|
|
Production of part Tube by solid forming
Grufík, Lubomír ; Kopřiva, Miloslav (referee) ; Novotný, Karel (advisor)
Propose of this thesis is designing production technology of reducing part of tube. The production of requested part is designed on the base of calculations and simulation in one operation. This operation contains widening and squeezing. There is designed on the base of calculations a tool fixed in hydraulic press ZHW 40 for the production. To prepare a semi-product is used cutting by slitting saw.
|
|
|
Car Showroom
Smrčka, Václav ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
The aim of the thesis is to design and appreciation steel load-bearing structure of motor show. The object is situated in Brno. The Structure consist of tubes and rolling sections. The breadth of construction is 36,5m, lenght 42m and height in the heihest point is 13,2m. The structrure is consists of three parts. Show room, offices and workshop. The height of show room is 20m, offices 8,5m and workshop 8m. The show room consist of arched truss girder. The distance of each cross links is 6 m. Structural design were perfomered by Scia Engineer 2017 and hand computation.
|
|
|
Hybrid Microphone Preamplifier
Valach, Ondřej ; Hanák, Pavel (referee) ; Koton, Jaroslav (advisor)
The diploma thesis deals with the design of hybrid microphone preamplifier with stepless choice of amplification technology between active part using tube or semiconductor elements. Before the design, the basic physical relations of electroacoustics were described. Problems of connection of audio devices, their voltage and noise conditions. At last technical properties of microphones and tubes were described. In the practical part, the overall structure of the hybrid preamplifier is designed and the goals of the thesis are set. This is followed by a detailed design of the preamplifiers. From input circuits through individual amplifier stages of the semiconductor and tube sections to the output of the device. Much of the circuit was tested by software simulations. Based on the results obtained in the design of the signal part of the preamplifier, the power circuits were designed. Finaly the preamplifier functionality was verified by measurement on the Audio Analyzer.
|
|
|
Assessment of three types of heat exchangers
Hlavinková, Valérie ; Toman, Filip (referee) ; Baláš, Marek (advisor)
The aim of this thesis is to assess selected three types of heat exchangers designed for emergency cooling. The theoretical part of this thesis consists of a research containing an overview of exchangers. It includes a description of the construction of exchangers, characte-ristics in terms of heat transfer and an indication of the areas of its use. The practical part deals with the thermal and hydraulic design of two tube heat exchangers and a plate heat exchanger. Finally, the evaluation of the designed exchangers is performed.
|
|
|
The exhibition hall in Olomouc
Ćmiel, Jiří ; Buchta, Stanislav (referee) ; Šmak, Milan (advisor)
Master's thesis includes designing of exhibition pavilon on a circular platform with a diameter of 35m. The pavilon is designed as a schwedler circular dome. The construction is designed as a ball and is made of tubes. Pavilon includes designing of floors and stairs bearing system that is also made of steel.
|
|
|
Tube Microphone
Škoda, Adam ; Šotner, Roman (referee) ; Staněk, Miroslav (advisor)
The presented thesis deals with a tube microphone using a condenser microphone capsule for sound capturing. Moreover, two essential aspects of a tube microphone – the basis of its operation and its design – are also discussed in this thesis. In the designed microphone, there is a vacuum tube known as ECC81. This vacuum tube is used as an amplifying element of an input sound signal. This paper also includes the choice of the most suitable microphone circuit, its modification and the design of a voltage source used for feeding and heating the vacuum tube. Some appropriate simulations were applied to find out the functionality of all designed parts of the microphone system. Following step was the practical realization of all microphone parts as well as the activation and the complete parameters and characteristics measurements of realized microphone system. After the provided measurements, the microphone was compared to equivalent commercial products. Evidently, the realized microphone is qualitatively similar to other commercial products. Presented thesis also contains the list of components and PCBs.
|
|
|
Guitar tube preamplifier with digitally controlled presets
Malinčík, Ondrej ; Pavlík, Michal (referee) ; Háze, Jiří (advisor)
Aim of this work is design of guitar tube preamplifier which tone corrections and gain control is controlled electronicaly using digital potentiometers with ability to saving these values to memory. This work analyses and discuss used circuitry in design and presents demonstration of possible replacement of mechanical potenciometer with digital one in the conclusion.
|
|
|
Detection of ionize radiation with Geiger-Müller tube
Dědina, Radim ; Macků, Jan (referee) ; Musil, Vladislav (advisor)
This work deals with problems related with detection and measuring of the ionisated radiation. First part of this work is devoted to theoretical problems of detection, particulary to measuring with Geiger Muller tubes. Second part of the work contains proposal of electronical circuit using Geiger Muller tube as well as description of results experimentally acquired while using the detector, which was manufactured according to the proposed scheme. On the basis of those results it appears that proposed apparatus can be used for significant indication range extension.
|
|
|
Design and construction of a tube guitar amplifier
Šona, Štěpán ; Dvořák, Jan (referee) ; Kubánek, David (advisor)
The text of this bachelor’s thesis deals with the design, simulation and construction of a tube amplifier for electric guitar, based on the well-known guitar amplifier VOX AC 30. The theoretical part deals with the design and simulation of the original circuit. Subsequently, adjustments were made on both channels and simulated. The practical part of the work already deals with the construction itself, measuring the finished guitar combo. Frequency modulus characteristics, harmonic distortion, spectra and time courses of signals for distorted and clear channel were measured. Then the measurement was evaluated.
|
|
|
Testing of Surge Arresters
Jeřábek, Lukáš ; Paar, Martin (referee) ; Krbal, Michal (advisor)
This bachelor's thesis is devoted to metal oxide surge arresters. After historical and theoretical introduction, which explains their principles and describes their characteristical properties, analysis of the standard IEC 60099-4 and testing according to the standard with focus on the type tests follows. This chapter is also amended with review of the standard's imperfections and with its most probable future development. The work concludes with a market survey, a review of the largest manufacturers and a comparison of their products.
|
guest ::
