Original title:
Alkalicky aktivované systémy
Translated title:
Alkali Activated Systems
Authors:
Bílek, Vlastimil ; Rovnaník, Pavel (referee) ; Vlček, Jozef (referee) ; Ptáček, Petr (advisor) Document type: Doctoral theses
Year:
2017
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta chemická Abstract:
[cze][eng]
Tato disertační práce se zabývá zejména možnostmi omezování smrštění alkalicky aktivované strusky (AAS), což by spolu s využitím studovaných technologických kalů mohlo umožnit širší praktické uplatnění tohoto perspektivního materiálu. Krom vlivu na rozměrové změny AAS byl studován vliv různých faktorů také na její zpracovatelnost, dobu tuhnutí a mechanické vlastnosti. Získané výsledky byly podloženy instrumentálními technikami, jako jsou izotermická kalorimetrie, rtuťová intruzní porozimetrie, skenovací elektronová mikroskopie a rentgenová difrakce. Dosažené výsledky ukazují, že lze smrštění vysycháním AAS a související tvorbu trhlin snížit kombinací zvýšení dávky vodního skla a sníženého vodního součinitele (w/b), částečnou náhradou strusky úletovým popílkem z vysokoteplotního spalování nebo by-passovými cementářskými odprašky a použitím organických přísad, u nichž byl pozorován velmi významný vliv na hydrataci AAS. Na základě získaných poznatků byly navrženy a s ohledem na smrštění, mechanické vlastnosti a cenu optimalizovány betonové záměsi, u nichž byl aktivátor zcela nahrazen technologickými kaly po výrobě vodního skla. Vybrané betony pak byly zkoušeny také v poloprovozních podmínkách.
This doctoral thesis is focused on the possibilities of alkali-activated slag (AAS) shrinkage reduction, which would together with the use of waste sludge from waterglass production contribute to wider practical utilization of this interesting material. Besides the influence on AAS dimensional changes also effect of various factors on workability, setting time and mechanical properties was investigated. Obtained results were supported by the application of instrumental techniques like izotermal calorimetry, mercury intrusion porosimetry, scanning electron microscopy and X-ray diffraction. The results show the possibilities of reduction of AAS drying shrinkage related to its cracking tendency through the combination of increased dose of waterglass and reduced water to slag ratio (w/b), partial replacement of slag by pulverized fly ash or cement by-pass dust and application of organic admixtures, where significant effect on AAS hydration was observed. On the basis of the obtained results concrete mixtures, where the whole activator was replaced by the waste sludge form waterglass production, were designed and optimized in terms of shrinkage, mechanical properties and price. Selected concretes were also tested in semi-operating conditions.
Keywords:
Alkali-actvated slag; cement by-pass dust; chemical admixture; compressive strength; fly ash; hydration; shrinkage; waste sludge form waterglass production; Alkalicky aktivovaná struska; by-passové cementářské odprašky; chemická přísada; hydratace; pevnost v tlaku; smrštění; technologické kaly po výrobě vodního skla; úletový popílek
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/67539