|
|
Static solution of the ceiling structure of apartment building
Habanec, Kamil ; Nečas, Radim (referee) ; Zich, Miloš (advisor)
The Bachelor thesis deals with the static solution of the ceiling construction of an integrated apartment building. The aim is to design, or change the sizes of the projected structures in the submitted project, to ensure the interruption of thermal bridges and protection against foot noise. Subsequently, their static solution, dimensioning and assessment to marginal states. The elements intended for the solution are ceiling structures above the second upper floor, beams, a connecting staircase and a column. The calculation of internal forces was performed in the student version of SCIA Engineer 20.0 with a comparison of values on an independent simplified model. The work also includes drawing documentation for the aforementioned elements. The calculation was carried out according to the applicable standards and principles.
|
|
|
Multifunctional building Brno - Líšeň
Horenský, Dominik ; Teplý, Vladimír (referee) ; Odvárka, Antonín (advisor) ; Pěnčík, Jan (advisor)
The aim of the bachelor's thesis was to create the documentation for building permission for polyfunctional building located in Brno-Líšeň. Building has four floors and two underground floors. On the ground floor are two leasable spaces (shops). In the 2-4 upper floor are also leasable spaces (doctors, offices). In the first underground floor is cafe. It's in the west part of the building. The rest of that floor is leasable space. In the second underground floor are parking spaces. The entrance to the 2nd underground floor is secured by outdoor ramp located on the north side of the building connected to the main road. Structural system of building is cast-in-place reinforced concrete frame. The roofs of the building are all designed as warm flat roofs. Object is based on simple foundation pads and strip foundations.
|
|
|
Diagnostics of Reinforced Concrete Bridge
Rozbroj, Lukáš ; Anton, Ondřej (referee) ; Cikrle, Petr (advisor)
This thesis contains diagnostics of a reinforced concrete girder bridge in the municipality of Újezd u Brna. The aim is to conduct an inspection of the bridge, gather quality photo-documentation of defects and failures and design and conduct a diagnostic examination of such extent that would be necessary for judging the load bearing capacity of the bridge. The result of this thesis is the determined load bearing capacity and a proposal of measures required to keep the bridge functional.
|
|
|
REALIZATION OF A RESIDENTIAL BUILDING IN UHERSKE HRADISTE
Sedlářová, Martina ; Doubek, Rostislav (referee) ; Kantová, Radka (advisor)
The subject of this master’s thesis is elaboration of selected parts of the building tech-nology project of residential building Stepnice in Uherske Hradiste. Part of the project is technical report, estate road layout, studies of major technological stages, project of site equipment, design of major machines and mechanisms, technological regulations and control and test plans for prefabricated ceiling and masonry system. Attachment of this master´s thesis is drawings of site equipment, selected construction details, working safety, instructions for using the building, budget by items and a time plan. The aim of the project is to design appropriate and economically effective procedure for realization of the building.
|
|
|
Reinforced concrete lookout tower
Kalinová, Kristýna ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
The diploma thesis is focused on structural design and assessment of lookout tower. The elements of the lookout tower are made of cast-in-place reinforced concrete except for the stair flight, which is made of prefabricated reinforced concrete. The output of the diploma thesis is a structural design report and drawings of the shape and reinforcement. The calculations were performed using Dlubal RFEM 5.26.02. The drawings was processed by AutoCAD 2020 with the RECOC extension.
|
|
|
Police district department of the Czech Republic, Brno-Černovice
Vaníček, Marek ; Kacálková, Lenka (referee) ; Kacálek, Petr (advisor)
The subject of the master thesis is design of a new detached office building for public administration of Czech Republic Police as a district department in Brno-Černovice. It is presented as a form part of project documentation for a building construction. The building has a cellar and two above-ground floors. It is founded on a strip foundation and pads. The building is roofed by green roof. There are office rooms, sanitary facilities, archives, interrogation rooms, pre-trial detention cells, garages, storage rooms and dog cages in the above-ground part. In the basement, there are technical facilities and shooting range backround. Structural system of the building is wall longitudinal masonry system from clay blocks. The ceiling structure is from cast-in-place reinforced concrete. The part of the building is with ventilated facade a nd rest is insulated with contact thermal insulation.
|
|
|
Preparation for the implementation of the lower building of the pension in Opava
Žůrková, Amálie ; Doubek, Rostislav (referee) ; Kantová, Radka (advisor)
The bachelor's thesis deals with the implementation of a substructure of a guest house in Opava. This building, founded in complex foundation conditions, is composed of five floors without a basement. The house is based on piles, which support the foundation strips. Part of the rough substructure is also an installation channel, made in the form of a watertight concrete structure. This work contains a technical report, the situation of the construction with wider relations of transport routes, a detailed statement of acreage, technological regulation for earthworks and foundation, drawing and report of construction site equipment, time schedule, machine design, control and trial plan, safety and health at work, schematic procedures of earthworks and foundations, as well as item budget.
|
|
|
Assessment of Reinforced Concrete Elements
Pecháček, Martin ; Šulák, Pavel (referee) ; Švaříčková, Ivana (advisor)
The aim of the bachelor's thesis is the analysis of internal forces design and assessment of the reinforced concrete loadbearing elements. Staircase, floor slab and window header of a detached house with supporting masonry walls are designed in the thesis. In the project of the floor slab the occur of a thermal bridge is taken into account. To prevention of thermal bridge are used systematic elements. To analysis internal forces on the structure Finite Element Method in the SCIA Engineer 19.1 software is used. The results of selected sections and selected load combinations are verified by method of replacement beams. Internal forces on the staircase are calculated by method of replacement beams.
|
|
|
Poliklinika Chotěboř, preparation of the construction
Semerád, Vojtěch ; Šťastný, Jiří (referee) ; Kantová, Radka (advisor)
The thesis is focused on construction technology solution for realization of the construction of a polyfunctional building in Chotěboř. Part of the project is technical report, studies of major technological stages, project of site equipment, design of major machines and mechanisms, technological regulations. The thesis contains selected technological regulations of carried out activities, control, and test plans, safety and health protection at work comparison of ceiling systems.
|
|
|
Office Building
Pecháček, Martin ; Perla, Jan (referee) ; Švaříčková, Ivana (advisor)
The aim of the diploma thesis is the analysis of internal forces design and assessment of the reinforced concrete loadbearing structure of the office building. Point-supported floor slab, inside column, external wall and staircase are designed in the thesis. Finite Element Method in the SCIA Engineer software is used to analysis internal forces on the structure. Thesis also includes project of the securing foundation pit and pile foundation of the building.
|
guest ::
