|
|
BMW Up-to-date SI-engines
Šroba, Roman ; Prokop, Aleš (referee) ; Dundálek, Radim (advisor)
The Bachelor’s thesis deals with modern BMW spark-ignition engines. It provides an overview of current automotive design solutions in gasoline engines. The work is focused on three main areas. The first part describes the latest and unconventional technologies used in current BMW spark-ignition engines. The second part is focused on design solutions in specific aggregates, their evaluation or comparison with contemporary competition. The last part describes the hybrid vehicles and the car manufacturer's response to emission standards with focus on the waste heat of a car.
|
|
| |
|
| |
|
|
Rocker for Formula Student Vehicle
Šprta, Petr ; Prokop, Aleš (referee) ; Janoušek, Michal (advisor)
This thesis deals with a prototype of the rear suspension rockers of the racing monopost Dragon 10th generation, which is being developed at the Brno University of Technology within the international educational project Formula Student. Based on the research, the technology method of casting has been chosen for this purpose. The input for the prototype of the rocker arms is based on the impacting forces and suspension points given by kinematics of the vehicle. Based on these facts, topology optimization of the shapes has been conducted and the components have been modelled accordingly. Followingly, optimization focused on minimizing weight, deformation and stress were conducted using the reverse loading of modelled components. The last part of this thesis is concerned in the comparison of rear rockers of the last year‘s monopost Dragon 9. Taking into consideration the change of the concept, the mechanical properties of rockers are slightly better.
|
|
|
Carbon Fiber Formula Student Driveshaft
Bartoška, Vojtěch ; Prokop, Aleš (referee) ; Janoušek, Michal (advisor)
The work contains summary of possible design solutions of the drive shafts for Formula Student vehicle. Choice of the composite shaft design and its design, including proposal of tripod and bonded joint. Design verification by static and dynamic testing. Comparison of composite drive shafts with steel drive shafts.
|
|
| |
|
|
Design of gear coupling
Kundýsek, Michal ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
The content of the diploma thesis is the construction of a toothed coupling for general use. The coupling was first described in order to acquaint the reader with the issue of the coupling. After approaching the issue, a practical part was created, which dealt with the conceptual design of the gear coupling. Two gear coupling designs have been developed to take into account as many customer requirements as possible. After making the model, strength calculations were created to verify the functionality of the coupling. The calculations mainly concerned important components for the operation of the clutch.
|
|
|
Casted Formula Student Upright
Doležal, Tomáš ; Prokop, Aleš (referee) ; Janoušek, Michal (advisor)
Bachelor thesis deals with a design of casted upright for Formula Student vehicle Dragon X. Casting method used for the purpose of this thesis was selected by review of relevant scientific literature. The upright was then structurally designed and strength calculations were made. Main criterion of the design is minimum compliance with meeting the required weight. Final design is compared with the design of the previous generation of vehicle.
|
|
|
Influence of interference fit on Rolling Bearing life
Tetour, Stanislav ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
Master thesis is focused on the influence of interference fit on rolling bearing life. The first part of thesis deals with the theoretical knowledge, that is necessary for the solution. The influence of interference fit was investigated of inner ring on shaft and outer ring in housing bore for recommended tolerance classes. Interference fit was solved on cylindrical roller bearing and tapered roller bearing. Analytical and numerical approach was used for the solution. A static analysis of bearing was made using program ANSYS Workbench in numerical section. The output of analysis was maximum shear stress under the contact surface, which result is contact fatigue of bearing. Bearing life was determined by life factor, which indicates bearing life with interference fit compared to bearing without interference fit.
|
|
|
Injection Systems of Commercial Vehicles
Horníček, Petr ; Prokop, Aleš (referee) ; Dundálek, Radim (advisor)
In this thesis I describe the fuel system components and their function. Furthermore, there is an overview of the most commonly used injection systems with the principle of operation, advantages and disadvantages of the embodiment. There is also processed the issue of the emission standards. This thesis contains a list of the world's leading manufacturers of commercial vehicles and their injection systems. Finally there is a reflection on the future development of injection systems.
|
guest ::
RSS feed.