|
|
Apartment house in Trutnov
Taclík, Milan ; Pilný, Ondřej (referee) ; Smolka, Radim (advisor)
The aim of the bachelor’s work is composition of project documentation for the constrution building of apartment building in Trutnov. Object is situated on the cadastral area of Trutnov, number of builing plot is 2656/6. Builing plot is locate in bulit-up area. Terain is sloping. In the apartment building there are 4 floors with thirteen residential units. On the first floor there are two flats, a cleaning room, a room for an administrator, an exchange room and a cellar. In the above-ground floor there are situated flats. The main entrance to the building is on the second floor. Structural system of this builing is wall system. External walls are made of ground brick blocks with mineral insulation bonded with a walling adhesive. Internal masonry is made up of acoustic brick blocks. The building haven´t external thermal insulation. The facade is made of heat-insulating plaster with a silicate top layer. Floor structure is designed as a cast-in-place two way reinforced slab. Staircase and lift shaft are designet as cast-in-place reinforced contstruction too. Roofing of objekt is composed of flat roof. Floor construction are designed as floating floor.
|
|
|
Object of civic amenities
Zachovalová, Jana ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
Submitted diploma thesis prepares project documentation for the construction of a hotel building with a restaurant, which is located in the central built-up area of the town called Letovice situated in the South Moravian region. The solved building is partially basement with three above-ground floors covered by a flat vegetation roof. The hotel is designed with 23 accommodation units with a total capacity for 52 persons (including 4 persons with reduced mobility on the 2nd floor) and a restaurant for 98 guests, a bathroom and a kitchen. Guest rooms are located in the 2nd and 3rd floors. There are representative areas of the hotel in the form of an entrance hall with reception, areas for hotel management and a restaurant with a kitchen including social facilities for employees on the groud floor. There is a technical background of the building and maintance working room in the basement. The building comlies the requirement for low-energy standard buildings by combining a quality construction solution with thermal insulation of the building cover and other technological solitions. The overall character of the building is underlined by its architectural design in the form of partial greening of the facade. This solution is combined with large glazed areas giving a feeling of spaciousness and evocative cleanliness to the building.
|
|
|
Family House with Aerobics and Fitness Studio
Nekorancová, Anna ; Pilný, Ondřej (referee) ; Brzoň, Roman (advisor)
The subject of this bachelor's thesis was to elaborate project documentation for a new family house with the Aerobics and Fitness Studio establishment. The building is divided into two functionally separate parts, a family house for a family of four and the Aerobics and Fitness Studio facility. The building has two floors above ground and one underground and it has partial basement. The building is located in the village, where the construction of houses and infrastructure is planned to be. The skeleton of the building consists of a combined structural system of vertical walls made of ceramic blocks and the connection of a reinforced concrete ceiling structure, where it was necessary to design reinforced concrete columns with gutters as a supporting structure for large overlaps. The roof of the building consists of a flat roof what is designed as a vegetation roof. The family house also includes a garage, which is located on the first underground floor with a capacity of three parking spaces. The emphasized attention was paid to technical requirements, functionality, purposefulness, and housing demands during the processing of project documentation. Part of the project was the assessment of fire safety of the building, thermal technical assessment, building design solution, architectural-building solution, evaluation in terms of building physics.
|
|
|
New station of the Czech Mountain Rescue Service in Ramzová made of hempcrete
Harazin, Tomáš ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The aim of this project is a design of a Mountain Service station in Ramzová located in the Protected Landscape Area Jeseníky. It is a two-storey rectangular building with a gable roof. It has a light wooden frame with hempcrete thermal insulation with diffusely-open constructions. The roof and the facade are covered with split larch shingles. All materials used are selected with respect to their environmental impact in combination with modern approaches. The building is designed as a near-zero energy building, including an air handling unit, a heat source in the form of an air-water heat pump, as well as photovoltaic panels placed vertically on the structure in the northwestern part of the property. The work also includes research into the properties of hempcrete. Laboratory measurements of a heat transfer coefficient and compressive strength of the material were made on samples of hempcrete and are implemented to the project. The result is a building using today's most advanced technology combined with traditional natural construction.
|
|
|
Apartment house in Uherské Hardiště
Svízela, Martin ; Pilný, Ondřej (referee) ; Čuprová, Danuše (advisor)
The bachelor's thesis deals with the construction and layout of a newly built apartment building in Uherské Hradiště on plot no. 885/1 in Zahrádky Street. This is a basement building with above-ground floors. There are 10 flats on the upper floors in the basement there are common areas of home equipment and cellars for individual flats. The ground floor consists of 3 residential units a cleaning room and a carriage house. There are 4 residential units on the second floor and there are on the third floor 3 housing units. The building is based on simple concrete foundation strips. The vertical construction system consists of ceramic blocks in the above-ground part and BEST formwork in the underground part the horizontal construction is made of ceramic concrete. The roof of the building consists of a single-skin flat roof. The land on which construction is planned is grassy over the entire area. The entrance to the building is situated on the east side. The projected accommodation capacity is for 24 people. Adjacent to the building is a parking area about 17 parking spaces, of which 1 is for people with reduced mobility.
|
|
|
Mixed-use Building in Ledeč nad Sázavou
Nevím, Tomáš ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The master thesis designs a mixed-use building in Ledeč nad Sázavou. The thesis consists of three parts. First part presents the project documentation of architectural-construction. Second part proposes the technical equipment of the building. Third part is assessment of the designed building by methodology for multicriteria evaluation of buildings SBToolCZ. The building is located in undeveloped and slightly sloping land. The building has three above-ground floors. There are three different operations in the building, which are a café and an electrical shop and an office part. There is a café, an electrical shop, technical and storage facilities on the first floor. The second and third floor is an office part and company apartment. Structurally, the building is solved by a two-wax load bearing system. The building is founded on footing and foundation slab. Load bearing vertical elements are walls, columns and posts. Externall wall is designed from ceramics block with and mineral insulation. Horizontal load-bearing structures are designed as cast-in-place reinforced slabs. The building has a flat roof. In the building is air condition and cooling system and heating. Part of electricity demand is covered by photovoltaics on the roof. All drawings and visualization are designes in software ArchiCAD.
|
|
|
Civic amenities building
Čaplová, Michaela ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of my master ‘s thesis is to elaborate the project documentation of kindergarten as nearly zero – energy buildings. The project consists of three parts. The first part (main part) presents the civil engineering design of the building. Kindergarten is single storey-building. The vertical load-bearing structures are designed from lime-sand blocks (above - ground floor) and the hollow concrete blocks filled with C20/25. Horizontal load-bearing structures are designed from the prestressed Spiroll floor panels. The roof consists of a flat roof with extensive greenery. The second part presents technical equipment of buildings. The third part presents acoustic assesment outside Kindergarten. The building site contains also an outdoor playground. I am using AutoCad software for drawing and Deksoft to calculate Energy Performance Certificate. All structures comply with the regulations and valid standards.
|
|
|
Flat house - Blatná
Hess, Samuel ; Pilný, Ondřej (referee) ; Kolář, Radim (advisor)
The bachelor's thesis deals with the design of a new apartment building in the suburbs in the town of Blatná. Apartment building have 4 above ground floors, in which there are 8 housing units. On the 1st floor there are cellars, technical premises, carriage house, dryer and common room. On the 2nd-4th floor there are housing units. The whole building is connected by a two-arm staircase and an elevator, which is located between the staircase. Next to the building there are 9 parking spaces. The construction is based on foundation strips. The supporting system is wall-mounted. The ceilings and the roof are formed by a monolithic reinforced concrete ceiling. The building is covered with a flat single-skin vegetation roof. The thermal insulation of the building will be solved by peripheral ceramic blocks porotherm with mineral wool filling.
|
|
|
Residential house
Staňková, Pavla ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The subject of this bachelor thesis is the design of a residential building. The building is situated on the northeastern outskirts of Boskovice. The land selected for construction is located in the cadastral area of Boskovice. The object is solved as stand-alone, with two above-ground floors, without basement. Residential house is designed for housing. There are 4 apartments. Each apartment is complemented by a garage inside the building. The entrance to the buildings is from the northwest side of the property. The perimeter of the house will be made of Porotherm 30 Profi ceramic blocks. The ceiling structure is made of reinforced concrete prestressed ceiling panels SPIROLL. The residential building is covered with a flat, single-skinned vegetation roof.
|
|
|
Apartment Building in Jablonné nad Orlicí
Tejklová, Šárka ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
At the almost flat plot number 411/3, cadastre unit Jablonné nad Orlicí was designed a new apartment building with an service establishment. Local zoning plan of the village defines the plot as a buildable area. The building has one basement and three floors. There are 7 dwelling units and a hairdresser's in the building. The living area and the service establishment have separate entrances. The building is designed with wheelchair access. On the first floor there is an accessible two-bedroom flat with kitchenette and hairdresser's, on the second floor there are two two-bedroom flats with kitchenette and two studios apartment, on the third floor there are two three-bedroom flast with kitchenette. In the basement there is cellar boxes and technical facilities of the building. The foundations are made of a system of foundation strips made of plain concrete, external wall of floors is walled with clay blocks and insulated with external thermal insulation composite system (ETICS). Staircase and floor structures are made of reinforced cast-in-place concrete. The building is roofed with a non-walkable flat roof.
|
guest ::
