Název: LCF behaviour of 301LN steel: coarse-grained vs. UFG-bimodal structure
Autoři: Man, Jiří ; Chlupová, Alice ; Kuběna, Ivo ; Kruml, Tomáš ; Man, O. ; Järvenpää, A. ; Karjalainen, L. P. ; Polák, Jaroslav
Typ dokumentu: Příspěvky z konference
Konference/Akce: LCF8 Eighth International Conference on Low Cycle Fatigue /8./, Dresden (DE), 20170627
Rok: 2017
Jazyk: eng
Abstrakt: Low-cycle fatigue (LCF) behaviour of metastable austenitic 301LN steel with different grain sizes – coarse-grained (14 µm) and UFG (1.4 µm) with a grain bimodality – produced by reversion annealing (RA) was investigated. Symmetrical push-pull LCF tests were conducted on flat sheet specimens at room temperature with constant strain rate of 2×10–3 s–1 and constant total strain amplitude ranging from 0.4% to 0.8%. After completion of fatigue tests a ferritescope was adopted for quantitative assessment of volume fraction of deformation induced martensite (DIM). Microstructural changes, distribution and morphology of DIM in the volume of material were characterized at different scales by colour etching, TEM and EBSD techniques. Experimental data on microstructural changes are confronted with the stress-strain response and with the chemical heterogeneity present in the material.
Klíčová slova: 301LN austenitic stainless steel; deformation induced martensite; low cycle fatigue; reversion annealing; UFG microstructure
Číslo projektu: GA13-32665S (CEP)
Poskytovatel projektu: GA ČR
Zdrojový dokument: LCF8 Eighth International Conference on Low Cycle Fatigue , ISBN 978-3-9814516-5-8

Instituce: Ústav fyziky materiálů AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v příslušném ústavu Akademie věd ČR.
Původní záznam: http://hdl.handle.net/11104/0278867

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-373444


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav fyziky materiálů
Konferenční materiály > Příspěvky z konference
 Záznam vytvořen dne 2018-03-09, naposledy upraven 2021-11-24.


Není přiložen dokument
  • Exportovat ve formátu DC, NUŠL, RIS
  • Sdílet