|
|
Bandsaw Control System
Filipský, Dalibor ; Arm, Jakub (referee) ; Jirgl, Miroslav (advisor)
This paper describes the design of a control system for a band saw. Content of work can be divided into five parts. The first part contains introduction to the basic functions of a band saw, it’s division and structures. Furthermore, the construction and parameters of a band saw created by an amateur and to which the control system is designed. The second part is dedicated to the design and creation of simulators for bandsaw function, both manual control mode and the automatic mode. The third part deals with the analysis of the risks associated with safety and operational reliability of the device. The fourth part focuses on the design of control algorithms for programmable controller and creating a suitable simulator that will represent a real physical device. In fifth part, designed algorithm is applied and tested on created simulator for bandsaw.
|
|
|
Design and Implementation of a System for Checking the Boxes Completeness
Filipský, Dalibor ; Pásek, Jan (referee) ; Jirgl, Miroslav (advisor)
This thesis describes the design and implementation of a system for checking the boxes completeness. Thesis is divided into several parts. The first part includes an introduction into the manufacturing process and also devices, for which the system is designed. The second part consists of system design and a description of hardware components used for the system. The third part deals with the creation of a scheme used for connection an electrical switchboard. The fourth part is focused on a design of mechanical constructions, such as construction plan used for vision sensors connection, lighting system and design mechanical parts of stopper. A simulator of the system for checking the boxes completeness is described in the fifth part. It is used for a demonstration of functionality and controllability of the system. The sixth part deals with enabling of a communication between particular sub-systems, such as vision sensors, control panel and control system. The seventh part is focused on creation of the software required for the control system, HMI panel and deals with the configuration of pair vision sensors. In the final part there are some illustrations of designed system in real process of manufacturing.
|
|
|
Data Acquisition from the Deep Horizons of the Rožná Mine - Final Report (Technical report SÚRAO č. 464/2020)
Bukovská, Z. ; Švagera, O. ; Chabr, T. ; Leichmann, J. ; Sosna, K. ; Souček, Kamil ; Vavro, Martin ; Zuna, M. ; Navrátil, P. ; Bohdálek, P. ; Bošková, M. ; Dobeš, P. ; Filipský, D. ; Franěk, J. ; Galeková, E. ; Georgiovská, Lucie ; Hanák, J. ; Havlová, V. ; Hlisnikovský, K. ; Holéczy, D. ; Jankovský, F. ; Jaroš, M. ; Jelínek, J. ; Knésl, I. ; Koucká, L. ; Kryl, J. ; Kříbek, B. ; Kubeš, M. ; Kubina, Lukáš ; Kučera, R. ; Kukutsch, Radovan ; Laufek, F. ; Mixa, P. ; Mozola, J. ; Násir, M. M. ; Palát, J. ; Patočka, M. ; Pořádek, P. ; Rosendorf, T. ; Soejono, I. ; Staš, Lubomír ; Vavro, Leona ; Veselovský, F. ; Vorel, J. ; Waclawik, Petr ; Wertich, V. ; Zajícová, Vendula ; Zelinková, T.
Final Report of the Project „Data Acquisition from the Deep Horizons of the Rožná Mine“ presents the results of the study of rock mass properties with respect to the presence of a significant tectonic zone. The study focused on the change of properties in the vicinity of the so-called first zone of the Rožná deposit, but also on the change of these properties with a depth of 12–24. floor of the former mine, 550-1200 m below the surface. Realized works included geological, petrographic, geochemical description of the rock environment, geophysical work (esp. seismics), study of physico-mechanical properties of rocks, transport experiments and deposit revalidation of the Rožná deposit. All work was carried out for the purpose of describing the studied zone and its manifestation with an emphasis on ensuring the safety of the potential location of the deep geological repository.
|
|
|
Acquisition of deep data from horizonts of Rožná mine - Technical report for 2019
Bukovská, Z. ; Bohdálek, P. ; Buda, J. ; Dobeš, P. ; Filipský, D. ; Franěk, J. ; Havlová, V. ; Holéczy, D. ; Chabr, T. ; Jelínek, J. ; Jelínek, J. ; Knésl, I. ; Kryl, J. ; Kříbek, B. ; Laufek, F. ; Leichmann, J. ; Navrátil, P. ; Pořádek, P. ; Soejono, I. ; Sosna, K. ; Souček, Kamil ; Švagera, O. ; Vavro, Leona ; Vavro, Martin ; Veselovský, F. ; Waclawik, Petr ; Zuna, M.
This report summarizes work that has been done during the second phase of the third and fourth\nwork package of the tender Acquisition of deep data from horizons of Rožná mine. It contains\ndescription of analytical work performed in laboratory and in situ, documentation in the mine and\n3D modelling.
|
|
|
Obtaining data from the deep horizons of the Rožná Mine
Bukovská, Z. ; Bohdálek, P. ; Buda, J. ; Dobeš, P. ; Filipský, D. ; Franěk, J. ; Havlová, V. ; Chabr, T. ; Knés, I. ; Kryl, J. ; Kříbek, B. ; Laufek, F. ; Leichmann, J. ; Navrátil, P. ; Pořádek, P. ; Rosendorf, T. ; Soejono, I. ; Sosna, K. ; Souček, Kamil ; Šustková, E. ; Švagera, O. ; Vavro, Leona ; Vavro, Martin ; Veselovský, F. ; Waclawik, Petr ; Zuna, M.
This report summarizes the work and partial results made under the Public Procurement Obtaining Data from the deep horizons of the Rožná Mine in the first phase of the third and fourth subdivisions from February to November 2018. These are in particular technical works (boreholes, access to corridors),seismic measurements, sampling for laboratory analysis (physical-mechanical properties of rocks, breakage fills, bearing revalidation), structural characterization of the rockanalytical work on all samples taken. Parallel to these works3D models are being prepared, especially data preparation for modeling.
|
|
|
Obtaining data from the deep horizons of the Rožná mine - realization project of work
Švagera, O. ; Bukovská, Z. ; Souček, Kamil ; Vavro, Martin ; Waclawik, Petr ; Sosna, K. ; Havlová, V. ; Zuna, M. ; Jankovský, F. ; Filipský, D. ; Chabr, T. ; Navrátil, P. ; Mixa, P. ; Soejono, I. ; Laufek, F. ; Kříbek, B. ; Leichmann, J. ; Zeman, J.
Realization project summarizes the planned work, its progress and continuity within the environment of Rožná I mine in the extent of the procurement „Získání dat z hlubokých horizontů dolu Rožná“ which is being compiled by Hluboké hluboké horizonty Rožná group. The final goal is to clarify the significance and spatial influence of major tectonic fault on surrounding rock mass. The results will help to clarify localization and safety issues of the potential deep underground repository, especially with respect to the Kraví hora locality.
|
|
|
Design and Implementation of a System for Checking the Boxes Completeness
Filipský, Dalibor ; Pásek, Jan (referee) ; Jirgl, Miroslav (advisor)
This thesis describes the design and implementation of a system for checking the boxes completeness. Thesis is divided into several parts. The first part includes an introduction into the manufacturing process and also devices, for which the system is designed. The second part consists of system design and a description of hardware components used for the system. The third part deals with the creation of a scheme used for connection an electrical switchboard. The fourth part is focused on a design of mechanical constructions, such as construction plan used for vision sensors connection, lighting system and design mechanical parts of stopper. A simulator of the system for checking the boxes completeness is described in the fifth part. It is used for a demonstration of functionality and controllability of the system. The sixth part deals with enabling of a communication between particular sub-systems, such as vision sensors, control panel and control system. The seventh part is focused on creation of the software required for the control system, HMI panel and deals with the configuration of pair vision sensors. In the final part there are some illustrations of designed system in real process of manufacturing.
|
|
|
Bandsaw Control System
Filipský, Dalibor ; Arm, Jakub (referee) ; Jirgl, Miroslav (advisor)
This paper describes the design of a control system for a band saw. Content of work can be divided into five parts. The first part contains introduction to the basic functions of a band saw, it’s division and structures. Furthermore, the construction and parameters of a band saw created by an amateur and to which the control system is designed. The second part is dedicated to the design and creation of simulators for bandsaw function, both manual control mode and the automatic mode. The third part deals with the analysis of the risks associated with safety and operational reliability of the device. The fourth part focuses on the design of control algorithms for programmable controller and creating a suitable simulator that will represent a real physical device. In fifth part, designed algorithm is applied and tested on created simulator for bandsaw.
|
guest ::
RSS feed.