|
| |
|
|
Methodology of identification of revisions and inspections of technical equipment for a manufacturing company based on the requirements of ISO 45001
Valenta, Jakub ; Jandová, Kristýna (referee) ; Bača, Petr (advisor)
This work deals with the issue of inspections and revisions of technical equipment according to safe operation standards on the basis of OSH and FP requirements. In the introduction, these fields of work safety and fire protection are described, which will be used in later parts of the work. Subsequently, the term „technical equipment“ and subcategories of this issue are defined, with each of the subcategories being specifically approached. As a result, the thesis describes why it is necessary to regularly inspect the technical equipment, while the individual types of inspections are subsequently defined. This is accompanied by the distribution of the person’s rights to carry out individual inspections and the distribution of responsibility for the inspections carried out. The acquired knowledge is then used to create a model of the process of regulation of inspections and revisions and to create an overview of periodic inspections and revisions of technical equipment for a manufacturing company. This model and review of inspections are then considered the output of this bachelor’s thesis.
|
|
|
Revision of belt conveyor drive
Kledus, Erik ; Hájek, Vítězslav (referee) ; Veselka, František (advisor)
The theme of the bachelor work is the revision of the conveyor belt drive. It contains a description of the belt drive, its distribution and possible malfunctions. It also contains the results of the revision. It deals with the formation of static charge and its elimination. Bachelor work also includes measurements and tests performed on conveyor drive.
|
|
|
Process a review of the specified electrical equipment
Lanc, Rudolf ; Mach, Martin (referee) ; Veselka, František (advisor)
The revision of the electrical equipment means verifying the state of the equipment concerning its safety. The aim of the Bachelor Thesis is the revision of the selected electrical equipment. The particular equipment will undergo a revision, measurements, supervisions, and tests, which are subject of the norms. A revision report will be issued as a result of the established facts, in which possible failures will be described. Further on eventual risks will be explained and techniques how to eliminate them proposed.
|
|
|
Automatic visual check of mating complete cars
Bureš, Jan ; Ing.David Hrdlička (referee) ; Bradáč, František (advisor)
This diploma thesis deals with concept of automatic inspection workplace for fitting car at assembly inspection line at TPCA as a car manufacture company. Theoretic part is focused on the assembly inspection at TPCA and also presents a current optical inspection at the industry with regard to the topic of this thesis. Practical part contains analysis of the current condition and workplace concept of automatic inspection and measuring method of complete car. Thereafter it brings the technical and economical contributions for this company when my concept implemented.
|
|
|
The Czech Environment Inspectorate
Kremplová Mendrygalová, Nina ; Sobotka, Michal (advisor) ; Derlich, Stanislav (referee)
1 The Czech Environmental Inspectorate Abstract This Master's thesis describes and analyses the Czech Environmental Inspectorate, a specialized supervisory authority that oversees compliance with legal regulations and administrative decisions rendered by the public administrative authorities in the area of the protection of the environment. The partial aim of this thesis is to introduce the Czech Environmental Inspectorate and to highlight its irreplaceable role at environmental protection in the Czech Republic. The main aim of this thesis is to describe and analyze the supervision activity of this authority and its follow-up measures, which are assigned to this authority by the legal regulation, and to highlight the changes brought by two fundamental legislative changes, namely the adoption of Act No. 255/2012 Coll., on administrative control (Control Code) and Act No. 250/2016 Coll., on administrative offenses, that influenced this authority. This thesis consists of four main chapters. The first and second chapters of this thesis are the introductory chapters. The first chapter highlights the current importance of environmental protection and specifies the role of administrative supervision as an essential tool to protect the environment. The second chapter presents the basic historical context of the...
|
|
|
Project
Malý, Martin ; Kratochvílová, Erika (referee) ; Šlanhof, Jiří (advisor)
The aim of this work is the processing of the technological project for the ,,Skladová hala v Měříně“, which addresses the preparation and organization of construction. Construction technology the project involves the processing of time plans, economic evaluation, design of pumping sources for construction, working procedures, construction site equipment, and design of major machines and mechanisms. Further, it is processed a detailed technological regulation and inspection and test plan for a prefabricated reinforced concrete skeleton. All technological procedures are processed with regard to work safety and environment.
|
|
|
Modern Maintenance Procedures for Airframe Inspections for General Aviation Category Aircraft
Koštial, Rostislav ; Petrásek, Miloslav (referee) ; Třetina, Karel (referee) ; Hlinka, Jiří (advisor)
Aircraft scheduled maintenance requirements are rapidly extending and developing due to rapid evolution of small aircraft. This evolution leads to implementation of until recently exclusively airliner class maintenance standards. In the field of general aviation and FAR 23/ EASA CS-23 especially, preventive maintenance based on part replacing or repairing is still dominant. DAMAGE TOLERANCE philosophy implementation into an aircraft design influences maintenance procedures, which are adjusted to older SAFE LIFE philosophy. Aircraft manufactures are developing new ways, how to integrate requirements of damage tolerance application into scheduled maintenance procedures. Huge airliner manufactures (FAR 25/ CS-25) are using the ATA MSG-3 intelligent maintenance approach based on inspection. This dissertation thesis develops intelligent scheduled maintenance methodology, utilizing ATA MSG-3 procedures, expert knowledge and Multiple Criteria Decision Analysis (MCDA).
|
|
|
Quality of gastronomical services
Hupik, Andrea ; Jenčková, Jiřina (advisor) ; Daňková, Zdenka (referee)
Bachelor thesis deals with the quality of services offered in gastronomy. The aim of this work is to analyze the perception of gastronomic service quality and the subsequent creation of proposals for their possible improvement. In theoretical part of the thesis are defined terms as gastronomy, gastronomical services and quality. Subsequently, their development and history are also described. The practical part consists of a research about perception of the quality of gastronomical services and the interview with professional cook Roman Vaněk. Included are also suggestions, which can possibly improve the quality in gastronomy and which are based on results of the research and interview findings.
|
|
|
Specifics of assessment of old concrete structures
Mička, Michal ; Žítt, Petr (referee) ; Cikrle, Petr (advisor)
The bachelor thesis deals with evaluation of properties materials concrete structures of former textile factory Vlněna from the 19th century in Brno. The content of this work is divided into the theoretical and practical part. The theoretical part deals with the description of the methods used in the research of reinforced concrete structures, comparison of the types of beams used in the past with used today and unlike the principles of the design of reinforced concrete structures in the 1920s and 30s of the 20th century compared to the present time. There are also described components, properties and technologies of concrete production in the period between the war and the comparison with the present time. The practical part consists of on-site examinations and sampling. A large part consists of the evaluation of laboratory tests on the test samples taken from the solved part. A total of 24 test samples were performed. It also compares the strength of the concrete reinforcement with the reinforcement used today.
|
guest ::
