| |
| |
|
Anti-Plague texts in the late Middle Ages and the Early modern period.
PAMPUSCHOVÁ, Marie
The theme of this work are late medieval and early modern time anti-plague treatises and official regulations against plague. In times when many countries and even continents were affected by plague, many city councils and rulers themself had the treatises printed in order to reduce the risk of transmission of the infection and development of the illness. The treatises adjusted regulations of towns and villages. These official decrees against plague were supplemented with plague treatises that were written for inhabitants of towns affected by black death. Many of them were written in Latin and therefore incomprehensible to uneducated people. It changed when a doctor Jan Černý wrote such a treatise in Czech language. The treatises advised not only how to prevent plague but also how to treat it. I divided my work into two parts. In the first part I describe particular plague epidemics that took place especially in Bohemia and Moravia. I progressed chronologically from antiquity to the 18th century and described whole course of epidemics in various regions. In the second part I focused mainly on different ways how these treatises deal with prevention and treatment of the disease. I made a comparison of various plague treatises from Prague, České Budějovice and Nepomuk. In order to gather data and informations I focused on historical sources and literature that give us informations from people who had first-hand experience of plague. I do the overall comparison and critique of these sources in seperate chapter. I believe this work can work as an educational material for students and teacher
|
|
The stability of biologically active compounds in elderberry (Sambucus nigra L.) inflorescence during processing
SUCHÁ, Renata
This thesis examines the stability of rutin in the inflorescences of the elder during processing. Elder (Sambucus nigra L.) is a medicinal plant that was used for medical purposes as early as in the Middle Ages. Both flowers (Flos Sambuci) and fruit (Fructus Sambuci) of the elder are on the list of official medicinal products of the State Institute for Drug Control. The main active phenolic substance is flavonoid rutin. Flavonoids are phenolic substances of plant origin. Among the best known properties of these substances is their antioxidant activity. They protect the low density blood lipoproteins from the oxidation modifications that cause the development of arteriosclerosis and hypertension. As a medical plant, the elder is used especially for the preparation of a medicinal drink. It is also commonly used as a material for the preparation of syrup. This product serves as a basis for a refreshing and tasty drink and lately is has also started to be sold in shops. For comparison, five single-flower syrups from the elderflower by different producers were bought. A method of preparation of the elderflower syrup was devised, based in one case on frozen elder inflorescences and in the other on dried inflorescences. The plant material came from wildly growing shrubs and it was collected in June 2013. Altogether, 8 syrups were prepared in the laboratory, 4 of them from fresh material and 4 from dried material. Two different methods were used. The first one was based on extraction using sugar solution, the second one on extraction using water solution where sugar was added afterwards. Another added substance was ethanol. The method for measuring the amount of rutin in the samples was a combination of two extraction steps. The first step was the usual exraction using aqueous methanol and the second step was extraction using a solid sorbent (SPE). The analysis of fresh and dried material concluded that dried elderflowers contain many times more rutin than fresh elder. Among the commercially produced syrups, the "Kitl Syrob Bezový" contained most rutin; a little less rutin was found in "Hamé Bylinný sirup Bezový květ". The concentration of rutin in the syrups prepared in the laboratory was much higher than in the commercial products. By using different methods of syrup preparation and their subsequent analysis, it was found that the syrups prepared from the dried inflorescences contained a higher amount of rutin than the syrups produced in the same way, but from frozen material. Addition of a small amount of ethanol had no effect on extraction of rutin from inflorescences. Free quercetin, which indicate a decomposition of rutin, wasn´t found in any of produced syrups. The produced syrups were used for the preparation of a drink and then underwent sensory analysis. The paired two-sided preference test included pairs of drinks consisting of a fresh elder drink and dried elder drink. The results showed that the evaluators preferred syrups from dried elderflowers in two of the cases, while in the other two evaluated pairs, the results were not statistically significant. In all cases, the evaluators most often found small and middle differences. The gained results show that the best method of syrup preparation uses dried plant material and sucrose solution as the extraction agent. The syrup prepared in this way contained most rutin and at the same time showed the smallest losses of this substance, which is beneficial to human health. Furthermore, it also tasted better in comparison with syrup prepared in the same way, but from fresh material.
|
|
Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.
|
|
INFLUENCE OF LASER CUTTING AND PUNCHING ON MAGNETIC PROPERTIES\nOF ELECTRICAL STEEL M470-50A
Bulín, Tomáš ; Švábenská, Eva ; Hapla, Miroslav ; Ondrůšek, Č. ; Schneeweiss, Oldřich
Electrical steel M470-50A belongs to the most often used materials in electrical machines. Due to this fact, it is desirable to know the magnetic parameters after processing raw sheets into the required shape. Basic parameters of mechanical, electrical, and magnetic properties of the sheets are usually obtained from the producer but the magnetic properties are changing in dependence on additional machining processes. The aim of this study is to describe changes in parameters of magnetic behavior after punching, laser and spark cutting of the original sheets. The basic information of structure was obtained by optical and scanning electron microscopy. The magnetic parameters were acquired from the measuring of magnetic hysteresis loops in dependence on saturation fields and frequencies. The results are discussed from the point of view of applied\ncutting technology with the aim to obtain the best magnetic parameters and consequently a higher efficiency of the final product. Results can be used as input parameters in simulation of the electrical machine.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
|
San Minn (or) An Artist who prefer creating and paintings than his life
Zeya, Pyin Nyar ; JANEČEK, Vít (advisor) ; VOJTĚCHOVSKÝ, Miloš (referee)
No one can control a painter artist’s freely thoughts and ideas and although his paintings were under the high pressure and banned by force, the artistic value of his materials never go down. So that I am writing this paper.
He, San Minn has broken out the mainstream of Burmese painting field, he never made business paintings as well. He keeps his belief on the art of paints and he is always finding for the new way to make his paintings. His materials are very different from other Burmese painter artists’ materials. His style is unique in Burmese paintings. So I can get a chance to study of his style, ideas, ways of thinking and his determination on the art works.
My paper can show a painter artist’s life who grew up under the military rule for 50 years and the situation and history of Burmese painting field. Then not only people who are studying the painting subject, but also other people can know about the subject of Burmese painting and field of artists. I dare say that my paper must be colorful and fruitful.
As a painter artist, it seems that he wants his audience to feel his materials but he rare to show his real life behind the pictures. For me, I can get a chance to know about his real life for my thesis paper.
xxxxxxxxxx
Thesis Statement
My thesis can be useful for everybody who is interested in Burmese contemporary art field.
This is the biggest chance to read about one of the most famous, important and significant artists and art movements of Burma. His paintings are reflecting his journey through over 40 years of censorship, but he was not afraid to tackle political and social issues.
Many of San Minn's art works are based on autobiographical, making sharp social commentary on the popular culture, social values and scenario circumstances where he has lived in.
xxxxxxxxxx
|
|
Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_22316111113040 - PDF
|
guest ::
