National Repository of Grey Literature 57 records found  beginprevious21 - 30nextend  jump to record: Search took 0.01 seconds. 
Use of VAG-COM PROFI Diagnostic Kit in Forensic Engineering
Wertheim, Adolf ; Tylšar, Vladimír (referee) ; Panáček, Vladimír (advisor)
The thesis deals with possibilities of application of VAG-COM PROFI diagnostic kit in forensic engineering. After defining a theoretical basis, according to possibilities of evaluation of technical condition of a vehicle, the thesis is focused on applying diagnostic methods using above mentioned diagnostic kit. With respect to opportunities of identification of driving parameters, possibility of acceleration measurement and estimation of engine power are introduced. Describing of methodology and making the final statement are contained in the thesis as a part of every single measurement.
The influence of the vibrations of the grinding spindle of the grinder on the vibrations of large shafts during machining
Hanych, Libor ; Vlach, Radek (referee) ; Nahodil, Petr (advisor)
This master's thesis deals with vibrodiagnostics and its use for monitoring of the vibration transmission during grinding of large shafts at Siemens Electric Machines s.r.o. based in Drásov. Diagnostic system for machine tools testing was designed as well as a measurement methodology, which is used to detect the vibration transfer from the grinding spindle to the workpiece. Influences that affect the quality of the ground surface were determined, based on evaluation of measured data. The last part is dedicated to a proposal of a diagnostic and measuring system.
Data processing from the online diagnostic system
Cirhanová, Iva ; Jankových, Róbert (referee) ; Zuth, Daniel (advisor)
This master thesis deals with data processing from an online diagnostic system. The theoretical part of the work is divided into three chapters, the first deals with technical diagnostics as such, there are basic terminology and concepts associated with technical diagnostics, such as diagnostic methods, tools, models and signals. The second part is focused on diagnostic systems and their division. This chapter also provides some examples of online diagnostic monitoring systems from three different companies. The last chapter of the theoretical part is devoted to the description of the possibilities of data collection from diagnostic systems, ie. description of communication buses and protocols. The practical part of this work focuses on creating an application for data collection and visualization.
Predictive system maintenance machines in engineering practice
Rázgová, Benedikta ; Řezníčková, Hana (referee) ; Hammer, Miloš (advisor)
This bachelor thesis deals with the predictive maintenance of machines in engineering practice. The first part of the thesis deals with problems theoretically, there is described generally maintenance and methods of technical diagnostics of machine tools. The practical part focused on the application of one selected method, vibrodiagnostics. Part of the work is the vibrodiagnosis evaluation of the milling center, the design of the predictive maintenance system and other recommendations for SMC Industrial Automation CZ s.r.o. Vyškov.
Maintenance and diagnostics of machine tools focusing on vibrodiagnostics, electrodiagnostics and tribodiagnostics
Houška, Jan ; Řezníčková, Hana (referee) ; Hammer, Miloš (advisor)
Master‘s thesis deals with maintenance and related technical diagnostics of machine tools. Diagnostics methods on which is the thesis focused are vibrodiagnostics, tribodiagnostics and electrodiagnostics. Work includes design of diagnostic system and measurement of vibration and electrical parameters of the machining center. Based on given results from data evaluation, further steps in predictive maintenance and usage of technical diagnostics for machine tools are recommended. Within tribotechnical diagnostics, the thesis is based on evaluation of long-term monitoring of process liquid status, which was used in several machining machines. A procedure for the measurement of selected parameters is proposed and periodical liquid status checks are established.
Methods of technical diagnostics - vibrodiagnostics
Soldán, Josef ; Hammer, Miloš (referee) ; Hájková, Alena (advisor)
The bachelor's thesis deals with technical diagnostics, especially vibrodiagnostics. The work first describes technical diagnostics in general, namely its means and methods, including vibrodiagnostics. The mentioned method is the focus of the presented bachelor's thesis, therefore its description forms the majority of the theoretical part. As part of this work, the vibrations of the electric motor were measured, which were subsequently evaluated according to the standard.
Diagnostics of the state of the machine/machine components with the help of fuzzy sets
Horák, Roman ; Zuth, Daniel (referee) ; Marada, Tomáš (advisor)
Diploma thesis deals with the use of fuzzy logic in the field of technical diagnostics. The thesis is divided into theoretical and practical parts. The theoretical part describes technical diagnostics, fuzzy logic and genetic algorithm. The theoretical part is followed by a practical part in which fuzzy logic is tested on the Iris dataset and then the acquired knowledge is applied to a technical dataset evaluating machine fault conditions. At the end of the chapters of both datasets, the results are summarized and evaluated. The last chapter of the practical part is devoted to the description of the developed scripts in software Matlab 2022b. Part of the work are attachments in which the created FIS models and written scripts are stored.
Vibration analysis using modern online systems
Marek, Vojtěch ; Poliščuk, Radek (referee) ; Hammer, Miloš (advisor)
The diploma thesis solves the issue of vibration analysis using on-line systems. A model of a rotating machine was programmed for implementation, on which the data was subsequently measured. The solution was the analysis of experimental problems for the unbalance of the machine and the determination of the exact defect on the bearing. Different diagnostic methods and environments of the CMS X-Tools analysis application were used to obtain the results. The main result is a functional monitoring system that permanently monitors the condition of the machine and, if necessary, the operator is able to determine the exact failure of the device after analyzing the obtained data. By introducing on-line monitoring systems, major downtime and associated financial losses can be avoided.
Modern approaches to maintenance in engineering practice
Jiroušek, Lukáš ; Konečný, Antonín (referee) ; Hammer, Miloš (advisor)
The thesis deals with maintenance and implementation of modern maintenance approaches in engineering practice. The present thesis focuses on Total Productive Maintenance (TPM). The first part of the thesis defines the general characteristics of maintenance, its division, including an analysis of maintenance types. In the context of maintenance according to the technical condition, the methods of technical diagnostics such as vibrodiagnostics, thermodiagnostics, tribodiagnostics and acoustic diagnostics are also introduced. The second part of the thesis focuses on the philosophy and description of Total Productive Maintenance (TPM) including the individual pillars and the evaluation of Overall Equipment Effectiveness (OEE). The third part deals with the actual practical implementation of TPM at Schaeffler Production CZ s.r.o, with emphasis on autonomous maintenance, e-maintenance and the 7S concept. The final part of the thesis summarizes the benefits and advantages that can be observed by implementing the TPM method in Schaeffler Production CZ s.r.o.
Design of a test stand for vibrodiagnostics education
Doležal, David ; Huzlík, Rostislav (referee) ; Zuth, Daniel (advisor)
The master's thesis on the topic "Design of a Testing Model for Vibrodiagnostics Education" deals with the construction issues of the device. The introductory section provides a systematic analysis, which serves as the basis for the subsequent work. The literature review section discusses Technical Diagnostics with a focus on its subfield, Vibrodiagnostics. It also describes various types of sensors used for vibration measurements. Subsequently, typical faults of rotors and their configuration are presented. The thesis then focuses on the design of the testing device. The design emphasizes simplicity, ease of manufacturing, and minimizing production costs while maintaining functionality and reliability. After the suitable design was proposed, the testing device was manufactured and its functionality was tested in a school laboratory. Several measurements were conducted on different types of faults, such as static unbalance and moment unbalance. The measurements also considered misalignment due to the lack of device calibration. The final part of the thesis evaluates the testing device and provides recommendations for possible improvements. The outcome of the work is the creation of a functional testing model for diagnostic education, which has been tested and is operational.

National Repository of Grey Literature : 57 records found   beginprevious21 - 30nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.