|
Economic Rights to Results of Scientific Research and Making the Results Available to the Public
Šavelka, Jaromír
The contribution provides a general overview of economic rights that arise in connection to the results of scientific research with particular emphasis given to the possibilities of making the results accessible to the public. The introductory part consists of a brief survey of the economic rights that are applicable to the results of scientific research and deliberates who are the persons entitled to those rights given the different situations. Consequently, barriers that may prevent one from making the results available to the public are elaborated on. The main part deals with recommendations on the subject of avoiding these barriers in order to be able to make the results available to the public in absence of third parties' rights violation.
Fulltext: nusl-126839_2 -  PDF
Slides: nusl-126839_1 - PDF; nusl-126839_3 - PDF
Video: nusl-126839_4 -  MP4
|
|
Empirical analysis of Okun’s law in Iceland
Zajíček, Zdeněk ; Slaný, Martin (advisor) ; Chytilová, Helena (referee)
This thesis deals with empirical analysis of Okuns law in Iceland. Okuns hypothesis of negative relationship between real GDP and the rate of unemployment is being tested on two models, difference and gap, using OLS estimation. Also there are two filtration methods used (Hodrick-Prescott and Baxter-King) for gap model estimation. The results of all models showed weak relationship of variables, but proved the hypothesis. In the following part, the same procedure is being used on Finlands data, to get comparison of coefficients. Results for Finland showed weaker bond of variables than in Iceland, but the Okuns hypothesis still holds. Last part is focused on finding the sensitivity of rate of unemployment to changes in added value of each economical sector in Iceland using the production approach model. This model gave inconclusive results due to insufficient data available.
|
|
External Sources of Finance for Business Projects in the Czech Republic
Kubíčková, Kateřina ; Filipová, Vladimíra (advisor) ; Drozen, František (referee)
This bachelor thesis is focused on external sources of finance for business projects in the Czech Republic. The theoretical framework summarizes the expertise and definitions relating to business, entrepreneurs personality, to legal forms of business and traditional external sources of finance. As the lack of resources or difficult access to traditional sources of capital can sometimes be an obstacle in the realization of a welcome and viable business plan, the second half of the thesis is devoted to alternative options of financing business projects with an emphasis on EU subsidies drawing. Other analysed external sources of finance are the investments of private investors called Business Angels, venture and private equity capital, crowdfunding and at the end preferential credits from banking institutions offered to start-ups or new business projects. The main target of this thesis is to provide an overview of the available external projects funding, to find out how they are going on in the Czech Republic and at the conclusion to assess, what kinds of projects are suitable for every single kind of funding. This thesis could help to entrepreneurs, who do not have enough funds for their idea, to be knowledgeable in current options of external financial sources.
|
|
Development of POS system application with support of EET for retail trade
Nguyen Manh, Tho ; Pavlíčková, Jarmila (advisor) ; Bruckner, Tomáš (referee)
The goal of this thesis is to design and develop an application software for the POS system. The main criterion of the developed system is to support online registration of sales, which meets the requirements stated by the Act no. 112/2016 Coll., on Registration of Sales. In this thesis the POS system is designated to support processes of retail trade. The theoretical part focuses on the description of the POS system and its components. To solve the issue of online registration of sales, an analysis of the legislation and the market with the POS systems was made. The thesis also presents an analysis of the processes and requirements, a solution design and the implementation of applications based on Java. To test the functionality of the developed application a test case was used. The final chapter summarizes the content of the thesis and outlines possible future developments. The output of this paper is a functional POS application, which will be available for download under open-source license. This paper could also serve as a business guide to understand the topic of POS systems and online registration of sales.
|
|
Implementation methodology of open source ERP in SME
Polák, Tomáš ; Gála, Libor (advisor) ; Lieb, Dušan (referee)
This paper deals with the implementation of open source ERP systems in the area of small and medium-sized enterprises. The main objective of this work is to define an open source ERP implementation methodology, suitable for small and medium enterprises. This objec-tive is fulfilled partially by defining of manifesto, as way of thinking about this area and analysis of current state of available implementation methodologies. Newly described met-hodology is then verified by a case study. The main contribution of this work is the defini-tion of implementation methodology for open source ERP systems in area of SME focusing on frequently occurring insufficiencies and leading to successful deployment of company IS.
|
|
Emergency preparedness and protection of the inhabitans in the national company Budějovický Budvar in the release of hazardous substances
JIRKA, Martin
The thesis describes the issue of emergency preparedness and protection of the inhabitants in the National Corporation Budweiser Budvar during the release of hazardous substances. The thesis is focused on important aspects that determine the drafting of emergency documentation. One of aspects is the amount of hazardous chemical - ammonia. The total ammonia content in the object is 22 tons. This amount is according to the Act No. 59/2006 Coll., concerning prevention of major accidents as a sub-limit amount and not as an object into group A or B. On these not-classified resources are not subject to some duties under this Act, especially the obligation to prepare an emergency documentation (except where the regional authority include in the emergency plan then must provide and update the required documents). This paper doesn´t discuss by the massive leakage of 22 tons of ammonia. On the basis of analyzes were identified two sources of the risk. The first is a reservoir about the content of 10 tons which is located on the roof of the engine room. Maximum real filling is around 6 tons. The second source of risk is an expansion tank about the content of 14 tons, which is located in the building with cylinderconicals tanks (CKT). Considered fulfillment of the expansion vessel is about 7 tons. Although in this case is not about buildings and facility in which is treated with such a amount of dangerous chemical substances, which would belonged to the relevant group, I will perform available analysis according to a regulations issued or supportively used to analysis and risk assessment in according to the Act No. 59/2006 Coll., concerning prevention of major accidents. Harmful effects of ammonia are another important aspect. According to the Notice of the Ministry of Interior No. 103/2006 Coll., concerning establish principles defining the emergency planning zone and the extent and method of preparation of an external emergency plan, ammonia is taken as moderately toxic substance that irritates the eyes, mucous membranes, and in high concentrations can cause death. The great advantage from the point of view of the protection inhabitants are the warning properties. Characteristic pungency is already known in very weak concentrations. Also disposal of hazardous concentrations isn't technologically challenging, due to its solubility in the water. Another dangerous effect, except the toxicity is its explosiveness (explosive limit from 15 to 28 %) and flammability. Fortunately controlled condensing pressure prevents ignition and explosion of ammonia. Risk of the explosion and ignition of ammonia isn´t analyzed in this thesis, because the range of effects caused by leakage of several tons, is from a toxicological point of view more threatening. Impacts of hazardous concentrations aren´t threat only for people but also for animals and the environment. The thesis focuses on the analysis and evaluation of risks. The results of this research are an important element of the draft of emergency documentation. During the processing is calculated with methods IAEA-TECDOC-727, Dow's Chemical Exposure Index, Estimation of toxicity and software modeling program ALOHA. Further research is being done by brainstorming and semi-standardized interviews with employees of the company. In conclusion of the thesis is appropriate the drafting of emergency cards and emergency documentation (although not in range under the Act of concerning prevention of major accidents), according to which the reaction proceeded for any leakage of dangerous chemicals (ammonia) into the environment and the protection of workers which occur at the public premises or in the premises of the zone of impact of ammonia spilled outside the area Budweiser Budvar, NC. The use of the draft of emergency documentation is also conditioned by the location of the object in relatively densely populated areas of the county town of České Budějovice.
|
|
Řízení IS/ICT se zaměřením na sourcing služeb informačního systému
Šebesta, Michal ; Voříšek, Jiří (advisor) ; Havlíček, Zdeněk (referee) ; Příklenk, Oldřich (referee) ; Král, Jaroslav (referee)
Research on outsourcing has been around for several decades, while recent evolution in the information systems discipline towards ICT service commoditization significantly changes the context of decision-making. Services that are available on-demand via the Internet allow organizations implementing functions they demand in a fraction of time. This trend represents a chance for organizations seeking to use advanced ICT services without a need of major investments. Problem is the current lack of guidelines and tools for managing ICT services and their outsourcing. Given the trends on the ICT service market, it is expected that much of the IT management in the future will encompass the ICT services and utilize service-level structures. Methods currently available are either too broad or encompass only small part of the whole problem. Ad-hoc or unsound decisions in this area might cause major complications in terms of quality, usability, integration, and consequently influence total cost of organizational IT. Organizations need to either revise existing models or propose and implement completely new models to manage their IS/ICT. This thesis deals with the management of IS/ICT with focus on the ICT services outsourcing. It discusses available sourcing models in the literature and links them to the various interconnected areas. Based on these areas, it presents an integrated view on IT outsourcing strategies. Most importantly the thesis proposes an original concept for decision-making about outsourcing of ICT services named the SOURCER framework. This approach utilizes the presented outsourcing strategies, and introduces a complex methodology and decision-making criteria that will assist organizations with selection of ICT services in order to maintain and manage a most suitable ICT service portfolio. The decision-making is based on four essential viewpoints: function, costs, time, and quality. These viewpoints are discussed, individually analyzed, and serve as a basis for further research. The whole framework is developed and validated according to Design Science Research Methodology (DSRM). Individual components are evaluated using a survey among a group of selected IT managers. Proof of concept is then established by a case study on framework use in a real organization. This case study covers strategy specification, business--IT alignment, specifying service architecture and its interconnections, outsourcing, and management of the ICT service portfolio.
|
|
Clustering and regression analysis of micro panel data
Sobíšek, Lukáš ; Pecáková, Iva (advisor) ; Komárek, Arnošt (referee) ; Brabec, Marek (referee)
The main purpose of panel studies is to analyze changes in values of studied variables over time. In micro panel research, a large number of elements are periodically observed within the relatively short time period of just a few years. Moreover, the number of repeated measurements is small. This dissertation deals with contemporary approaches to the regression and the clustering analysis of micro panel data. One of the approaches to the micro panel analysis is to use multivariate statistical models originally designed for crosssectional data and modify them in order to take into account the within-subject correlation. The thesis summarizes available tools for the regression analysis of micro panel data. The known and currently used linear mixed effects models for a normally distributed dependent variable are recapitulated. Besides that, new approaches for analysis of a response variable with other than normal distribution are presented. These approaches include the generalized marginal linear model, the generalized linear mixed effects model and the Bayesian modelling approach. In addition to describing the aforementioned models, the paper also includes a brief overview of their implementation in the R software. The difficulty with the regression models adjusted for micro panel data is the ambiguity of their parameters estimation. This thesis proposes a way to improve the estimations through the cluster analysis. For this reason, the thesis also contains a description of methods of the cluster analysis of micro panel data. Because supply of the methods is limited, the main goal of this paper is to devise its own two-step approach for clustering micro panel data. In the first step, the panel data are transformed into a static form using a set of proposed characteristics of dynamics. These characteristics represent different features of time course of the observed variables. In the second step, the elements are clustered by conventional spatial clustering techniques (agglomerative clustering and the C-means partitioning). The clustering is based on a dissimilarity matrix of the values of clustering variables calculated in the first step. Another goal of this paper is to find out whether the suggested procedure leads to an improvement in quality of the regression models for this type of data. By means of a simulation study, the procedure drafted herein is compared to the procedure applied in the kml package of the R software, as well as to the clustering characteristics proposed by Urso (2004). The simulation study demonstrated better results of the proposed combination of clustering variables as compared to the other combinations currently used. A corresponding script written in the R-language represents another benefit of this paper. It is available on the attached CD and it can be used for analyses of readers own micro panel data.
|
|
Data Mining for Effective Customer Communication
Madhi, Simona ; Šperková, Lucie (advisor) ; Novotný, Ota (referee)
The aim of this paper is to describe and illustrate benefits of using Data Mining for effective customer communication. The objective is to perform a Data Mining analysis in order to achieve results with potentially beneficial influence on the company s relationship with its customers, while using the KNIME Analytics Platform tool. The paper introduces the theoretical aspect of Customer Relationship Management, Data Mining and the opportunities of using Data Mining to improve CRM; followed by a market analysis of available Data Mining tools and the introduction of the KNIME Analysis Platform. Furthermore, the knowledge thus reached is used for the performance of real data analysis with the aim of reaching customer knowledge that would be appropriate to use within CRM strategy and finally to positively influence the value of customer relationships.
|
|
Possibilities of Big Data use for Competitive Intelligence
Verníček, Marek ; Molnár, Zdeněk (advisor) ; Šperková, Lucie (referee)
The main purpose of this thesis is to investigate the use of Big Data for the methods and procedures of Competitive Intelligence. Among the goals of the work is a toolkit for small and large businesses which is supposed to support their work with the whole process of Big Data work. Another goal is to design an effective solution of processing Big Data to gain a competitive advantage in business. The theoretical part of the work processes available scientific literature in the Czech Republic and abroad as well as describes the current state of Competitive Intelligence, and Big Data as one of its possible sources. Subsequently, the work deals with the characteristics of Big Data, the differences from working with common data, the need for a thorough preparation and Big Data applicability for the methods of Competitive Intelligence. The practical part is focused on analysis of Big Data tools available in the market with regard to the whole process from data collection to the analysis report preparation and integration of the entire solution into an automated state. The outcome of this part is the Big Data software toolkit for small and large businesses based on their budget. The final part of the work is devoted to the classification of the most promising business areas, which can benefit from the use of Big Data the most in order to gain competitive advantages and proposes the most effective solution of working with Big Data. Among other benefits of this work are expansion of the range of resources for Competitive Intelligence and in-depth analysis of possibilities of Big Data usage, designed to help professionals make use of this hitherto untapped potential to improve market position, gain new customers and strengthen the existing user base.
|
guest ::
