National Repository of Grey Literature 34,217 records found  1 - 10nextend  jump to record: Search took 0.80 seconds. 

Crack stability condition at the interface between two polymer materials
Zouhar, Michal ; Hutař, Pavel ; Náhlík, Luboš ; Ševčík, Martin ; Knésl, Zdeněk
The aim of this work is to study the behaviour of crack with its tip at the interface of two polymer materials. The numerical model of cracked bi-material tension specimen is investigated and a stability criterion was tested. Usually a stability criterion based on general stress concentrator needs the relation between critical value of the generalized stress intensity factor and critical value of the stress intensity factor (fracture toughness). This relation is a function of elastic mismatch between particular materials, fracture toughness of the main material and critical distance d. Estimation of d is usually not straightforward and different authors use different approaches for its determination. Therefore main aim of this study is mutual comparison of published approaches for d estimation and to quantify their effect on the critical loading value. The results of this study can lead to better lifetime prediction and design of layered structures.

Mica modified electroinsulating varnishes
Mrkos, Pavel ; Frk, Martin (referee) ; Rozsívalová, Zdenka (advisor)
This master´s thesis deals with influence of mica content on the electrical properties of electrical insulating varnishes, particularly in the polyester resin Dolphon XL 2102. It focuses on diagnostic methods and testing the properties of electroinsulating varnishes. Examines the potential benefits of micronised mica in order to achieve better electrical insulation properties of the system compared to the matrix. The composite material consists of polyester resin Dolphon XL 2102, which is modified different mass percentage of micronized mica. The results of this project are frequency dependencies of real and imaginary parts of complex permitivity of varnish component.

Software for LBIC method
Kučera, Filip ; Veselý, Aleš (referee) ; Vaněk, Jiří (advisor)
This thesis is focused on one of the diagnostic methods of fotovoltaic cells the LBIC (Light Beam Induced Current) method and the experimental measurement set-up for this method, which is operated by the Department of Electrical and Electronic Technology in Brno. The principle of photovoltaic cells function, the possibly used material and the problems usually encountred during production are described in this work,. There is also a review of methods that can be used to detect defects in photovoltaic cells. The main part is devoted to the proposal of a new experimental set-up for the measuring LBIC method and software development for this set-up. There is a proposal of a new method of measurement, which is also implemented using the development environment Borland C + +. Newly developed software for this method allows simpler operation and more efficient measurements.

Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.

STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.

The role of the nurse is to aid in the improvement of the quality of life for children who have been through meningitis
ŠPAČKOVÁ, Jana
The role of the nurse is to aid in the improvement of the quality of life for children who have been through meningitis. In recent years, the issue of quality of life has become of interest in many disciplines and the general public. In health care, the quality of life is known as HRQoL - Health Related Quality of Life - loosely translated as ?the quality of life related to health?. The term of ?diagnostic quality of life in children and adolescents? is primarily used for the area of professional health care and it is an important indicator of disease severity and the outcomes of provided care. The objective of this thesis was to assess the quality of life of children who have been through meningitis, to identify the main areas in which the quality of life of these children is reduced, and to suggest nursing interventions aimed at improvements. The data collection took place in the period November 2009 - June 2010 at the Clinic for Childhood Infectious Diseases, University Hospital Brno. A qualitative research used the technique of studying written documents and, subsequently, non-standardized in-depth interviews with respondents were carried out. Prior the beginning of the qualitative survey, five research questions were established. Question 1: What kind of care and what interventions do children expect from nurses? Question 2: What kind of care and what interventions do parents expect from nurses? Question 3: How to evaluate subjectively the quality of children?s? life after meningitis as compared to the state prior the disease? Question 4: How do parents see the quality of life of their child after meningitis as compared to the state prior the disease? Question 5: In which areas is the quality of children?s life reduced most? Question 6: What nursing interventions can help nurses to improve the children?s lives? All of the questions were answered using a quantitative research method involving a standardized questionnaire named ?HEALTH AND SATISFACTION QUESTIONNAIRE?. This questionnaire is used in the project ?QOLOP? ? Quality of Life Longitudinal Study of Paediatric Oncology Patients. Hypothesis H 1 was defined prior the start of the quantitative research: The quality of life of children who have been through meningitis is lower than in healthy children. This hypothesis was not confirmed. It is clear, from what has been mentioned above, that the objective of this thesis has been met. This project will be useful in practice. The generated ?Algorithm of Initial Care for a Child with Meningitis? and ?Subsequent Care of a Child with Meningitis? should help nurses orientate and identify the basic needs of children with this disease. Moreover, this thesis can be used as a theoretical basis for the education of nursing students.

Past and present of education of paediatric nurses and their attitudes towards their own profession
ZMEŠKALOVÁ, Stanislava
This thesis deals with the history and present state of the education of paediatric nurses and their attitudes towards their own profession. The first objective was to find out information regarding the education in the nursing profession in Bohemia, with a focus on child care, and to create an overview of the education in the profession Paediatric Nurse. The second objective was to find out about the attitudes of paediatric nurses towards their profession. Interviewed were sisters who chose the profession after finishing elementary school and underwent qualifying studies as well as nurses who chose the profession after graduating from a secondary school or university education and achieved their education through specialization studies. The last objective was to compare these two groups and to assess whether there are any differences between them. The theoretical background of the thesis defined basic concepts such as the definition of education, education in nursing, a profession, and attitude towards a profession. Documents related to education since the foundation of nursing education to the present were also used and studied. The chapters on the status of nursing staff and its employment chances focus on the development of the relationship to the profession and shaping attitudes towards it. In the research part of the thesis, the collected information related to education and derived from archival documents, literature, laws and regulations is presented. The results can be used as a basis for creating educational material focused on the history of the field and intended for the education of paediatric nurses to strengthen their identification with the profession. The thesis also presents interviews with in-service paediatric nurses where they express their views on the work in the field and their attitudes towards their profession. The results of the interviews are documented and organized so that it is possible to assess whether there are any differences between these groups. The anticipated differences can be used for further investigation focused on attitudes to the profession. Verified knowledge could then be used for training paediatric nurses aimed at creating desired attitudes towards the profession.

Bob Krčil
Douša, Jan ; MOUCHA, Josef (advisor) ; Buddeus, Hana (referee)
The life and work of Bob Krčil have so far been known from fragments and unsubstantiated legends. The aim of this essayistic piece is to lay out the deeper motives of his personal trajectory, photographic oeuvre, and activities for the Czech exile community. Krčil’s photographic body of work is inseparably connected with his eventful life. The writing of the thesis was preceded by tracking down and putting together Krčil’s fragmented estate, sorting out his correspondence and writings, and interviewing people who knew him personally. By drawing on these materials, the thesis aims to provide insight into the life and motivations of this important figure of Czech exile culture.

San Minn (or) An Artist who prefer creating and paintings than his life
Zeya, Pyin Nyar ; JANEČEK, Vít (advisor) ; VOJTĚCHOVSKÝ, Miloš (referee)
No one can control a painter artist’s freely thoughts and ideas and although his paintings were under the high pressure and banned by force, the artistic value of his materials never go down. So that I am writing this paper. He, San Minn has broken out the mainstream of Burmese painting field, he never made business paintings as well. He keeps his belief on the art of paints and he is always finding for the new way to make his paintings. His materials are very different from other Burmese painter artists’ materials. His style is unique in Burmese paintings. So I can get a chance to study of his style, ideas, ways of thinking and his determination on the art works. My paper can show a painter artist’s life who grew up under the military rule for 50 years and the situation and history of Burmese painting field. Then not only people who are studying the painting subject, but also other people can know about the subject of Burmese painting and field of artists. I dare say that my paper must be colorful and fruitful. As a painter artist, it seems that he wants his audience to feel his materials but he rare to show his real life behind the pictures. For me, I can get a chance to know about his real life for my thesis paper. xxxxxxxxxx Thesis Statement My thesis can be useful for everybody who is interested in Burmese contemporary art field. This is the biggest chance to read about one of the most famous, important and significant artists and art movements of Burma. His paintings are reflecting his journey through over 40 years of censorship, but he was not afraid to tackle political and social issues. Many of San Minn's art works are based on autobiographical, making sharp social commentary on the popular culture, social values and scenario circumstances where he has lived in. xxxxxxxxxx

Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.