Název:
Vliv tření na napjatost v okolí čela trhliny zatížené ve smykových módech
Překlad názvu:
Influence of Friction to the Shear Stress State in the Crack-Front Vicinity
Autoři:
Vlach, Jiří ; Hutař, Pavel (oponent) ; Horníková, Jana (vedoucí práce) Typ dokumentu: Diplomové práce
Rok:
2017
Jazyk:
cze
Nakladatel: Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstrakt: [cze][eng]
Cílem této diplomové práce je prozkoumat vliv třecích sil na napjatost a deformaci na čele rovné trhliny zatížené ve smykových módech. První část shrnuje nejdůležitější fakta z oblasti lomové mechaniky. Především pak teoretické poznatky o lomových parametrech (součinitel intenzity napětí, J – integrál) a jejich určení ve výpočtovém prostředí ANSYS Workbench. Druhá část je věnována výpočtovému modelování. Na začátku je vytvořen model materiálu, model geometrie, model zatížení atd. Pak je možné řešit přímý problém nastíněný v úvodu. Výsledkem této práce je posouzení, do jaké míry tření ovlivňuje lomové parametry ve smykových módech II a III.
The aim of this master thesis is to explore the influence of frictional forces to the stress and strain on the straight crack tip loaded in shear modes. The first section summarizes the most important things from the field of fracture mechanics. Especially theoretical knowledge about fracture parameters (stress intensity factor, J – integral) and their determination in computational environment ANSYS Workbench. The second part deals with computational modeling. At the beginning, is created the model of material, the model of geometry, the model of loads, etc. Then it is possible to solve the direct problem outlined in the introduction. A result of this thesis is the assessment of how the friction influences the fracture parameters in shear modes II and III.
Klíčová slova:
ANSYS; J – integrál; Lineární elastická lomová mechanika; metoda konečných prvků; smykové zátěžné módy; součinitel intenzity napětí; trhlina; tření; ANSYS; crack; finite element method; friction; J – integral; Linear elastic fracture mechanics; shear stress mode; stress intensity factor
Instituce: Vysoké učení technické v Brně
(web)
Informace o dostupnosti dokumentu:
Plný text je dostupný v Digitální knihovně VUT. Původní záznam: http://hdl.handle.net/11012/65642