|
Optical methods in non-contact velocity measurement
Šmíd, Petr
The paper presents an overview of some interesting methods using optical and sound waves for non-contact velocity measurements. The paper focuses mainly on optical techniques using different optical principles as interferometry, image analysis and processing, and speckle effect.
|
|
The theory of redistribution and its application
Mihalčinová, Hana ; Dlouhý, Martin (advisor) ; Valenčík, Radim (referee) ; Peško, Štefan (referee)
The theory of redistribution systems is a practical extension of a game theory, which deals with a redistribution within a social system of more than two players with di?erent performances and ability to create coalitions. This thesis is divided into three chapters. The ?rst chapter describes the known knowledge of a game theory. The second chapter deals with the theory of redistribution systems. Using an elementary redistribution system and its generalization group behaviour when dividing a payment, achieved by a collective performance, is described. This part introduces the extension of the redistribution system to a compound redistribution system with a fractal structure. Furthermore the theory of discriminatory equilibrium and the theory of commonly acceptable equilibrium are veri?ed using the elementary redistribution system and utility theory. The third chapter deals with an application to the allocation of funds among faculty departments. A game theory approach was used to reduce the game to a non-cooperative game of two players by using the forming of coalitions. Also the theory of redistribution systems was applied when a reduction was used to create a non-cooperative two-player game. This reduced non-cooperative game between two players was converted to a cooperative play of more than two players by changing the rules of the game and allowing a formation of coalitions. In the practical part both of these approaches are compared with real data and a current state.
|
|
Analysis of the marketing activities in nonprofit organization INEX-SDA
Müllerová, Michaela ; Procházková, Markéta (advisor) ; Polcar, Jakub (referee)
The aim of this thesis is to analyze marketing activities of nonprofit organization INEX-SDA and make recommendations relating to the marketing mix which would increase awareness of this foundation and also increase voluntary help from the public. The thesis is divided into two parts. First part deals with theoretical definition of marketing and its specifics related to the nonprofit sector. The theoretical part is followed by a practical part in which organization INEX-SDA and the individual elements of the marketing mix are specified. In this part there was also done marketing research. With the analysis of marketing activities information is obtained which together with the theoretical knowledge leads to recommendations relating to the marketing activities of this non-profit organization. The thesis ends with an overall summary.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
Parallel single-cell analysis of active caspase-3/7 in apoptotic and non-apoptotic cells
Ledvina, Vojtěch ; Klepárník, Karel
Caspases are proteases that play key role in the process of apoptosis, the programmed\ncell death. Among them, caspase-3 and -7 are main executioner caspases that cleave\nmany vital proteins during apoptosis and after their widespread activation, the process\ncannot be reversed. To analyze caspase-3/7 activation within single cells, a miniaturized\ndevice for parallel analysis of eight samples was developed. The assay is based on the\nmodified luciferin-firefly luciferase bioluminescence (BL) system. Individual\nsuspended cells were collected and transferred into detection microvials using a\nmicromanipulator. The bioluminescence was detected using a photon counting head\nwith cooled photcathode. The LOD suitable for detection of active caspase-3/7 in both\napoptotic and non-apoptotic cells was reached.
|
| |
| |
|
Effect of snowpack on runoff generation during rain on snow event.
Juras, Roman ; Máca, Petr (advisor) ; Ladislav , Ladislav (referee)
During a winter season, when snow covers the watershed, the frequency of rain-on-snow (ROS) events is still raising. ROS can cause severe natural hazards like floods or wet avalanches. Prediction of ROS effects is linked to better understanding of snowpack runoff dynamics and its composition. Deploying rainfall simulation together with hydrological tracers was tested as a convenient tool for this purpose. Overall 18 sprinkling experiments were conducted on snow featuring different initial conditions in mountainous regions over middle and western Europe.
Dye tracer brilliant blue (FCF) was used for flow regime determination, because it enables to visualise preferential paths and layers interface. Snowpack runoff composition was assessed by hydrograph separation method, which provided appropriate results with acceptable uncertainty. It was not possible to use concurrently these two techniques because of technical reasons, however it would extend our gained knowledge. Snowmelt water amount in the snowpack runoff was estimated by energy balance (EB) equation, which is very efficient but quality inputs demanding. This was also the reason, why EB was deployed within only single experiment.
Timing of snowpack runoff onset decrease mainly with the rain intensity. Initial snowpack properties like bulk density or wetness are less important for time of runoff generation compared to the rain intensity. On the other het when same rain intensity was applied, non-ripe snowpack featuring less bulk density created runoff faster than the ripe snowpack featuring higher bulk density. Snowpack runoff magnitude mainly depends on the snowpack initial saturation. Ripe snowpack with higher saturation enabled to generate higher cumulative runoff where contributed by max 50 %. In contrary, rainwater travelled through the non-ripe snowpack relatively fast and contributed runoff by approx. 80 %.
Runoff prediction was tested by deploying Richards equation included in SNOWPACK model. The model was modified using a dual-domain approach to better simulate snowpack runoff under preferential flow conditions. Presented approach demonstrated an improvement in all simulated aspects compared to the more traditional method when only matrix flow is considered.
|
|
Design of Experiment for Non-Stationary Processes of Production
Jadrná, Monika ; Macák, Tomáš (advisor)
The doctoral thesis is concerned with the services sector and the area of mass production. Particularly, the optimization of the product portfolio of the travel agency and the optimization of production rounds of ammunition.
The theoretical part deals with the current overview of discussed topic. Further, the terminology and methods of the decision-making process are defined to support decision making. The theoretical basis of research focused on the choice of appropriate input variables in the area of services, and on the choice of a particular material option in the production area and appropriate equipment for the production. The theoretical part forms the basis for the practical part of the thesis.
For the doctoral thesis was chosen an enterprise operating in the defined sector. Product portfolio for the services sector is optimised using Fuzzy logic and Fuzzy sets so that the enterprise can maintain its competitiveness in todays highly ambitious market. Product portfolio for manufacture is optimised for achieving desired properties of the product.
The main aim of the thesis is to propose a new methodological approach for the management of selected business processes in their nonstationary time course. The aim of the practical implementation is to verify the functionality of the proposed methodological approach, both in the area of services and in the field of mass production.
|
|
Time lapse tomography of fracture progress in silicate-based composite subjected to the loading a combination with acoustic emission scanning
Kumpová, Ivana ; Kytýř, Daniel ; Fíla, Tomáš ; Veselý, V. ; Trčka, T. ; Vopálenský, Michal ; Vavřík, Daniel
The initiation and propagation of a fracture in quasi-brittle materials (such as silicatebased composite) is an increasingly discussed topic for which various methods of research have been developed/applied. As the quasi-brittle silicate-based composite compounds are very non-homogenous, the mechanism of the crack initiation and propagation can be very different even for samples with the\nidentical geometry. One possible approach to study the fracture mechanism in quasi-brittle materials is to use several different experimental techniques in a single experiment and perform detail analysis to identify generally valid fracture process phenomena. In this work, a simultaneous monitoring of fracture\nprocess zone formation and propagation by three different methods is presented and discussed. A three point bending test was performed on a notched silicate composite specimen. During the loading process, a highly accurate force displacement dependence was recorded accompanied with X-ray radiography,\nX-ray computed tomogra-phy and acoustic emission scanning.
|
guest ::
