|
|
Mixed-use building
Franc, Filip ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The aim of the diploma thesis is to design new mixed-used building in Drásov. This building is situated on the outskirts of the town. The mixed-used building is design as detached building with four-storey and with partial basement. In the basement there are technical utilities, small storages and meeting room. On the firt floor there are commercial space as shoe store, sports equipment, household goods and hourer´s shop. On the second floor there are two separeted office premises. On the third and four floor there are eight flats. On the each foor there are four flats type 3+kk. Structural system of the building is design from ceramic masonry type Therm and from permanent formwork. There are ceilings from prestressed concerete floor slabs. The roof of the building is design as single-layer flat roof.
|
|
|
Steel Load-bearing Structure of administrative building
Kašíková, Anna ; Barnat, Jan (referee) ; Bajer, Miroslav (advisor)
The thesis deals with the design of the load-bearing structure of an office building in Olomouc. The ground plan dimensions of the hall are 36 × 36 m, the height of the main nave is 17 m (4 GF), side 10. 7 m (3 GF). The spatial beam structure is formed by symmetrical transverse frame links in one direction, in the other direction by horizontal hinged elements. The roof structure is made of truss girders pin-supported on pillars at the main nave, and a flat roof beside the nave. The pillars are placed on the joints and spatial rigidity of the structure provides system of space bracings. The main material is S275.
|
|
|
Multi-storey car park
Balhar, Martin ; Balázs, Ivan (referee) ; Sýkora, Karel (advisor)
This thesis deals with design of steel structure multi-storey garage. It is the five-storey steel structure of rectangular plan. The construction is designed for the city of Olomouc. Static calculation is solved by a combination of manual calculation and calculation using software Scia engineer 18. There are the following main load bearing structural elements designed and examined in the structural analysis: truss, purlin, bracing, column, composite beam, joints, foot and anchoring. Thesis includes drawing documentation
|
|
|
Business Centre
Hándlová, Barbora ; Balázs, Ivan (referee) ; Pilgr, Milan (advisor)
The diploma thesis deals with design of steel structure of shopping centre, which is located in Zlín. The total ground plan‘s dimensions of the structure are 153 x 49 m. The maximum height of the building is 23,1 m. The structure of the shopping centre is formed by columns, primary and secondary beams. Floor structure is designed as composite steel and concrete structure. The roof structure, above the central part of the buildig is designed in two alternative versions. There is prepared statics calculation of the main load-bearing parts of the structure, including joints and details.
|
|
|
Static design of the structure composed of combination of steel and structural glass
Potůčková, Simona ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The objective of the bachelor thesis is to design the load-bearing construction system and its cladding made of a combination of steel and structural glass and to verify its sufficient resistance. The object has rectangular floor plan with dimensions of 7,5x10,5 m and and its total height is 24,5 m. The building is located at the suburban area of the city Ostrava, precisely Ostrava Poruba. The construction is composed of a ground floor and six upper floors. The main load-bearing system consists of steel frame formed by six tubular columns connected beams and sway bracings ensuring the spatial rigidity of the structure. The object was designed according to currently valid standards using ULS and SLS verification.
|
|
|
Trade House in Brno
Serbousková, Kateřina ; Sýkora, Karel (referee) ; Barnat, Jan (advisor)
The final thesis deals with the design of the steel loadbearing structure of the shopping center situated in Brno. The built-up floor area is 1973 m2 (L-shaped ground plan with dimensions 48 m x 50 m). The construction consists of three parts. Building A has four above-ground floors and reaches a height of 25.5 m. The steel structure of mono-pitched roof is designed in two options. Both options consist of full-length purlins and truss girders. Building B is a single-storey building with a mono-pitched roof top reaching 8.1 m high. Building C is three-storey with a flat roof. The first floor has a construction height of 4.5 m and the remaining two floors reach height of 3.6 m, which coincide with building A. The steel structure is made of steel-concrete composite ceilings and pin-supported columns. In the case of bracings, pressure was eliminated by means of non-linearities.The work includes proposal, assessment of the supporting structure and calculation of the directional details. Internal forces were determined based on a static analysis in the SCIA Engineer calculation program.
|
|
|
Multi-storey building
Surovec, Daniel ; Bajer, Miroslav (referee) ; Štrba, Michal (advisor)
The object of this thesis is to design and assess steel structure of multi-storey office center in Vsetín. Floor plan dimensions of building are 48x40m. The building has ten floors. Overall height is 35,5m. The building ceilings made of composite steel and concrete structure. The part of build are roofer atrium and one bigger room aula with dimensions 24x16m. Two construction variants were designed and assessed. Longitudinal and transverse rigity of variant A is ensured by truss bracing. Transverse rigity of variant B is ensured by truss bracing and longitudinal rigity is braced by bracing frames. The variant A is better.
|
|
|
Business Centre
Dušek, Ivo ; Sýkora, Karel (referee) ; Pilgr, Milan (advisor)
This Master thesis was about calculation and design of supporting steel bar structure multi storey administrative building. Steel structure with rotation symmetric floor plan has sixteen storey. Maximal size of building is 100x100m. Structural design report is made by a combination of manual calculations and calculations using software RFEM by Dlubal. Structural design report includes calculations of secondary beam, primary beam, column, bracing, purin, truss girder and others part of structure with their connections. Thesis includes drawing documentation and report.
|
|
|
The load bearing structure of multi-storey reinforced concrete builidng
Burda, Patrik ; Švaříčková, Ivana (referee) ; Šimůnek, Petr (advisor)
The diploma thesis is focused on design on loadbearing reinforced concrete structure of multi-storey apartment building with shops and offices on the ground floor and underground garage. The thesis consists of the analysis and design of ceiling slabs above underground floor, supporting columns and the beam under the underground floor ceiling slab. Calculation 3D model was created to determine internal forces. All structures are designed according to EC2, ČSN EN 1992-1-1. The thesis includes elaboration of static calculation, shape drawings, drawings of reinforcement of solved structures. The rest of the project part are not analysed.
|
|
|
Steel structure of a multi-storey administrative building
Cejpek, Martin ; Pešek, Ondřej (referee) ; Balázs, Ivan (advisor)
The main target is to design and asses the steel structure of a administartive multi-storey building. The steel structure is T shaped, with 30m span and 42m length. An analysis of two solutions of the supporting structure was performed. The first variant is consists of rigid bracing system. Trusses bracing in the second variant is an alternative solution. Both variants were compared and the amount of steel was found. The selected option was developed in greater details with static calculation, drawings and material report of steel.
|
guest ::
