|
|
Analysis of Critical Places of Road and Railway Transport Intersections in the Southmoravian Region
Chlup, Daniel ; Ptáček, Petr (referee) ; Libertín, Josef (advisor)
Point of this diploma thesis is analyzing of three railroad crossing controlled by institutions of South-Moravian region, which are chosen by author. For analysis were chosen problematic railroad crossing where happened in last five years traffic accidents with consequences of death. Next criterion of choosing was type of security device. Chosen railroads crossing are representing all types of normally used security devices. That is why was chose railroad crossing with only warning crosses, light security device and last one with light security device with barrier beam. Theoretical part aims on: Basic parameters, dividing, numbering, system of function and marking of railroad crossing. In practical part, there are used mathematical calculations for assessment of safety on chosen railroad crossing and for determination of possibilities of averting a collision of both participants. Corrective measures are made for each railroad crossing taking to account it’s financial conditions. For each railroad crossing is made polygon with help of program Virtual Crash 3.
|
|
|
Motor vehicle accident analysis
Vičík, Petr ; Ambróz, Richard (referee) ; Laurinec, Marián (advisor)
This thesis deals with a comprehensive view of traffic accident enquiry. There are analysed each step of this investigation, starting with evidence gathering (measurements, photography, ect). Further, there are view of clue, damage and personal injury. Thesis shows commonest analysis and reconstructions methods and calculations and specials types of accident (collision with passenger, trucks crash, motorcycles crash). For better understanding, there are mentioned basic principals of physics and problems of forensic engineering.
|
|
| |
|
|
Side collisions of vehicles at an angle of 8° at different speeds
Praus, Tomáš ; Bradáč, Albert (referee) ; Rábek, Vlastimil (advisor)
The diploma thesis deals with the problem of speed determination during tangent collisions of two vehicles. The theoretical part describes the available literature and the preparation of an expert experiment. The practical part describes the experiment itself. Its results are processed and compared with the literature in the theoretical part. The aim of work is to extend knowledge about tangent collisions and reduce the error rate in determining crash in the expert analysis or claims in insurance companies.
|
|
|
Legal Context of Nightime Road Accidents with Pedestrians
Daněk, Vladimír ; Bradáč, Albert (referee) ; Semela, Marek (advisor)
The thesis „Legal Context of Night-time Road Accidents with Pedestrian „deals with the interpretation of legal decisions on traffic accidents caused by the vehicle during the night and where the other participant was a pedestrian. The main aim of this thesis is to find the established limits for the assessing of blame in comparable accident situations in cases of traffic accidents of the vehicle and the pedestrian at the reduced visibility with emphasis on the assessing in relation to the circumstances of the cases from the technical and legal point of view and in relation to the health consequences. Legal interpretations of the law are defined within the theoretical part of the thesis with emphasis on the ones which appear repeatedly in the judicial decisions. Approximately 1530 judicial decisions were studied and analysed in the analytical part, of which 56 were selected, that corresponds to the requirements of this thesis. There are also 5 expert evidences provided by the Institute of Forensic Engineering of Brno University of Technology. In the above mentioned cases there were defined the limits for the assessing of accidents based on which the judicial decision was predicted in context with the defined established limits for the judicial decisions at the top of the court hierarchy.
|
|
|
Crash-Test Data Analysis - Side Impacts
Tillhonová, Veronika ; Ptáček, Petr (referee) ; Bradáč, Albert (advisor)
The diploma thesis deals with crash tests. Many international organizations specialize directly in conducting crash tests. Impact test simulates vehicle collision. The three most common test are front, side, and backstreets. The diploma thesis focuses on side conflicts. Side clashes are characterized by the fact that the first vehicle is damaged at the front and the second in the side. The measured data from these tests was evaluated to obtain the deformation energy consumed for permanent damage to vehicles. Deformation energy was calculated as equivalent to the individual speed of individual vehicles. EES values have been evaluated by various methods used in expert practice and compared. The impact tests were simulated to clarify assistance to experts in the analysis of traffic accidents.
|
|
|
Circumstances and Legal Consequences of Daytime Road Accidents with Pedestrians
Rožková, Magdaléna ; Tylšar, Vladimír (referee) ; Semela, Marek (advisor)
The diploma thesis „Circumstances and Legal Consequences of Daytime Road Accidents with Pedestrian“ deals with the interpretation of legal decisions on traffic accidents causes by the vehicle during the day and where the other participant was a pedestrian. The main aim of this work is to find the established limits for the assessment of fault in comparable accident situations. Basic concepts, as a traffic accident, participants of traffic accidents and the position of an expert in the criminal proceedings, are defined within the theoretical part of the thesis. It also deals with the biomechanical aspects of a pedestrian – vehicle collision and the violation of specific regulations. Approximately 1,530 judical decisions were studied and analyzed in the analytical part, of which 40 were selected, that correspond to the requirements of this thesis. In the analytical part there are also 4 expert opinions provided by the Institute of Forensic Engineering of Brno University of Technology, where the above – mentioned limits for the assessment of accidents were applied, as well as the decision according to the jurisdiction.
|
|
|
Analysis of Critical Places of Road and Railway Transport Intersections in the Southmoravian Region
Chlup, Daniel ; Ptáček, Petr (referee) ; Libertín, Josef (advisor)
Point of this diploma thesis is analyzing of three railroad crossing controlled by institutions of South-Moravian region, which are chosen by author. For analysis were chosen problematic railroad crossing where happened in last five years traffic accidents with consequences of death. Next criterion of choosing was type of security device. Chosen railroads crossing are representing all types of normally used security devices. That is why was chose railroad crossing with only warning crosses, light security device and last one with light security device with barrier beam. Theoretical part aims on: Basic parameters, dividing, numbering, system of function and marking of railroad crossing. In practical part, there are used mathematical calculations for assessment of safety on chosen railroad crossing and for determination of possibilities of averting a collision of both participants. Corrective measures are made for each railroad crossing taking to account it’s financial conditions. For each railroad crossing is made polygon with help of program Virtual Crash 3.
|
|
|
Functionning of the Constitutional Law on the Conflict of Interest in Slovakia: Study 1.168
Syllová, Jindřiška ; Hrušík, Michal
Práce je zaměřena na proces přijímání zákona o střetu zájmů na Slovensku. Smyslem této legislativní normy je zamezit veřejným činitelům ve zneužívání svého postavení, jež může spočívat v kumulování neslučitelných funkcií, nebo v nezákonném obohacování plynoucím ze své veřejné funkce. V práci jsou postupně analyzovány jednotlivé časové úseky, během kterých byly různé podoby předmětného zákona několikrát zamítnuty a posléze přijaty. Kromě samotného legislativního procesu tvorby zákona jsou rozebrány také postoje jednotlivých politických stran a jejich představitelů, dále několik novelizací, jejichž cílem bylo zefektivnit působení zákona v praxi, a nakonec samotný reálný dopad zákona – nakolik jsou dotčené osoby ochotny jeho nařízení respektovat a zda příslušné kontrolní orgány mají dostatek ochoty k řešení sporných případů.
Fulltext:  PDF
|
|
|
STIFFNESS ANALYSIS OF FRONT PART OF THE VEHICLE
Coufal, Tomáš ; Kovanda, Jan (referee) ; Kohút,, Pavol (referee) ; Vémola, Aleš (advisor)
The thesis deals with the front part stiffness of modern vehicles, especially for the use in the field of forensic engineering in the traffic accident analysis. During the traffic accident analysis, an inquiry into the collision between vehicles is carried out which is an integral part of determining the energy loss of the vehicle at the impact, or more precisely the deformation energy expressed in the form of Energy Equivalent Speed (EES). In case of known stiffness of given part of the vehicle and based on the depth of deformation, it is possible to calculate the deformation energy, or more precisely EES corresponding with given damage of the vehicle. In the field of forensic engineering, the values of stiffness of individual vehicle components are not known and therefore, alternative methods are used to calculate the EES, they are outlined in the research part of this dissertation. However, the current methods of EES determination have some limitations when it comes to usability, and therefore, new EES calculation for the front part of the vehicle was designed in the research. It was based on the real crash test results using real stiffness characteristics of the front part of a vehicle. The front part of the vehicle is divided into individual areas and each of these parts is characterised by its own stiffness coefficient. The designed EES calculation can thus be also used for collisions with partial overlapping, taking into account the real stiffness of the damaged part of the vehicle, which was not possible with existing methods. In the research part of this dissertation, a computer programme to calculate deformation energy and EES was processed. It works with individual stiffness characteristics in given areas where the input data are entered by the user and include the depth of permanent front part deformation in individual areas, vehicle weight, the direction of an impact force and the friction coefficient on the contact surface. Considering the fact that the vehicle stiffness is also one of the control parameters at solving collisions in the PC-Crash simulation programme, which is used in forensic engineering practice for the analysis of a collision process, a supplementary computer programme was designed. Based on the above-mentioned input data, the supplementary programme can further calculate data for collision solving in the simulation programme, namely stiffness, restitution coefficient and the vehicle damage stated in the output report of the simulation programme. Based on these data, the expert thus has the opportunity to solve the collision of two vehicles in the simulation programme with as much preciseness as if it was a real collision.
|
guest ::
