|
|
Double-stage system of subgrade stabilization
Švarcová, Monika ; Mondschein,, Petr (referee) ; Stehlík, Dušan (advisor)
This diploma thesis is focused on the properties of unsuitable and conditionally unsuitable fine-grained soils after a one-stage or two-stage treatment by using a binder. The theoretical part occupies with problematical properties of the fine grained soils in a subgrade and a possible technology of the change of these properties. The laboratory testing of treated soils is described and a practical technology of the one stage and two-stage stabilization. In the practical part the fine grained soils are treated by one-stage or two-stage stabilization. For the one stage stabilization the cement is used, for the two-stage stabilization the properties of the soil are improved by lime and then the soil is stabilized by cement. The treated soils are laboratory tested, the initial bearing index IBI, California bearing ratio CBR, unconfined compressive strength and frost susceptibility is tested. Based on the results of the laboratory tests the benefit of the two-stage stabilization is measured.
|
|
|
Lean project management
Vrba, Vojtěch ; Štroner, Marek (referee) ; Strejček, Jan (advisor)
The bachelor thesis deals with the topic of lean project management. It is divided into four main parts. The opening one deals with general principles of project management. The second part includes a list of and a brief description of individual losses within the field. The remaining parts join managers’ practical knowledge with information from reference books. The conclusion contains a custom form which is a basis for an analysis of project work in a company that carries it out. An improvement suggestion follows.
|
|
|
Quality management system in a selected company
ZEMANOVÁ, Michala
Diploma thesis deals with quality management system. The aim of the thesis is to analyze the current situation of quality management system in the selected company. Based on the results possible improvements of the system are designed. The selected company is Banes, s.r.o. situated in Soběslav.
|
|
|
Process management in a selected company
BAZGIEROVÁ, Barbora
This thesis is focused on process management as one of the approaches to manage. Process management includes various techniques and activities, as process identification, process mapping, process improvement, that are also mentioned in this work. The practical part or author´s own work is concentrated on the specific corporation. The aim of this thesis was to analyse the processes in the chosen enterprise and to suggest possible improvements in selected processes.
|
|
|
Case Study of Physiotherapy Treatment of a Patient with the Diagnosis of Total Hip Replacement
Papageorgiou, Chrystalla ; Vomáčková, Helena (advisor) ; Kratochvílová, Pavla (referee)
The abstract of my study concerns the treatment of the case of my patient who had an operation of total hip replacement on the right hip joint, caused by post dysplastic arthrosis. My practice was performed at Fakultni Nemocnice Kralovske Vinohrady. Physiotherapy program started on Tuesday 29th of January 2013 and ended on Friday 1st of February 2013. My Bachelor Thesis is divided in two parts: 1) Theoretical part 2) Practical part. In the theoretical part I analyse everything concerning the hip joint, muscles, joints, bones, ligaments, nerves as well as the biomechanical and kinesiological point of view of the hip joint. In the practical part I analyse every procedure I have done with my patient, all the examinations, conclusions, therapies and results. The patient was operated at OTK FNKV hospital at 22nd of January. Goals of the therapy was to decrease pain and edema, increase range of motion of the movement, increase mobility and elasticity of skin and also improve strength of the operated right hip according to the examinations I provided to the practical part. After the five sessions improvements were detected in the final kinesiologic examination. Pain was decreased to 3/10 according to VAS scale, edema was reduced, range of motion (ROM) of the movements and muscle strength were also...
|
|
| |
|
|
Index ekonomické svobody, případ České republiky
Shrbený, Filip ; Stroukal, Dominik (advisor) ; Máslo, Lukáš (referee)
We have identified number of possible advices for the Czech Republic to improve its rating for both Heritage Foundation and Fraser Institute Economic Freedom Index, which often leads to top 10 countries in the world. These advices range from cuts in government spending, betterment in judicial system, to the establishing healthier environment for startups and advices to combat corruption. We further noticed some divergence between above mentioned indexes and managed to evaluate those indexes, which showed the simplicity yet usefulness of Heritage EFI and flexibility and sensitivity of the Fraser EFI. Weak sides of the research were noted and ideas for further research were given.
|
|
|
Possibilities of Using the Six Sigma Method in a Company
Tišerová, Tereza ; Fejfarová, Martina (advisor) ; Jiří, Jiří (referee)
The work is focused on the possibilities of using Six Sigma methods in the company DHL International GmbH. The main aim of the diploma thesis is to evaluate the current progress of Six Sigma method in DHL International GmbH and in case of the detection of deficiencies propose appropriate recommendations. For this purpose the semistructured interview with an employee of the company was conducted and also the analysis of a particular Six Sigma project was accomplished. The theoretical part characterizes a basic concepts related to the Six Sigma method, the major steps, key tools and there are also mentioned other methods that are used in DHL company. In the empirical part is the Six Sigma method applied to a specific project. The recommendations have been proposed based on consultation with DHL employees and with the experts in the field of process improvement. The recommendations are presented in the conclusion of the work.
|
|
|
Possibilities of Using the Six Sigma Method in a Company
Kukla, Jakub ; Fejfarová, Martina (advisor) ; Huml, Jan (referee)
Nowadays, business philosophy or methodology called Six Sigma is considered to be one of the leading tools of quality management. This bachelor thesis is focused on the description and practical demonstration of this methodology. Theoretical part of this thesis describes three different approaches to this methodology which can be understood as a tool of defects measurement, management system or methodology of continual improvement. The essential factor of Six Sigma philosophy is teamwork. This bachelor thesis concisely describes the main roles of the team members and their responsibilities. The key element of this thesis is the description of DMAIC model and its phases, outputs and tools used. Besides this, basic information about DMADV model which is used to design new processes can be found here. The practical part of this thesis describes the implementation of e-shop conversion rate increase project in the company Delmas s.r.o. The data on which the project is based are collected through quantitative and qualitative analysis, interview and company documentation analysis. Using the model DMAIC the data are transformed into the solution which is tested and implemented afterwards. The final part of this thesis summarizes the results of this project, its economical impact and future recommendations.
|
|
|
Company Performance Assessment according to Model Start
Pospíšková, Alžběta ; Dupal, Zdeněk (referee) ; Veselý, Josef (advisor)
This bachelor thesis deals with the performance evaluation of Letovické strojírny, s. r. o. (Ltd) with the use of the Start model. This mechanical engineering company mainly focuses on agriculture machinery. The theoretical part of this thesis contains all necessary information on the performance evaluation and model types typically used for measuring company performance. The analytical part of the thesis first introduces the company and its short history and then answers the questions according to the nine-criterial model referred to as Rada kvality České republiky – model Start. The work is concluded by the model evaluation and improvement proposals.
|
guest ::
