaces are designed the way, that guests are provided with carefree ale pleasant experience, to achive the maximum relaxatio. The part of the building is also going to be opened to the public. The purpose of the construction is to offer clients services related to accommodation, relaxation, gastronomy and social activities. The building is based on plain concrete foundations. Load-bearing structures of the building are designed from the ground brick blocks, ceiling structures are designed from monolithic reinforced concrete, the roofing of the building is a combination of a slab roof and single-ply roofs. The drawing part is processed in AutoCAD, archiCAD, Lumion
|
|
|
Mountain guest house in Červená Voda
Vávra, Tomáš ; Semrád, Antonín (referee) ; Štěpánek, Ladislav (advisor)
The goal of the thesis was to develop project documentation for the construction of a pension with a restaurant. The object is located in the village of Červená Voda, near the Buková hora ski area. The building is built on sloping terrain. The pension has three above-ground floors and one underground. There are a technical equipment and a common parking lot on the underground floor. On the first above-ground floor there are a restaurant with a kitchen, employee facilities, a reception, offices, and other storage spaces for the pension. On the second and third above-ground floors, there are accommodation units. The accommodation capacity is 40 beds. The architectural and material solution is based on traditional mountain objects. The pension is designed very consistently and responsibly regarding to the surrounding nature and landscape. The structural system of the object is designed as a cross-wall. Load-bearing walls are designed from ceramic blocks. Ceiling constructions are designed as reinforced concrete monolithic slabs. The main part of the object is covered with a gable roof. The roof structure is composed of a truss system.
|
|
|
Hotel Špindlerův Mlýn
Boulaouad, Hichem ; Picmaus, Petr (referee) ; Brukner, Bohuslav (advisor)
The subject of the diploma thesis is the project documentation developed at the construction stage for a new hotel with restaurant and wellness. The hotel is located in Špindlerův Mlýn and is designed as a stand-alone hotel. The hotel has two floors above ground, an attic and a basement. The floor plan of the hotel is designed in the shape of a cross with a penetrating rectangular annex over the basement and the first above-ground floor. The outbuilding is covered with a flat vegetated roof, and the main, highest mass is covered with a saddle-shaped and semi-hip-shaped sloping roof with a 40° slope of the roof plane. The layout of the hotel includes a collective garage and a wellness area in the basement, while the first floor has a restaurant, a congress room and an accommodation area with nine hotel rooms, two of which are wheelchair accessible. On the second floor above ground level and the attic there is only an accommodation area with two gyms, each of these two floors has nineteen hotel rooms. In total, the hotel offers accommodation for seventy-five people. Structurally, it is a building based on a foundation slab, the load-bearing vertical structures are a combination of reinforced concrete and masonry ground hollow bricks, the ceiling structures are made of reinforced concrete ceilings and the roof structure is made of a wooden purlin truss. The entire object is insulated with an insulation system.
|
|
|
Pension Přehrada
Svobodová, Monika ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
The topic of master project was the processing the design documentation for a Pension Přehrada. I designed a pension with a restaurant and a small wellness area. It is a detached building in the cadastral territory of Brno Kníničky. The building is L-shaped and consists of two parts. The first part has two above-ground floors and a loft. This part of the building is covered by a gable green roof. The second part of the building has one above-ground floor and warm flat roof. The vertical structures are designed from ceramic blocks. The external masonry is insulated with the ETICS. Some external masonary are designed like exterior ventilated facade with stone cladding and a green facade. Floor structures are designed by SPIROLL panels. The master project includes the concept of heating, ventilation, cooling, domestic hot water heating, lighting, rainwater management and photovoltaic panel design. In the part of my project, I focused on optimizing the design of the gable roof. I changed the composition of the gable roof so that more rainwater would be retained to be used in the facility. I placed additional photovoltaic panels on the gable roof and simulate whether they would cover the electricity consumption in the building. I evaluated the changes in the energy performance certificate, and compared them with the original design.
|
|
|
Resort "Na Hrázi"
Kubík, Tomáš Jiří ; Kolářová, Eva (referee) ; Kolář, Radim (advisor)
The diploma thesis deals with the new construction of a building for temporary housing (hotel) with a restaurant - Resort Na Hrázi. The construction is situated on a flat plot of land next to a nearby housing development in the cadastral area of Kozlovice near Přerov in the Přerov district. The building with three above-ground floors, covered with a flat single-skin roof, was designed exactly according to the investor's requirements. The vertical structures are designed from aerated concrete and sand-lime blocks. Horizontal structures are made of pre-tensioned ceiling panels. The roof structure is designed as a flat vegetated roof. The building can accommodate up to 60 people in 28 rooms. It also includes a restaurant designed for both hotel guests and the public. Diploma thesis is prepared according to the assignment in the form of project documentation for the execution of the construction.
|
|
|
Building design with minimal environmental impact
Fric, Marek ; Kolářová, Eva (referee) ; Kolář, Radim (advisor)
The content of my master´s project is a design of an NZEB building of a restaurant. The building is located in Brno near Nová Zbrojovka and the Svitava river. The design was carried out with Revit and with a partial implementation of BIM. The master´s project consists of three main parts. The first part focuses on the structural design of the building, the second part is focused on the design of building services and the third part consists of introducing the possibilities of advanced application of BIM in the design of the buildings. The building is V-shaped with a flat green roof and has two floors. The load-bearing system combines masonry walls, reinforced concrete walls, and columns. The floor slabs are also made of reinforced concrete. The partitions are made of plasterboard and masonry. The foundation of the building is formed by a reinforced concrete ground slab. For the insulation was chosen combination of ETICS and ventilated facade. The heating, cooling and air conditioning are provided by an HVAC systém and heat pumps. As a source of hot domestic water was designed electric boiler and heat pumps. The main source of electric energy is provided by a distribution network but partial independence of the building on the distribution network is ensured by photovoltaic panels. The sewer system is made of a combination of gravity sanitary sewer and a vacuum stormwater system. A source of drinking water is the water supply system.
|
|
|
Civic amenities building
Gajárková, Marie ; Svoboda, David (referee) ; Berková, Petra (advisor)
The aim of this Master´s project is to design a new restaurant with a guest house at the outskirt of the city Rožnov pod Radhoštěm. The proposed building has a ground floor in the first part of the building and two ground floors and attic in the second part. The first includes technical facilities, a storage space, a wellness area, toilets and a restaurant with a kitchen. The other floors are designed for accommodation with a total 10 rooms. The structure is based on strip foundations. The structural system is made of masonry walls. The external wall of the building is made of ceramics blocs, insulated with ETISC. The floor structure is designed as precast concrete panels. The roof of the single floor of the building is designed as a flat roof. The roof above attics is designed as a pitched roof. The project contains designed of photovoltaic panels, heating and HVAC. The systems are designed to maximize ecologic efficiently. The third part of this diploma thesis is the spatial acoustics of the restaurant and salon.
|
|
|
Pension in the heart of the Highlands
Kolářová, Kristýna ; Krupica, Roman (referee) ; Jelínek, Petr (advisor)
The subject of this thesis is the preparation of project documentation for the construction of pension. The building is located in the upper part of the village of Vlachovice, district Žďár nad Sázavou. The pension is detached located on a large, slightly sloping land. On the ground floor there is an entrance for guests, a restaurant, operational and technical facilities. In the attic there are 4 apartments for temporary accommodation for maximum of 20 people. The building has a T-shaped floor plan measuring 23.5 x 15 m and 9.5 x 9.5 m and is roofed by saddle roof with purlins. The construction system of the building is a wall system. The vertical perimeter load-bearing structures are designed from ceramic blocks filled with polystyrene. The ceiling above the 1st floor is made of load-bearing cavity panels with prestressed reinforcement. The building is designed with consideration of the existing and future surrounding buildings. There are 18 parking spaces on the property. Part of the thesis is also a basic assessment in terms of building physics and fire safety solutions.
|
guest ::
