|
|
LABORARTORY BRNO
Zemánková, Petra ; Pospíšil, Zdeněk (referee) ; Boháč, Ivo (advisor)
The aim of the task is a gallery of architecture, design and art. The plot is situated at the corner of the intersection of Koliště Street and Milady Horákové Street in Brno. In my design, I came out from urban connection in the surroundings of the plot. The proposed mass has additional functions as cafe, workshop of art, boutiques, an auditorium, the administration etc. The mass is divided into three parts. This division of mass enables to create inside respirium. These objects are connected with pedestrian bridges. There are designed twenty places for parking in the basement and two places for parking for disabled people on the first floor in my proposal. The designed mass closes the view from třída Kapitána Jaroše.
|
|
|
A car prototype manufacture using modern methods and CAD/CAM
Horák, Aleš ; Zouhar, Jan (referee) ; Sedlák, Josef (advisor)
The project developed under the engineering studies, solves the problem of production of a prototype car using modern technology, reverse engineering and CAD / CAM. Based on the literary study of the issue, was designed process of digitization of the physical model of car, including the treatment and processing of data. Follow-up step was to verify the production of the additive rapid prototyping technology - FDM method. Verification of the results was performed on a vertical milling cantilever FV 25 CNC with control system Heidenhain iTNC 530 using a cutting strategies by PowerMILL CAM software. At the end of the resulting models edit as necessary.
|
|
|
Manufacturing possibilities of the clamping ring part
Dvořák, Jiří ; Peterková, Eva (referee) ; Císařová, Michaela (advisor)
This bachelor work has been elaborated as a part of my bachelor studies of engineering technology and deals with the problem of choosing an optimal method of producing a particular component part named “Clamping ring”. A fundamental emphasis is placed on the economical aspect of the matter while preserving conditions imposed by the client. The component has originally been manufactured by cutting the intermediate out of a sheet metal using a CO2 laser cutting machine, subsequent lathe work, manual boring and creating a thread. This work offers technological alternatives to the manufacturing of the intermediate as well as the following machining. All options are evaluated with regard to the production expenses and lead to a most economically plausible method of manufacturing the entire component part.
|
|
|
Technology solution of "DC-štít" component in the condition a small engineering company
Komínek, Jiří ; Dvořák, Jaromír (referee) ; Kalivoda, Milan (advisor)
This diploma work describes below mentioned issues: a plan of construction technology of component called “DC shield” which consists of a block A and a block B, definition of the tasks for “TPV”. Specification of material, production and checking of a semi-product. Determination of the bases, technologies of working and cutting materials. Determination of the manufacturing machines, working out of processing and composition of a tool set. Definition of the jigs, characteristic of the basic changes. Composition of a program and composition of the subroutine systems. Determination of a checking range, measuring and a process of packaging. Economical evaluation with taking account of environmental aspects of the production.
|
|
|
Order Management in the Company
Matochová, Tamara ; Hyánek, František (referee) ; Šunka, Josef (advisor)
Bachelor paper "Order Management in the Company" deals with the way orders are processed at Modikov. The paper concentrates mainly on the procedure following the receiving of an order from a customer up until the moment the order is dispatched. The paper describes all the operations involved in this process. The goal of the paper is to determine how to improve this process, outline any flaws and suggest concrete ways of improvement.
|
|
|
Sacristian bell operation control by programmable logic controller
Křížek, Ladislav ; Marada, Tomáš (referee) ; Němec, Zdeněk (advisor)
The bell is described, its parts and constructive suppositions for the right function in this work, sacristian bell operation control with hand-working and with the rotating electromotor. Programmable logic controller machine SIEMENS Simatic S7-200 CPU 221 is also described, which is the part of ringing machine in Bukovinka’s church. This ringing machine and especially the mode of both bells have specific defect. According to owner´s wishes and instructions were two variants prepared for this ringing machine to improve the working of couple bells. One of these variants was tested and just tuned at the ringing machine. This one variant follows the owner´s wish, works in Bukovinka´s church till now.
|
|
|
Homeworking in the chosen company
ŠTĚTKAŘOVÁ, Natálie
This bachelor thesis focuses on the homeworking, its advantages and disadvantages, benefits and difficulties for the employer and also for the employees. It contains definitions of the basic terms that are related to homeworking or legal regulation of working from home in the Czech legal system. The main part of the thesis illustrates using of homeworking in UniCredit Bank Czech Republic and Slovakia, Ltd. It describes a method of introduction and utilization of technological resources and application. It also indicates situations in which homeworking is primarily used and a method of protection against hackers and other threats. Results are evaluated and interpreted on the basis of information collected from sent questionnaire survey and face-to-face interview with Ing. Miroslav Zach, the manager of the SME Corporate Client Centre. In conclusion, some suggestions for an improvement are recommended.
|
|
|
Order Management in the Company
Matochová, Tamara ; Hyánek, František (referee) ; Šunka, Josef (advisor)
Bachelor paper "Order Management in the Company" deals with the way orders are processed at Modikov. The paper concentrates mainly on the procedure following the receiving of an order from a customer up until the moment the order is dispatched. The paper describes all the operations involved in this process. The goal of the paper is to determine how to improve this process, outline any flaws and suggest concrete ways of improvement.
|
|
|
LABORARTORY BRNO
Zemánková, Petra ; Pospíšil, Zdeněk (referee) ; Boháč, Ivo (advisor)
The aim of the task is a gallery of architecture, design and art. The plot is situated at the corner of the intersection of Koliště Street and Milady Horákové Street in Brno. In my design, I came out from urban connection in the surroundings of the plot. The proposed mass has additional functions as cafe, workshop of art, boutiques, an auditorium, the administration etc. The mass is divided into three parts. This division of mass enables to create inside respirium. These objects are connected with pedestrian bridges. There are designed twenty places for parking in the basement and two places for parking for disabled people on the first floor in my proposal. The designed mass closes the view from třída Kapitána Jaroše.
|
|
|
Technology solution of "DC-štít" component in the condition a small engineering company
Komínek, Jiří ; Dvořák, Jaromír (referee) ; Kalivoda, Milan (advisor)
This diploma work describes below mentioned issues: a plan of construction technology of component called “DC shield” which consists of a block A and a block B, definition of the tasks for “TPV”. Specification of material, production and checking of a semi-product. Determination of the bases, technologies of working and cutting materials. Determination of the manufacturing machines, working out of processing and composition of a tool set. Definition of the jigs, characteristic of the basic changes. Composition of a program and composition of the subroutine systems. Determination of a checking range, measuring and a process of packaging. Economical evaluation with taking account of environmental aspects of the production.
|
guest ::
