|
A study of bi-material notches under a combined loading mode
Kopp, Dalibor ; Klusák, Jan
In the range of linear elastic fracture mechanics, the conditions for critical loading assessment of structures made of two dissimilar materials are usually based on the assumptions of a prevailing normal mode of loading. The same assumption is usually applied to the stability criterion of bi-material notches. However, in engineering practice there are cases of loading and failure close to the shear mode. The aim of the work is the study of the stress distribution in the vicinity of a bi-material notch subjected to a combination of normal and shear modes of loading. Further, the assessment of crack initiation from the stress concentrator is shown.
|
| |
|
Small mammals in diet of barn owl in the Eastern Meditarranean
Šindelář, Jiří ; Horáček, Ivan (advisor) ; Anděra, Miloš (referee)
The extensive material of skeletal remains of mammals from a diet of barn owl in the eastern Mediterranean has been processed and evaluated with different techniques of chorological and morphometric analysis. At least 8400 individuals of 45 species of insectivores, rodents and bats were found in our total collection of samples, which represents a significant portion of fauna of the region. We have evaluated a chorological composition of the taphocoenoses and the interregional differences, manifested primarily by differences in the representation of satellite and accessory elements. We found a highly significant impoverishment of the isolated island taphocenoses (Cyprus, Karpathos, partly on Crete), where Cricetidae, Arvicolidae, C. leucodon etc. are missing. On the other hand the essential part of the dominance structure takes up the Rattus rattus, which acts here as an invasive species, significantly more successful than in the ragged continental contexts. The species diversity of the examined samples is positively correlated with the geographic latitude (taphocenoses of the northern regions are significantly richer) and negatively with the island effect and the degree of aridization. The morphometric analysis of the three most abundant species of Soricidae within the studied region showed...
|
|
Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.
|
|
INFLUENCE OF LASER CUTTING AND PUNCHING ON MAGNETIC PROPERTIES\nOF ELECTRICAL STEEL M470-50A
Bulín, Tomáš ; Švábenská, Eva ; Hapla, Miroslav ; Ondrůšek, Č. ; Schneeweiss, Oldřich
Electrical steel M470-50A belongs to the most often used materials in electrical machines. Due to this fact, it is desirable to know the magnetic parameters after processing raw sheets into the required shape. Basic parameters of mechanical, electrical, and magnetic properties of the sheets are usually obtained from the producer but the magnetic properties are changing in dependence on additional machining processes. The aim of this study is to describe changes in parameters of magnetic behavior after punching, laser and spark cutting of the original sheets. The basic information of structure was obtained by optical and scanning electron microscopy. The magnetic parameters were acquired from the measuring of magnetic hysteresis loops in dependence on saturation fields and frequencies. The results are discussed from the point of view of applied\ncutting technology with the aim to obtain the best magnetic parameters and consequently a higher efficiency of the final product. Results can be used as input parameters in simulation of the electrical machine.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
| |
|
San Minn (or) An Artist who prefer creating and paintings than his life
Zeya, Pyin Nyar ; JANEČEK, Vít (advisor) ; VOJTĚCHOVSKÝ, Miloš (referee)
No one can control a painter artist’s freely thoughts and ideas and although his paintings were under the high pressure and banned by force, the artistic value of his materials never go down. So that I am writing this paper.
He, San Minn has broken out the mainstream of Burmese painting field, he never made business paintings as well. He keeps his belief on the art of paints and he is always finding for the new way to make his paintings. His materials are very different from other Burmese painter artists’ materials. His style is unique in Burmese paintings. So I can get a chance to study of his style, ideas, ways of thinking and his determination on the art works.
My paper can show a painter artist’s life who grew up under the military rule for 50 years and the situation and history of Burmese painting field. Then not only people who are studying the painting subject, but also other people can know about the subject of Burmese painting and field of artists. I dare say that my paper must be colorful and fruitful.
As a painter artist, it seems that he wants his audience to feel his materials but he rare to show his real life behind the pictures. For me, I can get a chance to know about his real life for my thesis paper.
xxxxxxxxxx
Thesis Statement
My thesis can be useful for everybody who is interested in Burmese contemporary art field.
This is the biggest chance to read about one of the most famous, important and significant artists and art movements of Burma. His paintings are reflecting his journey through over 40 years of censorship, but he was not afraid to tackle political and social issues.
Many of San Minn's art works are based on autobiographical, making sharp social commentary on the popular culture, social values and scenario circumstances where he has lived in.
xxxxxxxxxx
|
|
Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_22316111113040 - PDF
|
|
Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.
|
guest ::
