|
|
Noise measurement of electric machines
Fodor, Viktor ; Vítek, Ondřej (referee) ; Janda, Marcel (advisor)
This work discusses the problem of generating noise in electrical rotating machines, engines. First we explain what noise and sound is, its characteristics, its distribution in machines. Then we discuss the possible sources of noise in electrical motors and the possible reduction of noise. To verify the theory mentioned in this work, we will execute a noise measuring on an induction engine. Further we realize a measurement of the operating curve of the machine. Finally, we describe various measurements.
|
|
|
Design of the finishing machine for rolling bearing's elements
Cagaš, Radek ; Křenek, Miloš (referee) ; Košťál, David (advisor)
The thesis deals with the design of the device that is used to improve the quality of the surface of spherical rollers. Spherical rollers are used for the measuring of the conditions in the EHD contact. The high roughness and waviness of the spherical rollers’ surface is a problem. Several machining methods are described in the theoretical part. The overview in theoretical part has been used for choice of the machining methods (lapping and abrasive polishing). The spherical rollers‘ machining system, its construction, electronics and control systems are described in the next section. The last part is focused on testing of assembled device, and on checking its functionality. The desired roughness of the spherical rollers' surface, suitable for successful interferometric measurement, was achieved by combining the selected machining methods. The roughness and waviness achieved was Ra0.01 micron Wa0.022 microns.
|
|
|
Analysis of vibratory roller with new type of steering kinematics
Votroubek, Jan ; Rada, Zdeněk (referee) ; Škopán, Miroslav (advisor)
Diploma thesis includes design of bearings of steering joints of tandem vibratory pivot-steering roller Ammann AV 95-2, design of bearings of steering joints of tandem vibratory with new type of steering kinematics and calculation and comparison of contact pressures between drum and soil for different angles of turn of front and rear drum for different types of tandem vibratory rollers. Comparison of contact pressures is realised for pivot steering roller AV 95-2, articulated tandem roller AV 80 X, articulated tandem roller with modified configuration of steering-joints and tandem roller with new type of steering kinematics.
|
|
|
Computational modeling of cranktrain mechanical losses
Smetana, Roman ; Píštěk, Václav (referee) ; Novotný, Pavel (advisor)
In the introduction of master’s thesis is introduced the common identification with basics of friction, wear and mechanical losses. Master’s thesis includes description of solving losses by help of the MBS software and analysis of mechanical losses in the crank train. In the last part of work is introduced design for decrease mechanical losses in the crank train. At the close of master’s thesis are reviewed records.
|
|
|
Design of coaxial high-speed gear reducer
Neklapil, Libor ; Ing. Tomáš Hubáček, Ph.D (referee) ; Bradáč, František (advisor)
The thesis deal with design of coaxial high-speed gear box for small-scale turboshaft engines. At the beginning a study of problems was performed and for design concept was elected version of single-shaft turbo-engine with electric generator. Kinematic diagram, type of gear design, material and lubrication method was designed. Further was solved proposal of basic gearing parameters, choice of the number of tooth and basic proposal calculations were performed. Was performed check calculation of gearing, calculation of bearings durability and was processed design documentation in required range. Designed gear reducer has two stage with three coutershafts, that are deployed evenly about main axis of reducer. First stage is gear with external gearing, second stage with internal gearing. The thesis may be used as a template for next similar gear reducers design.
|
|
|
The footbridge for pedestrians and cyclists
Pupík, Antonín ; Sýkora, Karel (referee) ; Puchner, Josef (advisor)
This thesis deals with the design and assessment of footbridge for pedestrians and cyclists in the city of Hranice, Rybare district. The footbridge will serve as a crossing point over the river Bečva and will conect cycling trail with the street Rybarska. The content of this paper is to propose two different variants of structures. One of these options is selected based on their economic evaluation and further processed. Length of the bridge is 50m.
|
|
|
Survey and Assessment of highway D2 Bridge
Výpustek, Libor ; Suza, Igor (referee) ; Cikrle, Petr (advisor)
This thesis deals with the exploration and evaluation of the existing bridge carried him on the highway D2. The work is divided into theoretical and practical parts. The theoretical part focuses on the technical surveys, diagnosis of building structures and some methods of investigation and testing of building structures. In the practical part the visual inspection and diagnosis of disorders of the highway bridge substructures ev. No. D2-058, to determine material characteristics substructure and evaluate the state of the bridge. In conclusion, the practical part of the recommendations for the design and method of repairing the bridge.
|
|
|
Diagnosis of mechanical vibrations in asynchronous motor origin
Dostál, Martin ; Dostál, Lukáš (referee) ; Janda, Marcel (advisor)
Every machine needs to be maintained and controlled, if may work reliably during they service life. Big part of service life of expensive machines are those machines in operation. Vibration diagnostics is type of analysis, that doesn’t need removal of rotation machinery. The vibration, that are created by running machinery, are used as source of information about mode of operation. This master’s thesis contains theoretical analysis of vibration diagnostics and vibration measurements of a particular machine. This thesis contains 3D models of bearings and rotor asynchronous machine, which are created by software Autodesk Inventor 2014. Bearings vibration analysis of this models is performed by software Ansys Workbench.
|
|
|
Worm conveyor
Sedláček, Martin ; Jonák, Martin (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with calculation and construction of worm conveyor for slightly sloping transport. The whole work is divided into two main sections, which include structural and textual parts. The text contains analysis of option for single parts of conveyor, functional and strength calculations, which are necessary for proposal of worm conveyor. The structural part includes mechanical drawings, which consists of drawing of configuration and drawings of details for worm shaft.
|
|
|
Optimalization of Temperature for Semi-hot Forming of Roll Bearings
Hrouzková, Andrea ; Klakurková, Lenka (referee) ; Doležal, Pavel (advisor)
This bachelor's thesis solve the problems about optimalization of temperature for semi-hot forming of roll bearings steels. The purpose of this thesis is finding the optimal interval of temperatures, in which 100CrMnSi6-4 bearing steel shows good strain and deformation characteristics after forming. Methods for data evaluation of mechanical properties are the tensile and upsetting tests which were performed on higher temperatures. It was microscoped microstructure changes of the bearing steel 100CrMnSi6-4 during temperature influence and classification with the light microscope.
|
guest ::
