|
Methodology of Selection of Means for Mechanical Cleaning of Dust Particles from Paper Surface
Benešová, M. ; Mašková, Ludmila
The aim of this work was to identify methods of mechanical cleaning of dust particles from the paper surface, which are suitable for use in the restoration practice. For this purpose 15 methods of mechanical cleaning were tested. The basic requirement was the applicability of the methodology for the most restorers. Therefore the methodology included only approaches which do not require any special equipment. The results showed that the type of paper has no effect to cleaning results and the main criterion for selection of means of treatment is the extent of soiling.
Fulltext: content.csg -  PDF
Plný tet: Metodika-mechanické čištění - PDF
|
|
Segmentation of the organic food market
Doležalová, Barbora ; Koudelka, Jan (advisor) ; Ježková, Renata (referee)
The goal of this masters thesis is focused on segmentation of the organic food market in the Czech Republic based on analysis of similarities or differences among consumers in Czech organic food market and also find out who is a typical organic food consumer. The thesis is divided into three parts, the theoretical, the methodological and the practical part. Process of the market segmentation, methods and approaches of the segmentation, the basic concepts and legislation on the matter are described in the theoretical part. Furthermore, mapping the situation of the contemporary state of the Czech organic food market. Marketing research is introduced in methodological part of the thesis. The practical part includes market segmentation by using secondary data MML - TGI (with Data Analyzer software) and primary data from quantitative research (with SPSS software). Variables were reduced to the four factors by using factor analysis. Then consumers were put into five clusters based on cluster analysis. Segments were characterized in detail using a general analysis, contingency tables, MCART analysis and multivariate statistical methods. Finally, there were elaborated appropriate marketing recommendations for the individual segments to effective marketing communication with them.
|
|
Implementation of Lean Six Sigma in Catering
Marek, Petr ; Martínez, Felipe (advisor) ; Mejdrech, Vlastimil (referee)
The aim of the thesis is to suggest recommendation to optimize and increase efficiency in a process of catering ordering in a company Express Deli by using methods of lean six sigma. The work is built as real project od lean six sigma using some methods of the methodology lean six sigma. In the theoretical part of the thesis, methods of lean six sigma used in the practical part, are described. These methods are mainly methods of process mapping. Each chapter is a step of DMAIC methodology. Core part of the thesis is process mapping at a customer side, so in the other part there are all recommendations directly focused on customers requirements. The results of the work are suggested proposals for process improvement. Some of them were implemented during the project.
|
|
The creation of videotutorials for the University of Economics, Prague
Zeman, Ondřej ; Šedivá, Zuzana (advisor) ; Kupec, Michael (referee)
The purpose of this bachelor thesis is to acquaint readers with new possibilities of teaching by using information technology and its application, when making learning material. The main outputs of this thesis are video tutorials, which serve as an education support for the course 4IT110 Use MS Excel in business practice taught in the University of Economics, Prague. However, it may be useful to other students of different courses. The process of making tutorials is described from the very beginning by specifying methodology, creating model exercises, subsequent testing of tutorials by students and optimisation of videos according to their suggestions and comments.
|
|
Implementation methodology of open source ERP in SME
Polák, Tomáš ; Gála, Libor (advisor) ; Lieb, Dušan (referee)
This paper deals with the implementation of open source ERP systems in the area of small and medium-sized enterprises. The main objective of this work is to define an open source ERP implementation methodology, suitable for small and medium enterprises. This objec-tive is fulfilled partially by defining of manifesto, as way of thinking about this area and analysis of current state of available implementation methodologies. Newly described met-hodology is then verified by a case study. The main contribution of this work is the defini-tion of implementation methodology for open source ERP systems in area of SME focusing on frequently occurring insufficiencies and leading to successful deployment of company IS.
|
|
Design of methodology of administration and management of issues and its application in chosen organisation
Holub, Adam ; Stanovská, Iva (advisor) ; Novák, Tomáš (referee)
This thesis is focused on design methodology of administration and management of issues, using issue-tracking system. The objective is to create such methodology and deploy it to specific organization. During methodology creation, there were used best practices, acquired from source thesis and authors experiences. In theoretical part of thesis are described approaches, witch is this thesis based on. Then thesis describes what issue-tracking system is and lists mostly used issue-tracking systems. In practical part, the methodology itself is created. At first, target group is described. Then, types of issuse and roles used in issue-tracking system are described. Then is described, how to create lifecycle of issue and how to handle with its attributes. Last part is focused on data reporting from issue-tracking system. Last chapter of practical part describes how to implement methodology to issue-tracking system JIRA.
|
|
SCRUM methodology and its uses in the innovation process of the company
Krbušek, Adam ; Gála, Libor (advisor) ; Bígl, Martin (referee)
Diploma thesis deals with SCRUM methodology and its uses in innovation management. The main objective of the thesis is creation of a specific framework which will enable to use SCRUM methodology in the innovation process. The thesis is divided into three parts. The first part presents theoretical framework important for the main research. This part contains literature review and research dedicated to the SCRUM methodology and innovation process. The second part of the thesis deals with mapping of the SCRUM methodology to Hladik's innovation process. This part also contains own design of the innovation management process. The third part of the thesis is dedicated to the case study. The case study uses described innovation management process for verification of the hypothesis saying that is possible to use SCRUM methodology in the innovation process. The author's contribution lies in creation of a framework which provides agile alternative to the classical innovation management models.
|
|
Design of a methodology for BI solutions in QlikView environment
Judová, Eva ; Pour, Jan (advisor) ; Kunst, Jan (referee)
This master thesis is devoted to a design for methodology of BI projects in QlikView. The main aim is to propose a recommended procedure solutions reflecting the strengths and weaknesses in the development of QlikView applications. Accompanying chapter to the discussed issue is a chapter Business Intelligence which explains the principles, characteristics and reasons for implementation in companies. Part of defining the differences between traditional and self-service solutions serves as a theoretical basis for understanding the increasing attractiveness of self-service solutions and environment of the proposed methodology. The next chapter presents the company Qlik as a market leader in BI and the owner of QlikView. The reasons for its establishment, subsequent development and actual vision are listed to create a comprehensive view of the environment where the described product was created. Along with the chapter focusing on characteristics and main advantages of QlikView a knowledge base is established for the implementation of proposed methodology. Crucial chapter of this thesis is based on the author's experience gained while implementing QlikView projects. The proposed methodology is based on the description of each phase, its activities, inputs and outputs and its concrete application in a demo environment for the area of receivables in manufacturing company. The key contribution of the author is pointing out potential problems during development or warning about critical parts or providing appropriate recommendations and benefits of the proposed procedures. The designed methodology can serve as a useful guide for self-service projects implemented the QlikView environment.
|
|
Valuation of the MSV Metal Studénka, a. s.
Honc, Adam ; Strouhal, Jiří (advisor) ; Smrčka, Luboš (referee)
The aim of this thesis is to determine the market value of joint-stock company MSV Metal Studénka for 31. 12. 2015. The thesis is divided into theoretical-methodological and practical part. The former contains the definitions of terms, techniques and methods which relate to not only the problems of company appreciation but also insolvency law focusing on corporate restructuring. In the practical part, the theoretical groundwork is applied. After the initial introduction of the company including a brief description of the course of insolvency proceeding, a strategic and financial analysis is conducted. After the evaluation of the company's financial health and future perspective, a division of assets into operationally necessary and unnecessary, analysis and value generator prognosis, financial plan formulation and the evaluation itself follow. For the final company appreciation, the discounted cash flow method in the variant of free cash flow to the firm (FCFF) is used.
|
|
Řízení IS/ICT se zaměřením na sourcing služeb informačního systému
Šebesta, Michal ; Voříšek, Jiří (advisor) ; Havlíček, Zdeněk (referee) ; Příklenk, Oldřich (referee) ; Král, Jaroslav (referee)
Research on outsourcing has been around for several decades, while recent evolution in the information systems discipline towards ICT service commoditization significantly changes the context of decision-making. Services that are available on-demand via the Internet allow organizations implementing functions they demand in a fraction of time. This trend represents a chance for organizations seeking to use advanced ICT services without a need of major investments. Problem is the current lack of guidelines and tools for managing ICT services and their outsourcing. Given the trends on the ICT service market, it is expected that much of the IT management in the future will encompass the ICT services and utilize service-level structures. Methods currently available are either too broad or encompass only small part of the whole problem. Ad-hoc or unsound decisions in this area might cause major complications in terms of quality, usability, integration, and consequently influence total cost of organizational IT. Organizations need to either revise existing models or propose and implement completely new models to manage their IS/ICT. This thesis deals with the management of IS/ICT with focus on the ICT services outsourcing. It discusses available sourcing models in the literature and links them to the various interconnected areas. Based on these areas, it presents an integrated view on IT outsourcing strategies. Most importantly the thesis proposes an original concept for decision-making about outsourcing of ICT services named the SOURCER framework. This approach utilizes the presented outsourcing strategies, and introduces a complex methodology and decision-making criteria that will assist organizations with selection of ICT services in order to maintain and manage a most suitable ICT service portfolio. The decision-making is based on four essential viewpoints: function, costs, time, and quality. These viewpoints are discussed, individually analyzed, and serve as a basis for further research. The whole framework is developed and validated according to Design Science Research Methodology (DSRM). Individual components are evaluated using a survey among a group of selected IT managers. Proof of concept is then established by a case study on framework use in a real organization. This case study covers strategy specification, business--IT alignment, specifying service architecture and its interconnections, outsourcing, and management of the ICT service portfolio.
|
guest ::
