| |
|
Specifics of first aid education at primary schools
Melicharová, Radka ; Ehler, Edvard (advisor) ; Pavlasová, Lenka (referee)
Title: Specifics of first aid education at primary schools Summary This diploma thesis deals with issues of first aid education at primary schools. Motivation for working on this topic is described in the introductory part. Aims, which were set for this thesis, follow. The theoretical part pays attention firstly to educational documents and programmes which look into teaching and learning first aid at primary schools. It describes theoretical basis for first aid education in detail. This basis includes definition of the term first aid, differences between injuries and illnesses, emergency services, materials used for first aid, types of injuries (illnesses) and first aid related to them, bandage techniques and last but not least prevention. Didactic view of first aid education is a very important chapter of this part. It offers useful advice for creating an effective teaching and learning process both organizationally and methodically. It describes briefly important aspects of teaching and learning process such as aims, motivation, didactic principles, methods and forms of organization. The empirical part follows. Its aim is to give a detailed description and evaluation of a project of first aid education at ZŠ Ledeč nad Sázavou. It describes planning, progress of the spring and summer part and evaluation...
|
|
INFLUENCE OF LASER CUTTING AND PUNCHING ON MAGNETIC PROPERTIES\nOF ELECTRICAL STEEL M470-50A
Bulín, Tomáš ; Švábenská, Eva ; Hapla, Miroslav ; Ondrůšek, Č. ; Schneeweiss, Oldřich
Electrical steel M470-50A belongs to the most often used materials in electrical machines. Due to this fact, it is desirable to know the magnetic parameters after processing raw sheets into the required shape. Basic parameters of mechanical, electrical, and magnetic properties of the sheets are usually obtained from the producer but the magnetic properties are changing in dependence on additional machining processes. The aim of this study is to describe changes in parameters of magnetic behavior after punching, laser and spark cutting of the original sheets. The basic information of structure was obtained by optical and scanning electron microscopy. The magnetic parameters were acquired from the measuring of magnetic hysteresis loops in dependence on saturation fields and frequencies. The results are discussed from the point of view of applied\ncutting technology with the aim to obtain the best magnetic parameters and consequently a higher efficiency of the final product. Results can be used as input parameters in simulation of the electrical machine.
|
| |
|
San Minn (or) An Artist who prefer creating and paintings than his life
Zeya, Pyin Nyar ; JANEČEK, Vít (advisor) ; VOJTĚCHOVSKÝ, Miloš (referee)
No one can control a painter artist’s freely thoughts and ideas and although his paintings were under the high pressure and banned by force, the artistic value of his materials never go down. So that I am writing this paper.
He, San Minn has broken out the mainstream of Burmese painting field, he never made business paintings as well. He keeps his belief on the art of paints and he is always finding for the new way to make his paintings. His materials are very different from other Burmese painter artists’ materials. His style is unique in Burmese paintings. So I can get a chance to study of his style, ideas, ways of thinking and his determination on the art works.
My paper can show a painter artist’s life who grew up under the military rule for 50 years and the situation and history of Burmese painting field. Then not only people who are studying the painting subject, but also other people can know about the subject of Burmese painting and field of artists. I dare say that my paper must be colorful and fruitful.
As a painter artist, it seems that he wants his audience to feel his materials but he rare to show his real life behind the pictures. For me, I can get a chance to know about his real life for my thesis paper.
xxxxxxxxxx
Thesis Statement
My thesis can be useful for everybody who is interested in Burmese contemporary art field.
This is the biggest chance to read about one of the most famous, important and significant artists and art movements of Burma. His paintings are reflecting his journey through over 40 years of censorship, but he was not afraid to tackle political and social issues.
Many of San Minn's art works are based on autobiographical, making sharp social commentary on the popular culture, social values and scenario circumstances where he has lived in.
xxxxxxxxxx
|
|
Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_22316111113040 - PDF
|
|
Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.
|
|
Zalužanský Brook Restoration Project
Lašek, Jakub ; Kalibová, Jana (advisor)
This thesis contains restoration project of chosen section of Zalužansky brook in Ústecký kraj. Project is processed at the level of documentation for territorial management according to decree no. 499/2006, of buildings documentation. Theoretical part captures professional literature research dedicated to restorations, spatial planning and buildings documentation. Analytic segment closely defines and characterise location of interest at first, although major part consists of designed restoration measures following requirements for creating a building documentation by mentioned decree. Benefit from this thesis is it's possible usage as a background material for documentation created by authorised engineer for water management and landscape planning.
|
|
Use of Literary Artwork As a Way to Open the Topic of Unfreedom
Machková, Tereza ; PROVAZNÍK, Jaroslav (advisor) ; ULRYCHOVÁ, Irina (referee)
The Bachelor thesis describes the preparation and realization of a project that happened as a two-day workshop of drama education for pupils of secondary school. This workshop was created on the basis of two books written by Peter Sís Tibet: Through the Red Box and Wall: Growing Up Behind the Iron Curtain, These books introduce topics : occupation and unfree life in a totalitarian regime.
The first part describes the literary artworks and possibilities of their use in proces of dramatic education. The following part is describing a report about the bachelor project that was run two times . In the final chapter you can see a lesson scenario of the two days workshop.
In attachment there are the materials that were used during the workshop, structures of lessons and written reflections of the participants.
|
|
Improving labour productivity: How to determine standard time for performing specific tasks in the selected organization
BARTOŠKOVÁ, Martina
This bachelor thesis focuses on the standard time needed for specific tasks in the selected organization, as well as on the appropriate methods for its determination. The findings serve as a basis for the formulation of measures which should be taken to improve labour productivity. The methods include the standardization of tasks, time study and computer-based data analysis (Microsoft Excel spreadsheets). The theoretical part of the paper discusses the nature of job production, the methods appropriate for the calculation of standard production time and the ways to ensure efficient work and time management in the given factory. Apart from these, a complete description (history, facility layout, pre-production and production stages, machines and materials) of the selected organization is provided to serve as a background for the case study presented in the practical part. This includes the list of production tasks, production time tables and time standards along with materials necessary to facilitate production. The aim of the thesis is to help the organization improve its labour productivity and provide it with the algorithm which can be used to determine production time for similar orders.
|
guest ::
