National Repository of Grey Literature 813 records found  1 - 10nextend  jump to record: Search took 0.03 seconds. 
Onboard computer for electric scooter
Stříteský, Vladimír ; Burian, František (referee) ; Kříž, Vlastimil (advisor)
The aim of this thesis is clarify construction of onboard computer for electric scooter. There is description of components, from which the electric scooter is built. Within this thesis a computer simulation of accelerating scooter is created. Based on the simulation three possible ways of controlling the electric drive were proposed. Then thesis describe parts from witch control system is composed. Onboard computer and support circuits are described in more detail and explained their functions. Description of the created software is in the final part.
The Continuity Indicators Calculation of E-ON ČR Distribution Network Segment
Girga, Eduard ; Černý, Pavel (referee) ; Paar, Martin (advisor)
The aim of this master’s thesis is calculation and analysis of reliability indicators of the company E.ON Česká republika, s.r.o. distribution network in the south Moravia territory (area of former Jihomoravská energetika) for the period of one year, from 1st November 2008 to 31st October 2009. We consider events incurred on overhead or underground lines of level of high voltage or directly connected with these lines. Events originated from extensive disaster interruption of electric energy supply caused by particularly unfavourable external effects are not considered, because network components can not be efficiently dimensioned on those influences. Known aspects of the events are time of origin, time duration, place and cause of failure inception. Analysis of reliability indicators is accomplished according to different point of view. The first aspect is the hours of day, during which the event lasted. The second aspect is the hours of day, during which the event incurred. The third one focuses component pointed as reliable for the origin of the event. The last standpoint is percentage load of the line outlet, on which the event occurred. We can ordain this load as the proportion of current flowing through the line outlet in the time of event inception and of the value of maximum current set up on the protection of the line outlet. Indications mentioned in the last sentence were searched in the dispatcher centre thanks to graphical interface of application RIS JME Brno. In the theoretical part of the work there is described the structure of distribution network and its fundamental influence on the continuity of electric energy supply, the ways of evaluation and increasing of electric energy supply reliability, regulation of continuity of electric energy supply with emphasis on regulation in the Czech Republic valid until 26th February 2010 and since 27th February 2010. The last theoretical part focuses on definition of failure and differentiation of failures according to various aspects.
Process control of a distillery
Sejkora, Martin ; Kopečný, Lukáš (referee) ; Veselý, Libor (advisor)
This master‘s thesis deals with the design of a control system for a distillation column. It deals with the issue of distillate production and acquaints the reader with the necessary knowledge that is necessary to understand the purpose of the work. The practical part of the work presents a specific distillation column, the means for its control and the method of implementation of the control system, then the visualization of the control system and the method of control. Part of the work is the evaluation of the results and benefits of the work.
Control system for equipment using renewable energy sources
Novotný, Jan ; Bradáč, Zdeněk (referee) ; Benešl, Tomáš (advisor)
The work deals with design of power and control electronics for water micro source in island network. In the general part the readers are acquaints with the issue of renewable energy sources and describes commercially produced micro sources. The practical part deals with the design of its own control system and power electronics using its own control system or PLC for water micro source. The microcontrollers were used for the implementation of the control system, for which the program part was created.
Vertical worm conveyor
Sordyl, Martin ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The aim of this thesis is realization of functional calculation, design creation of vertical worm conveyor according to required parameters and consideration of transported materials. Here is realized calculation of main parts of the conveyor, approximate transport performance, design of propulsion, gear, conjuction and regulatory unit, emplacement of worm and strength control of functional parts of the machine. This thesis is composed of technical report and drawings.
Control of HVAC equipments
Zaoralová, Kateřina ; Weiglhofer,, Willy (referee) ; Rubina, Aleš (advisor)
The aim of the diploma thesis is application of the topic Control of HVAC equipments. The thesis is divided into three part – A, B, C. The first theoretical part deals with controlling/regulation in general, it focuses on controlling/regulation of HVAC equipments and it describes ways of air volume flow measurement, which relates to the third experimental part. The second part is focused on design of HVAC system in inpatient ward and fit-out for employees. In the third part was realized verification of air flow volume controller in two chosen buildings, whence in one there weren´t fulfilled manufacturer´s requirements and in the second one they were fulfilled. In conclusion there were compared measured values.
Steam turbine
Čípek, Petr ; Škorpík, Jiří (referee) ; Fiedler, Jan (advisor)
The aim of the thesis is to design a high-speed steam turbine as a small energy source. Steam turbine consists of a high-pressure, a medium-pressure and a low-pressure part with a removable condensing module. High-pressure part is designed to perform a single-stage radial turbine with axial steam outlet. The work also includes the layout of the modules and sections. To design individual parts are used steam table „X-steam“.
Project of the photovoltaic system
Ševčíková, Kateřina ; Půčková, Helena (referee) ; Kotlík, Josef (advisor)
The diploma thesis deals with elaboration of project solar thermal and photovoltaic solar systems for all-season service. The theoretical part focuses on the general description of the solar thermal and photovoltaic systems, legislation of renewable sources in the Czech Republic and the status of photovoltaics in the Czech Republic. The experimental part deals with the design of measures for energy saving by using solar energy systems. These measures are proposed for construction of houses in Podolí u Brna, especially on extra-family house. The aim of the work is to make a proportioning, choosing the right parts and calculating the economic and ecologic balance. Finally, thesis gives recommendations for further action in saving energy in houses in Podolí u Brna.
Design of DC motor drive for 3D printer stepper motor drive replacement
Králík, Jan ; Spáčil, Tomáš (referee) ; Chalupa, Jan (advisor)
The subject of this thesis is to create a module for control DC motor using signals which are used to control a stepper motor. The module will be implemented into existing 3D printer. This work also includes testing of a new drive and its comparison with the prior stepper drive. The thesis also contains comparison of performance of both drives in terms of quality 3D printing.
Implementation of PSD controller into microcontroler MCF52233
Lang, Stanislav ; Holek, Radovan (referee) ; Macho, Tomáš (advisor)
The goal of my bachelor thesis is the project and realization of a digital regulator, including the possibility of user’s settings. The first two chapters, which present a theory and a survey of the problem of digital regulation, offer an introduction as far as the used hardware (32-bit microcontroller M52233 from the company Freescale) is concerned. The main part of my thesis deals with the description of concrete implementation of regulation algorithms into the selected hardware as well as the communication with the regulation unit and the selection and basic configuration of the peripheral used.

National Repository of Grey Literature : 813 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.