|
| |
|
|
Deformation, stress and safety analysis of the recumbend frame.
Verner, Jan ; Majer, Zdeněk (referee) ; Vrbka, Jan (advisor)
This work contains deformation, stress and safety analysis of recumbent bike frame from company AZUB. After introduction about history, definition of beam and beam assumptions, computational model of the frame was made fallowed the main solution. Three load states was checked - stillnes / uniform ride, deceleration and pedalling. The third one was subjected to deeper analysis. Bending problem in defined location was solved for all states. Inner stress resultans was solved as Von Misses stress, and the safet y was calculated. The fist state was compared with FEM. A program in MATLAB was made, enabeling calculation of user- selected frame geometry and loading.
|
|
|
Testing platform with 3 dof
Spáčil, Tomáš ; Houfek, Lubomír (referee) ; Grepl, Robert (advisor)
This thesis deals with development and construction of parallel manipulator with three degrees of freedom whose assumption of usage is testing tanks for NH3. In this work we are going to investigate the design of the mechanism in Matlab Simulink. Design of the electronic is introduced and also the control program is developed. The result of the work will be a prototype of manipulator.
|
|
|
Engineering Optimization
Kokrda, Lukáš ; Hrabec, Dušan (referee) ; Popela, Pavel (advisor)
The bachelor thesis deals with convex optimization and in particular, it processes a design of the optimal support of a loaded beam. For better understanding of the terms used, the bachelor thesis contains the brief introduction to the convex optimization problems, explanation of the basic therms of ordinary dierential equations and theory of elasticity. When the original model is built, then the results are obtained by computations in the MATLAB software.
|
|
|
Simulation of the energy recovery circuit function
Kubíček, Ondřej ; Ficza, Ildikó (referee) ; Nevrlý, Josef (advisor)
This bachelor thesis describes the design and optimization of a mathematical model for simulating the hydrostatic energy recovery systems. The mathematical model together with the experimental stand should be used to simulate the operating conditions of vehicles using the hydrostatic energy transmission. These include vehicles for collection of municipal waste, public transport vehicles, or for heavy construction machinery. The paper summarizes the current efforts in the design of analytical models, describes the program developed in MATLAB, and is devoted to analyzing the influence of individual input parameters on the output calculation.
|
|
|
Control of sliding window in passenger car
Keprt, Jaroslav ; Vejlupek, Josef (referee) ; Lamberský, Vojtěch (advisor)
This bachelor thesis deals with the installation of power electronics on the PCBdesign and control algorithm for the DC-motor function, which is part of the window motion control system for a passenger car. The paper describes the principles of function state machines that are easily programmed using Stateflow and implementation of control algorithm in the PIC microcontroller. The control program is designed in Simulink and Stateflow its superstructure using Kerhuel Toolbox.
|
|
|
Thermodynamics of ideal gases in Matlab
Zábojník, Jakub ; Klimeš, Lubomír (referee) ; Štětina, Josef (advisor)
In terms of bachelor’s thesis a toolbox of functions for basic computing in thermodynamics with ideal gases and their mixtures was built in environment of computer program MATLAB. Source code of these functions and their description are parts of this thesis. Among others fundamental characteristics of thermodynamic values and terms on which the creation of functions was built, and instruction for calling of functions are mentioned here. Functions in toolbox imaginary are divided to some groups. This dividing is results from principle of thermodynamic calculation. Functions from two neighbouring groups are directly tied together. For lucidity of function sequences and for functions usage and toolbox explanation the examples of using functions examples of functions usage in specific thermodynamic calculations.
|
|
| |
|
|
Green Machine Tools
Harapát, Jan ; Blecha, Petr (referee) ; Hadaš, Zdeněk (advisor)
This work is aimed at energy analysis and the search for the posibility of energy saving in present machine tools. There is mentioned the basic division of machine tools, it describes and analyzes the various methods of energy harvesting systems, and looking for the ways to improve the performance of machine tools.
|
|
|
Experimental analysis of a fixed beam dynamic behavior
Poduška, Jan ; Houfek, Lubomír (referee) ; Březina, Lukáš (advisor)
This thesis is dealing with analysis of dynamic behavior of a fixed beam. An analysis of the applied mathematical model is proposed in the work. The mathematical model is then realized in MATLAB programming environment. Modal frequencies and mode shapes are con- sequently computed and results are compared to those obtained from the experimental modal analysis.
|
guest ::
