| |
| |
|
Magnetorheological Strut for Vibration Isolation System of Space Launcher
Macháček, Ondřej ; Borin, Dmitry (referee) ; dr hab. inż. Janusz Gołdasz, prof. PK (referee) ; Mazůrek, Ivan (advisor)
Práce se zabývá návrhem magnetoreologické (MR) vzpěry vibroizolačního systému (VIS) pro kosmický nosič. V rešeršní části jsou popsány vybrané VIS a vzpěry těchto systémů, které byly v kosmických nosičích využity v minulosti. Každá z těchto vzpěr obsahující kapalinu byla těsněna pomocí statických těsnění a pružných vlnovců vyrobených z oceli. Důkladněji byla analyzována vzpěra pasivního systému VIS s označením ELVIS, jehož konstrukce se stala inspirací pro tuto práci. Jedná se o tříparametrický systém, v němž je tlumič uložen na pružině, jejíž tuhost přibližně odpovídá objemové tuhosti vlnovců respektive jejímu průmětu do axiálního směru (pressure thrust stiffness). V práci je představena metodika pro stanovení “pressure thrust stiffness” na základě geometrie vlnovce a také uvedeny parametry vlnovce díky kterým je možné měnit poměr mezi axiální a “pressure thrust stiffness” vlnovce. Tento poměr ovlivňuje v dané koncepci vzpěry její dynamické chování a tím i chování celého VIS. Pro predikci dynamického chování vzpěry byl vytvořen multi-body model VIS založeného na Stewartově plošině a detailnější model jediné vzpěry. Simulace provedené v tomto modelu odhalily parametry, které mají vliv na výkonost tlumiče ve VIS: časová odezva a dynamický rozsah. Díky modelu byl určen rozsah těchto parametrů, ve kterých bude zaručena efektivní funkce vzpěry ve VIS, konkrétně: časová odezva: 0-5ms, dynamický rozsah: 5-10. Před finálním návrhem vzpěry byla sestrojena vzpěra experimentální vzpěra, jejíž parametry byly přesně naměřeny a využity pro verifikaci jednotlivých modelů. Poznatky získané během experimentů byly využity při návrhu finální vzpěry. Jeden z nejdůležitějších poznatků byla nutnost náhrady feritového magnetického obvodu s ohledem na jeho křehkost. Proto byl odvozen tvarový přístup k navrhování rychlých magnetických obvodů z oceli s využitím 3D tisku, který byl následně patentován. Navržená vzpěra obsahuje magnetoreologický ventil jehož odezva je predikována na 1.2 ms a dynamický rozsah 10. V závěru práce je představena metodika, díky které byla vzpěra navržena.
|
|
The grinding of valves
Stránský, Michal ; Bumbálek, Bohumil (referee) ; Osička, Karel (advisor)
This diploma thesis deals with grinding of parts of valves. In the first part is theoretically described valve and its manufacturing. Another part focuses on the analysis of existing grinding technology. In last part of this diploma thesis is written about choosing of suitable places for rationalization, design of rationalization and technical-economic evaluation of performed rationalization.
|
|
Control of water supply for a house
Chvátal, Michal ; Richter, Miloslav (referee) ; Macho, Tomáš (advisor)
The diploma thesis deals with the design and implementation of the system that will control the water supply for the family house and its garden. The system aslo allows you to store a history that can be viewed via the web interface. The web interface also allows you to set system parameters and monitor the current status.
|
|
Safety of automated industrial valves in operating conditions
Kryštof, Ondřej ; Trávníček, Petr (referee) ; Kotek, Luboš (advisor)
Choosing suitable and safe valve with accessories depends on general specifications for plant. Using valve for on/off, throttling, back-flow prevention, etc., pressure drop is related with Kv value or leakages from piping systems are main factors for properly valve selection. Valve have to resist chemicals and substances that may change the state, temperature and its fluctuation, pressure, corrosion and erosion. This properties determine pressure class, temperature resistance, connection into pipe and sealing material as gland packing, seats, seal between flange etc. This and other specification, listed in this thesis, can help determine suitable type of valve. This thesis deals construction design of valve and accessories as well. The last chapters are focused on calculation of safety valve and selection safe and appropriate control valve with accessories.
|
|
Regulatory and safety features hydraulic circuit
Smyček, Ondřej ; Hloska, Jiří (referee) ; Škopán, Miroslav (advisor)
This bachelor´s thesis is focused on safety and regulatory elements of hydraulics. The main objective is to deal with options which are offered today. The theoretical part is accompanied by a design of throttle valve in a shorted circuit for an exchanger, which is a part of the heat transfer station, type AQHS by the company Tenza, a.s. In this design, two calculating softwares are used and compared. The input data for the design are based on the already existing heat transfer station Dřevařská 31, 33.
|
| |
|
The device for measuring of camshafts timings
Jozíf, Lukáš ; Mazal, Pavel (referee) ; Mazůrek, Ivan (advisor)
Bachelor’s thesis is focused on constructional concept of device for measuring of camshafts timing and its wear-out. After short introduction and definitions of basic concepts there are problems of cams design analyzed and overview of the commercially offered devices is mentioned. Next part focuses on construction of the proper device including design documentation. Procedure of measuring with the device and example of some data evaluation is described. In the conclusion I evaluated constructional and economic aspect the whole concept.
|
|
Influence of thermal shocks on fatigue of pressure equipment components
Umlauf, Martin ; Vincour, Dušan (referee) ; Létal, Tomáš (advisor)
This thesis examines influence of thermal shock on fatigue of pressure equipment components. The paper relates to project of IMI CCI Brno, which is a leading manufacturer of valves for the energy and process industries. Analysis concerns the impact of thermal shock concentrating on high pressure part of the steam valve. And proposal for a new valve geometry that reduces machining operations and reduce financial costs of production. First part of the thesis presents a basic review of fatigue damage components concerning mechanical loading and thermal – mechanical loading. Second part of the study creates FEM model of the valve. FEM model simulate temperature field and stress during thermal shock. Influence of thermal shock to fatigue damage was computed on basis of stress tensor obtained from FEM simulation under Chapter 18 of the standard EN 13445-3. Existing valve geometry was verified and the new geometry was proposed that simplified and reduce financial costs of production.
|