|
|
Rationalization of a manufacturing system at Prodia company
Jakubec, Jan ; Navrátil, Petr (referee) ; Kubík, Roman (advisor)
The work deals with the optimization of the production system in the engineering company Prodia s.r.o. There is a review of technological design in the introduction, the methods of analysis, design methods and capacity calculations are introduced. Subsequently, using these methods, the current state of material flows are analysed, the critical points in the production defined and design of new solution options to eliminate the main weaknesses identified during the analysis. Finally, an evaluation of the best variant and its economic profitability is introduced.
|
|
|
Design of robotic handling systém for CNC production line
Loudát, Pavel ; Jakoubek, Jaroslav (referee) ; Bradáč, František (advisor)
The aim of this thesis was to design the robotic handling system of CNC production line based on requirements of Valeo Compressor Europe in Humpolec. The theoretical part of this thesis includes the profile of the company, analysis of handling system and automated workstations used in production system. The practical part of this thesis includes analysis of the current state and design of handling system for CNC production line. There is recovery of investment analysis for the designed line and summary at the last part of diploma project.
|
|
|
The Project of Production System in Selected Manufacturing Segment
Liška, Radomír ; Tesař, Rostidlav (referee) ; Jurová, Marie (advisor)
This Master’s thesis is focused on the production system design, analysis material flow of the production system in the company ABC Ltd. Part of it is detection of critical places and proposal for their elimination. The theoretical part contains the basic concepts of production. In the analytical part, there is described a current situation in selected manufacturing segment of company. In the final part, the solutions are designed to help improve the business.
|
|
|
The Proposal of Improvement of Production System in GS plus s. r. o.
Fiala, Tomáš ; Šedý, Jaroslav (referee) ; Bartošek, Vladimír (advisor)
This thesis focuses on the analysis material flow of the production system at GS plus Ltd. and suggestions for improvements. The work consists of theoretical, analytical and design parts. The theoretical part contains the basic concepts of production. In the analytical part, there is described a current situation in production areas of the company on the basis of theoretical knowledge. In the final part, the solutions are designed to help improve the business.
|
|
|
Proposal of Warehouse Management Optimalization
Fiala, Tomáš ; Štrobl, Tomáš (referee) ; Hornungová, Jana (advisor)
This thesis focuses on the analysis material flow of the production systemat Thermona Ltd. and suggestions for improvements. The work consists of theoretical, analytical and design parts. Thetheoretical part contains the basic concepts of production. In the analytical part, there is described a current situation in production area softhe company on the basis of theoretical knowledge. In the final part, the solutions are designed to help improve the business.
|
|
| |
|
|
Assessment of workplace production line
Bařinka, Martin ; Knoflíček, Radek (referee) ; Tůma, Zdeněk (advisor)
The aim of this bachelor thesis is to evaluate the current state of knowledge in the design of production lines and assessing the selected production line. The theoretical part of the thesis is focused on the characteristic of production as a key proces in the company and the description of how to construct the design of the production system, the familiarisation with the essence and selected tools of lean manufacturing and ergonomics as a discipline occupied with adaptation of working conditions to a person’s performance capabilities. The practical part of the thesis includes a description of the assembly line for the production of lamellar grates at AHORN CZ, s.r.o, and an engonomic analysis of the workplace of the production line which also includes measures proposed on the basis of the findings followed up by evaluation and recommendations for practise.
|
|
|
Design of a method for measuring the leanness level of production processes
Medonos, Michal ; Blecha, Petr (referee) ; Čambál, Miloš (referee) ; Lenort, Radim (referee) ; Jurová, Marie (advisor)
Focus of this dissertation thesis is to find suitable methodology for measuring the leanness of the production process. The history of approaches to the optimization of production systems is outlined in the literature search. Furthermore, the methodology of lean production is described, the concept of leanness of the production process is defined and also the current approaches and methods of measuring the leanness of the production process are summarized. The next section presents developed Lead Time Leanness Indicator as a proposal for a suitable way to measure the leanness of the production process. Within the primary research, the necessary data are obtained from production companies using a questionnaire survey to test the usability of this indicator in practice. Based on the evaluation of the results of this survey, all established hypotheses are confirmed, and it can be stated that the defined indicator and its methodology is a suitable tool for measuring the leanness of the production process. It is further confirmed that this indicator can be used to set goals for the implementation of the lean production methodology also for a mutual evaluation and comparison of the efficiency of production processes of different companies. Another benefit obtained from the questionnaire survey is the mapping of the current state of the level of leanness of production processes and the intensity of the use of lean production tools in production companies not only in the Czech Republic but also abroad. At the end of the work, a case study is presented, which demonstrates the use of the indicator to determine the current state of leanness of the production process and to define any potential for improvement in a particular manufacturing company.
|
|
|
Paint shop Process Improvement through Predictive Simulation
Machačová, Simona ; Hromková, Ivana (referee) ; Videcká, Zdeňka (advisor)
This thesis focuses on the use of simulation to optimise processes in a paint shop. The aim of the thesis is to analyse the existing production processes and suggest improvements using simulation. In the analytical part of the thesis, the processes in the paint shop are described in detail and Petri nets are used to describe the logic of the processes in the paint shop. In the design part of the thesis, the problem and objectives are formulated, and the design of the simulation model is presented. The design describes the elements and methods used in the Plant Simulation software in which the model is created. Furthermore, different scenarios are simulated to optimize the painting process and the deposition areas. The simulation results are compared with the actual state of the paint shop. Finally, the results are discussed and recommendations are proposed to optimize the paint shop processes using simulation. This work presents new approaches to process optimization in industrial manufacturing.
|
|
|
Lean Management of Production System
Medek, David ; Romanová, Eliška (referee) ; Bartošek, Vladimír (advisor)
This diploma thesis deals with lean management of production system in Inventec (Czech), s.r.o company, Brno branch of which produces desktop PCs and servers of Fujitsu brand. Management of production system is analyzed via tools and methods of lean philosophy and based on the information gained. Proposition (improvement) for a selected part of production system will be made, which will lead to elimination of wasting of resources and time.
|
guest ::
